Viewing file:  tcl.h (82.73 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* tcl.h --
*
* This header file describes the externally-visible facilities
* of the Tcl interpreter.
*
* Copyright (c) 1987-1994 The Regents of the University of California.
* Copyright (c) 1993-1996 Lucent Technologies.
* Copyright (c) 1994-1998 Sun Microsystems, Inc.
* Copyright (c) 1998-2000 by Scriptics Corporation.
* Copyright (c) 2002 by Kevin B. Kenny. All rights reserved.
*
* See the file "license.terms" for information on usage and redistribution
* of this file, and for a DISCLAIMER OF ALL WARRANTIES.
*
* RCS: @(#) $Id: tcl.h,v 1.153.2.8 2003/10/22 22:35:46 andreas_kupries Exp $
*/
#ifndef _TCL
#define _TCL
/*
* For C++ compilers, use extern "C"
*/
#ifdef __cplusplus
extern "C" {
#endif
/*
* The following defines are used to indicate the various release levels.
*/
#define TCL_ALPHA_RELEASE 0
#define TCL_BETA_RELEASE 1
#define TCL_FINAL_RELEASE 2
/*
* When version numbers change here, must also go into the following files
* and update the version numbers:
*
* library/init.tcl (only if Major.minor changes, not patchlevel) 1 LOC
* unix/configure.in (2 LOC Major, 2 LOC minor, 1 LOC patch)
* win/configure.in (as above)
* win/tcl.m4 (not patchlevel)
* win/makefile.vc (not patchlevel) 2 LOC
* README (sections 0 and 2)
* mac/README (2 LOC, not patchlevel)
* macosx/Tcl.pbproj/project.pbxproj (not patchlevel) 2 LOC
* win/README.binary (sections 0-4)
* win/README (not patchlevel) (sections 0 and 2)
* unix/tcl.spec (2 LOC Major/Minor, 1 LOC patch)
* tests/basic.test (1 LOC M/M, not patchlevel)
* tools/tcl.hpj.in (not patchlevel, for windows installer)
* tools/tcl.wse.in (for windows installer)
* tools/tclSplash.bmp (not patchlevel)
*/
#define TCL_MAJOR_VERSION 8
#define TCL_MINOR_VERSION 4
#define TCL_RELEASE_LEVEL TCL_FINAL_RELEASE
#define TCL_RELEASE_SERIAL 5
#define TCL_VERSION "8.4"
#define TCL_PATCH_LEVEL "8.4.5"
/*
* The following definitions set up the proper options for Windows
* compilers. We use this method because there is no autoconf equivalent.
*/
#ifndef __WIN32__
# if defined(_WIN32) || defined(WIN32) || defined(__MINGW32__) || defined(__BORLANDC__)
# define __WIN32__
# ifndef WIN32
# define WIN32
# endif
# endif
#endif
/*
* STRICT: See MSDN Article Q83456
*/
#ifdef __WIN32__
# ifndef STRICT
# define STRICT
# endif
#endif /* __WIN32__ */
/*
* The following definitions set up the proper options for Macintosh
* compilers. We use this method because there is no autoconf equivalent.
*/
#ifdef MAC_TCL
#include <ConditionalMacros.h>
# ifndef USE_TCLALLOC
# define USE_TCLALLOC 1
# endif
# ifndef NO_STRERROR
# define NO_STRERROR 1
# endif
# define INLINE
#endif
/*
* Utility macros: STRINGIFY takes an argument and wraps it in "" (double
* quotation marks), JOIN joins two arguments.
*/
#ifndef STRINGIFY
# define STRINGIFY(x) STRINGIFY1(x)
# define STRINGIFY1(x) #x
#endif
#ifndef JOIN
# define JOIN(a,b) JOIN1(a,b)
# define JOIN1(a,b) a##b
#endif
/*
* A special definition used to allow this header file to be included
* from windows or mac resource files so that they can obtain version
* information. RC_INVOKED is defined by default by the windows RC tool
* and manually set for macintosh.
*
* Resource compilers don't like all the C stuff, like typedefs and
* procedure declarations, that occur below, so block them out.
*/
#ifndef RC_INVOKED
/*
* Special macro to define mutexes, that doesn't do anything
* if we are not using threads.
*/
#ifdef TCL_THREADS
#define TCL_DECLARE_MUTEX(name) static Tcl_Mutex name;
#else
#define TCL_DECLARE_MUTEX(name)
#endif
/*
* Macros that eliminate the overhead of the thread synchronization
* functions when compiling without thread support.
