Viewing file:  miscadmin.h (16.67 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*-------------------------------------------------------------------------
*
* miscadmin.h
* This file contains general postgres administration and initialization
* stuff that used to be spread out between the following files:
* globals.h global variables
* pdir.h directory path crud
* pinit.h postgres initialization
* pmod.h processing modes
* Over time, this has also become the preferred place for widely known
* resource-limitation stuff, such as work_mem and check_stack_depth().
*
* Portions Copyright (c) 1996-2016, PostgreSQL Global Development Group
* Portions Copyright (c) 1994, Regents of the University of California
*
* src/include/miscadmin.h
*
* NOTES
* some of the information in this file should be moved to other files.
*
*-------------------------------------------------------------------------
*/
#ifndef MISCADMIN_H
#define MISCADMIN_H
#include <signal.h>
#include "pgtime.h" /* for pg_time_t */
#define PG_BACKEND_VERSIONSTR "postgres (PostgreSQL) " PG_VERSION "\n"
#define InvalidPid (-1)
/*****************************************************************************
* System interrupt and critical section handling
*
* There are two types of interrupts that a running backend needs to accept
* without messing up its state: QueryCancel (SIGINT) and ProcDie (SIGTERM).
* In both cases, we need to be able to clean up the current transaction
* gracefully, so we can't respond to the interrupt instantaneously ---
* there's no guarantee that internal data structures would be self-consistent
* if the code is interrupted at an arbitrary instant. Instead, the signal
* handlers set flags that are checked periodically during execution.
*
* The CHECK_FOR_INTERRUPTS() macro is called at strategically located spots
* where it is normally safe to accept a cancel or die interrupt. In some
* cases, we invoke CHECK_FOR_INTERRUPTS() inside low-level subroutines that
* might sometimes be called in contexts that do *not* want to allow a cancel
* or die interrupt. The HOLD_INTERRUPTS() and RESUME_INTERRUPTS() macros
* allow code to ensure that no cancel or die interrupt will be accepted,
* even if CHECK_FOR_INTERRUPTS() gets called in a subroutine. The interrupt
* will be held off until CHECK_FOR_INTERRUPTS() is done outside any
* HOLD_INTERRUPTS() ... RESUME_INTERRUPTS() section.
*
* There is also a mechanism to prevent query cancel interrupts, while still
* allowing die interrupts: HOLD_CANCEL_INTERRUPTS() and
* RESUME_CANCEL_INTERRUPTS().
*
* Note that ProcessInterrupts() has also acquired a number of tasks that
* do not necessarily cause a query-cancel-or-die response. Hence, it's
* possible that it will just clear InterruptPending and return.
*
* INTERRUPTS_PENDING_CONDITION() can be checked to see whether an
* interrupt needs to be serviced, without trying to do so immediately.
* Some callers are also interested in INTERRUPTS_CAN_BE_PROCESSED(),
* which tells whether ProcessInterrupts is sure to clear the interrupt.
*
* Special mechanisms are used to let an interrupt be accepted when we are
* waiting for a lock or when we are waiting for command input (but, of
* course, only if the interrupt holdoff counter is zero). See the
* related code for details.
*
* A lost connection is handled similarly, although the loss of connection
* does not raise a signal, but is detected when we fail to write to the
* socket. If there was a signal for a broken connection, we could make use of
* it by setting ClientConnectionLost in the signal handler.
*
* A related, but conceptually distinct, mechanism is the "critical section"
* mechanism. A critical section not only holds off cancel/die interrupts,
* but causes any ereport(ERROR) or ereport(FATAL) to become ereport(PANIC)
* --- that is, a system-wide reset is forced. Needless to say, only really
* *critical* code should be marked as a critical section! Currently, this
* mechanism is only used for XLOG-related code.
*
*****************************************************************************/
/* in globals.c */
/* these are marked volatile because they are set by signal handlers: */
extern PGDLLIMPORT volatile bool InterruptPending;
extern PGDLLIMPORT volatile bool QueryCancelPending;
extern PGDLLIMPORT volatile bool ProcDiePending;
extern PGDLLIMPORT volatile bool IdleInTransactionSessionTimeoutPending;
extern PGDLLIMPORT volatile sig_atomic_t ConfigReloadPending;
extern volatile bool ClientConnectionLost;
/* these are marked volatile because they are examined by signal handlers: */
extern PGDLLIMPORT volatile uint32 InterruptHoldoffCount;
extern PGDLLIMPORT volatile uint32 QueryCancelHoldoffCount;
extern PGDLLIMPORT volatile uint32 CritSectionCount;
/* in tcop/postgres.c */
extern void ProcessInterrupts(void);
/* Test whether an interrupt is pending */
#ifndef WIN32
#define INTERRUPTS_PENDING_CONDITION() \
(InterruptPending)
#else
#define INTERRUPTS_PENDING_CONDITION() \
(UNBLOCKED_SIGNAL_QUEUE() ? pgwin32_dispatch_queued_signals() : 0, \
InterruptPending)
#endif
/* Service interrupt, if one is pending and it's safe to service it now */
#define CHECK_FOR_INTERRUPTS() \
do { \
if (INTERRUPTS_PENDING_CONDITION()) \
ProcessInterrupts(); \
} while(0)
/* Is ProcessInterrupts() guaranteed to clear InterruptPending? */
#define INTERRUPTS_CAN_BE_PROCESSED() \
(InterruptHoldoffCount == 0 && CritSectionCount == 0 && \
QueryCancelHoldoffCount == 0)
#define HOLD_INTERRUPTS() (InterruptHoldoffCount++)
#define RESUME_INTERRUPTS() \
do { \
Assert(InterruptHoldoffCount > 0); \
InterruptHoldoffCount--; \
} while(0)
#define HOLD_CANCEL_INTERRUPTS() (QueryCancelHoldoffCount++)
#define RESUME_CANCEL_INTERRUPTS() \
do { \
Assert(QueryCancelHoldoffCount > 0); \
QueryCancelHoldoffCount--; \
} while(0)
#define START_CRIT_SECTION() (CritSectionCount++)
#define END_CRIT_SECTION() \
do { \
Assert(CritSectionCount > 0); \
CritSectionCount--; \
} while(0)
/*****************************************************************************
* globals.h -- *
*****************************************************************************/
/*
* from utils/init/globals.c
*/
extern PGDLLIMPORT pid_t PostmasterPid;
extern bool IsPostmasterEnvironment;
extern PGDLLIMPORT bool IsUnderPostmaster;
extern bool IsBackgroundWorker;
extern PGDLLIMPORT bool IsBinaryUpgrade;
extern PGDLLIMPORT bool ExitOnAnyError;
extern PGDLLIMPORT char *DataDir;
extern PGDLLIMPORT int NBuffers;
extern PGDLLIMPORT int MaxBackends;
extern PGDLLIMPORT int MaxConnections;
extern PGDLLIMPORT int max_worker_processes;
extern PGDLLIMPORT int MyProcPid;
extern PGDLLIMPORT pg_time_t MyStartTime;
extern PGDLLIMPORT struct Port *MyProcPort;
extern PGDLLIMPORT struct Latch *MyLatch;
extern long MyCancelKey;
extern int MyPMChildSlot;
extern char OutputFileName[];
extern PGDLLIMPORT char my_exec_path[];
extern char pkglib_path[];
#ifdef EXEC_BACKEND
extern char postgres_exec_path[];
#endif
/*
* done in storage/backendid.h for now.
*
* extern BackendId MyBackendId;
*/
extern PGDLLIMPORT Oid MyDatabaseId;
extern PGDLLIMPORT Oid MyDatabaseTableSpace;
/*
* Date/Time Configuration
*
* DateStyle defines the output formatting choice for date/time types:
* USE_POSTGRES_DATES specifies traditional Postgres format
* USE_ISO_DATES specifies ISO-compliant format
* USE_SQL_DATES specifies Oracle/Ingres-compliant format
* USE_GERMAN_DATES specifies German-style dd.mm/yyyy
*
* DateOrder defines the field order to be assumed when reading an
* ambiguous date (anything not in YYYY-MM-DD format, with a four-digit
* year field first, is taken to be ambiguous):
* DATEORDER_YMD specifies field order yy-mm-dd
* DATEORDER_DMY specifies field order dd-mm-yy ("European" convention)
* DATEORDER_MDY specifies field order mm-dd-yy ("US" convention)
*
* In the Postgres and SQL DateStyles, DateOrder also selects output field
* order: day comes before month in DMY style, else month comes before day.
*
* The user-visible "DateStyle" run-time parameter subsumes both of these.