*/
#ifndef TCL_THREADS
#define Tcl_MutexLock(mutexPtr)
#define Tcl_MutexUnlock(mutexPtr)
#define Tcl_MutexFinalize(mutexPtr)
#define Tcl_ConditionNotify(condPtr)
#define Tcl_ConditionWait(condPtr, mutexPtr, timePtr)
#define Tcl_ConditionFinalize(condPtr)
#endif /* TCL_THREADS */
#ifndef BUFSIZ
# include <stdio.h>
#endif
/*
* Definitions that allow Tcl functions with variable numbers of
* arguments to be used with either varargs.h or stdarg.h. TCL_VARARGS
* is used in procedure prototypes. TCL_VARARGS_DEF is used to declare
* the arguments in a function definiton: it takes the type and name of
* the first argument and supplies the appropriate argument declaration
* string for use in the function definition. TCL_VARARGS_START
* initializes the va_list data structure and returns the first argument.
*/
#if !defined(NO_STDARG)
# include <stdarg.h>
# define TCL_VARARGS(type, name) (type name, ...)
# define TCL_VARARGS_DEF(type, name) (type name, ...)
# define TCL_VARARGS_START(type, name, list) (va_start(list, name), name)
#else
# include <varargs.h>
# define TCL_VARARGS(type, name) ()
# define TCL_VARARGS_DEF(type, name) (va_alist)
# define TCL_VARARGS_START(type, name, list) \
(va_start(list), va_arg(list, type))
#endif
/*
* Macros used to declare a function to be exported by a DLL.
* Used by Windows, maps to no-op declarations on non-Windows systems.
* The default build on windows is for a DLL, which causes the DLLIMPORT
* and DLLEXPORT macros to be nonempty. To build a static library, the
* macro STATIC_BUILD should be defined.
*/
#ifdef STATIC_BUILD
# define DLLIMPORT
# define DLLEXPORT
#else
# if (defined(__WIN32__) && (defined(_MSC_VER) || (__BORLANDC__ >= 0x0550) || (defined(__GNUC__) && defined(__declspec)))) || (defined(MAC_TCL) && FUNCTION_DECLSPEC)
# define DLLIMPORT __declspec(dllimport)
# define DLLEXPORT __declspec(dllexport)
# else
# define DLLIMPORT
# define DLLEXPORT
# endif
#endif
/*
* These macros are used to control whether functions are being declared for
* import or export. If a function is being declared while it is being built
* to be included in a shared library, then it should have the DLLEXPORT
* storage class. If is being declared for use by a module that is going to
* link against the shared library, then it should have the DLLIMPORT storage
* class. If the symbol is beind declared for a static build or for use from a
* stub library, then the storage class should be empty.
*
* The convention is that a macro called BUILD_xxxx, where xxxx is the
* name of a library we are building, is set on the compile line for sources
* that are to be placed in the library. When this macro is set, the
* storage class will be set to DLLEXPORT. At the end of the header file, the
* storage class will be reset to DLLIMPORT.
*/
#undef TCL_STORAGE_CLASS
#ifdef BUILD_tcl
# define TCL_STORAGE_CLASS DLLEXPORT
#else
# ifdef USE_TCL_STUBS
# define TCL_STORAGE_CLASS
# else
# define TCL_STORAGE_CLASS DLLIMPORT
# endif
#endif
/*
* Definitions that allow this header file to be used either with or
* without ANSI C features like function prototypes.
*/
#undef _ANSI_ARGS_
#undef CONST
#ifndef INLINE
# define INLINE
#endif
#ifndef NO_CONST
# define CONST const
#else
# define CONST
#endif
#ifndef NO_PROTOTYPES
# define _ANSI_ARGS_(x) x
#else
# define _ANSI_ARGS_(x) ()
#endif
#ifdef USE_NON_CONST
# ifdef USE_COMPAT_CONST
# error define at most one of USE_NON_CONST and USE_COMPAT_CONST
# endif
# define CONST84
# define CONST84_RETURN
#else
# ifdef USE_COMPAT_CONST
# define CONST84
# define CONST84_RETURN CONST
# else
# define CONST84 CONST
# define CONST84_RETURN CONST
# endif
#endif
/*
* Make sure EXTERN isn't defined elsewhere
*/
#ifdef EXTERN
# undef EXTERN
#endif /* EXTERN */
#ifdef __cplusplus
# define EXTERN extern "C" TCL_STORAGE_CLASS
#else
# define EXTERN extern TCL_STORAGE_CLASS
#endif
/*
* The following code is copied from winnt.h.
* If we don't replicate it here, then <windows.h> can't be included
* after tcl.h, since tcl.h also defines VOID.
* This block is skipped under Cygwin and Mingw.