*/
/* valid DateStyle values */
#define USE_POSTGRES_DATES 0
#define USE_ISO_DATES 1
#define USE_SQL_DATES 2
#define USE_GERMAN_DATES 3
#define USE_XSD_DATES 4
/* valid DateOrder values */
#define DATEORDER_YMD 0
#define DATEORDER_DMY 1
#define DATEORDER_MDY 2
extern PGDLLIMPORT int DateStyle;
extern PGDLLIMPORT int DateOrder;
/*
* IntervalStyles
* INTSTYLE_POSTGRES Like Postgres < 8.4 when DateStyle = 'iso'
* INTSTYLE_POSTGRES_VERBOSE Like Postgres < 8.4 when DateStyle != 'iso'
* INTSTYLE_SQL_STANDARD SQL standard interval literals
* INTSTYLE_ISO_8601 ISO-8601-basic formatted intervals
*/
#define INTSTYLE_POSTGRES 0
#define INTSTYLE_POSTGRES_VERBOSE 1
#define INTSTYLE_SQL_STANDARD 2
#define INTSTYLE_ISO_8601 3
extern PGDLLIMPORT int IntervalStyle;
#define MAXTZLEN 10 /* max TZ name len, not counting tr. null */
extern bool enableFsync;
extern PGDLLIMPORT bool allowSystemTableMods;
extern PGDLLIMPORT int work_mem;
extern PGDLLIMPORT int maintenance_work_mem;
extern PGDLLIMPORT int replacement_sort_tuples;
extern int VacuumCostPageHit;
extern int VacuumCostPageMiss;
extern int VacuumCostPageDirty;
extern int VacuumCostLimit;
extern int VacuumCostDelay;
extern int VacuumPageHit;
extern int VacuumPageMiss;
extern int VacuumPageDirty;
extern int VacuumCostBalance;
extern bool VacuumCostActive;
/* in tcop/postgres.c */
#if defined(__ia64__) || defined(__ia64)
typedef struct
{
char *stack_base_ptr;
char *register_stack_base_ptr;
} pg_stack_base_t;
#else
typedef char *pg_stack_base_t;
#endif
extern pg_stack_base_t set_stack_base(void);
extern void restore_stack_base(pg_stack_base_t base);
extern void check_stack_depth(void);
extern bool stack_is_too_deep(void);
extern void PostgresSigHupHandler(SIGNAL_ARGS);
/* in tcop/utility.c */
extern void PreventCommandIfReadOnly(const char *cmdname);
extern void PreventCommandIfParallelMode(const char *cmdname);
extern void PreventCommandDuringRecovery(const char *cmdname);
/* in utils/misc/guc.c */
extern int trace_recovery_messages;
extern int trace_recovery(int trace_level);
/*****************************************************************************
* pdir.h -- *
* POSTGRES directory path definitions. *
*****************************************************************************/
/* flags to be OR'd to form sec_context */
#define SECURITY_LOCAL_USERID_CHANGE 0x0001
#define SECURITY_RESTRICTED_OPERATION 0x0002
#define SECURITY_NOFORCE_RLS 0x0004
extern char *DatabasePath;
/* now in utils/init/miscinit.c */
extern void InitPostmasterChild(void);
extern void InitStandaloneProcess(const char *argv0);
extern void SetDatabasePath(const char *path);
extern char *GetUserNameFromId(Oid roleid, bool noerr);
extern Oid GetUserId(void);
extern Oid GetOuterUserId(void);
extern Oid GetSessionUserId(void);
extern Oid GetAuthenticatedUserId(void);
extern void GetUserIdAndSecContext(Oid *userid, int *sec_context);
extern void SetUserIdAndSecContext(Oid userid, int sec_context);
extern bool InLocalUserIdChange(void);
extern bool InSecurityRestrictedOperation(void);
extern bool InNoForceRLSOperation(void);
extern void GetUserIdAndContext(Oid *userid, bool *sec_def_context);
extern void SetUserIdAndContext(Oid userid, bool sec_def_context);
extern void InitializeSessionUserId(const char *rolename, Oid useroid);
extern void InitializeSessionUserIdStandalone(void);
extern void SetSessionAuthorization(Oid userid, bool is_superuser);
extern Oid GetCurrentRoleId(void);
extern void SetCurrentRoleId(Oid roleid, bool is_superuser);
extern void SetDataDir(const char *dir);
extern void ChangeToDataDir(void);
extern void SwitchToSharedLatch(void);
extern void SwitchBackToLocalLatch(void);
/* in utils/misc/superuser.c */
extern bool superuser(void); /* current user is superuser */
extern bool superuser_arg(Oid roleid); /* given user is superuser */
/*****************************************************************************
* pmod.h -- *
* POSTGRES processing mode definitions. *
*****************************************************************************/
/*
* Description:
* There are three processing modes in POSTGRES. They are
* BootstrapProcessing or "bootstrap," InitProcessing or
* "initialization," and NormalProcessing or "normal."
*
* The first two processing modes are used during special times. When the
* system state indicates bootstrap processing, transactions are all given
* transaction id "one" and are consequently guaranteed to commit. This mode
* is used during the initial generation of template databases.
*
* Initialization mode: used while starting a backend, until all normal
* initialization is complete. Some code behaves differently when executed
* in this mode to enable system bootstrapping.
*
* If a POSTGRES backend process is in normal mode, then all code may be
* executed normally.
*/
typedef enum ProcessingMode
{
BootstrapProcessing, /* bootstrap creation of template database */
InitProcessing, /* initializing system */
NormalProcessing /* normal processing */
} ProcessingMode;
extern ProcessingMode Mode;
#define IsBootstrapProcessingMode() (Mode == BootstrapProcessing)
#define IsInitProcessingMode() (Mode == InitProcessing)
#define IsNormalProcessingMode() (Mode == NormalProcessing)
#define GetProcessingMode() Mode
#define SetProcessingMode(mode) \
do { \
AssertArg((mode) == BootstrapProcessing || \
(mode) == InitProcessing || \
(mode) == NormalProcessing); \
Mode = (mode); \
} while(0)
/*
* Auxiliary-process type identifiers. These used to be in bootstrap.h
* but it seems saner to have them here, with the ProcessingMode stuff.
* The MyAuxProcType global is defined and set in bootstrap.c.
*/
typedef enum
{
NotAnAuxProcess = -1,
CheckerProcess = 0,
BootstrapProcess,
StartupProcess,
BgWriterProcess,
CheckpointerProcess,
WalWriterProcess,
WalReceiverProcess,
NUM_AUXPROCTYPES /* Must be last! */
} AuxProcType;
extern AuxProcType MyAuxProcType;
#define AmBootstrapProcess() (MyAuxProcType == BootstrapProcess)
#define AmStartupProcess() (MyAuxProcType == StartupProcess)
#define AmBackgroundWriterProcess() (MyAuxProcType == BgWriterProcess)
#define AmCheckpointerProcess() (MyAuxProcType == CheckpointerProcess)
#define AmWalWriterProcess() (MyAuxProcType == WalWriterProcess)
#define AmWalReceiverProcess() (MyAuxProcType == WalReceiverProcess)
/*****************************************************************************
* pinit.h -- *
* POSTGRES initialization and cleanup definitions. *
*****************************************************************************/
/* in utils/init/postinit.c */
extern void pg_split_opts(char **argv, int *argcp, const char *optstr);
extern void InitializeMaxBackends(void);
extern void InitPostgres(const char *in_dbname, Oid dboid, const char *username,
Oid useroid, char *out_dbname);
extern void BaseInit(void);
/* in utils/init/miscinit.c */
extern bool IgnoreSystemIndexes;
extern PGDLLIMPORT bool process_shared_preload_libraries_in_progress;
extern char *session_preload_libraries_string;
extern char *shared_preload_libraries_string;
extern char *local_preload_libraries_string;
/*
* As of 9.1, the contents of the data-directory lock file are:
*
* line #
* 1 postmaster PID (or negative of a standalone backend's PID)
* 2 data directory path
* 3 postmaster start timestamp (time_t representation)
* 4 port number
* 5 first Unix socket directory path (empty if none)
* 6 first listen_address (IP address or "*"; empty if no TCP port)
* 7 shared memory key (not present on Windows)
*
* Lines 6 and up are added via AddToDataDirLockFile() after initial file
* creation.
*
* The socket lock file, if used, has the same contents as lines 1-5.
*/
#define LOCK_FILE_LINE_PID 1
#define LOCK_FILE_LINE_DATA_DIR 2
#define LOCK_FILE_LINE_START_TIME 3
#define LOCK_FILE_LINE_PORT 4
#define LOCK_FILE_LINE_SOCKET_DIR 5
#define LOCK_FILE_LINE_LISTEN_ADDR 6
#define LOCK_FILE_LINE_SHMEM_KEY 7
extern void CreateDataDirLockFile(bool amPostmaster);
extern void CreateSocketLockFile(const char *socketfile, bool amPostmaster,
const char *socketDir);
extern void TouchSocketLockFiles(void);
extern void AddToDataDirLockFile(int target_line, const char *str);
extern bool RecheckDataDirLockFile(void);
extern void ValidatePgVersion(const char *path);
extern void process_shared_preload_libraries(void);
extern void process_session_preload_libraries(void);
extern void pg_bindtextdomain(const char *domain);
extern bool has_rolreplication(Oid roleid);
/* in access/transam/xlog.c */
extern bool BackupInProgress(void);
extern void CancelBackup(void);
#endif /* MISCADMIN_H */
|