*
*
*/
#if defined(__WIN32__) && !defined(HAVE_WINNT_IGNORE_VOID)
#ifndef VOID
#define VOID void
typedef char CHAR;
typedef short SHORT;
typedef long LONG;
#endif
#endif /* __WIN32__ && !HAVE_WINNT_IGNORE_VOID */
/*
* Macro to use instead of "void" for arguments that must have
* type "void *" in ANSI C; maps them to type "char *" in
* non-ANSI systems.
*/
#ifndef NO_VOID
# define VOID void
#else
# define VOID char
#endif
/*
* Miscellaneous declarations.
*/
#ifndef NULL
# define NULL 0
#endif
#ifndef _CLIENTDATA
# ifndef NO_VOID
typedef void *ClientData;
# else
typedef int *ClientData;
# endif
# define _CLIENTDATA
#endif
/*
* Define Tcl_WideInt to be a type that is (at least) 64-bits wide,
* and define Tcl_WideUInt to be the unsigned variant of that type
* (assuming that where we have one, we can have the other.)
*
* Also defines the following macros:
* TCL_WIDE_INT_IS_LONG - if wide ints are really longs (i.e. we're on
* a real 64-bit system.)
* Tcl_WideAsLong - forgetful converter from wideInt to long.
* Tcl_LongAsWide - sign-extending converter from long to wideInt.
* Tcl_WideAsDouble - converter from wideInt to double.
* Tcl_DoubleAsWide - converter from double to wideInt.
*
* The following invariant should hold for any long value 'longVal':
* longVal == Tcl_WideAsLong(Tcl_LongAsWide(longVal))
*
* Note on converting between Tcl_WideInt and strings. This
* implementation (in tclObj.c) depends on the functions strtoull()
* and sprintf(...,"%" TCL_LL_MODIFIER "d",...). TCL_LL_MODIFIER_SIZE
* is the length of the modifier string, which is "ll" on most 32-bit
* Unix systems. It has to be split up like this to allow for the more
* complex formats sometimes needed (e.g. in the format(n) command.)
*/
#if !defined(TCL_WIDE_INT_TYPE)&&!defined(TCL_WIDE_INT_IS_LONG)
# if defined(__CYGWIN__)
# define TCL_WIDE_INT_TYPE long long
# define TCL_LL_MODIFIER "L"
typedef struct stat Tcl_StatBuf;
# define TCL_LL_MODIFIER_SIZE 1
# elif defined(__WIN32__)
# define TCL_WIDE_INT_TYPE __int64
# ifdef __BORLANDC__
typedef struct stati64 Tcl_StatBuf;
# define TCL_LL_MODIFIER "L"
# define TCL_LL_MODIFIER_SIZE 1
# else /* __BORLANDC__ */
typedef struct _stati64 Tcl_StatBuf;
# define TCL_LL_MODIFIER "I64"
# define TCL_LL_MODIFIER_SIZE 3
# endif /* __BORLANDC__ */
# else /* __WIN32__ */
/*
* Don't know what platform it is and configure hasn't discovered what
* is going on for us. Try to guess...
*/
# ifdef NO_LIMITS_H
# error please define either TCL_WIDE_INT_TYPE or TCL_WIDE_INT_IS_LONG
# else /* !NO_LIMITS_H */
# include <limits.h>
# if (INT_MAX < LONG_MAX)
# define TCL_WIDE_INT_IS_LONG 1
# else
# define TCL_WIDE_INT_TYPE long long
# endif
# endif /* NO_LIMITS_H */
# endif /* __WIN32__ */
#endif /* !TCL_WIDE_INT_TYPE & !TCL_WIDE_INT_IS_LONG */
#ifdef TCL_WIDE_INT_IS_LONG
# undef TCL_WIDE_INT_TYPE
# define TCL_WIDE_INT_TYPE long
#endif /* TCL_WIDE_INT_IS_LONG */
typedef TCL_WIDE_INT_TYPE Tcl_WideInt;
typedef unsigned TCL_WIDE_INT_TYPE Tcl_WideUInt;
#ifdef TCL_WIDE_INT_IS_LONG
typedef struct stat Tcl_StatBuf;
# define Tcl_WideAsLong(val) ((long)(val))
# define Tcl_LongAsWide(val) ((long)(val))
# define Tcl_WideAsDouble(val) ((double)((long)(val)))
# define Tcl_DoubleAsWide(val) ((long)((double)(val)))
# ifndef TCL_LL_MODIFIER
# define TCL_LL_MODIFIER "l"
# define TCL_LL_MODIFIER_SIZE 1
# endif /* !TCL_LL_MODIFIER */
#else /* TCL_WIDE_INT_IS_LONG */
/*
* The next short section of defines are only done when not running on
* Windows or some other strange platform.
*/
# ifndef TCL_LL_MODIFIER
# ifdef HAVE_STRUCT_STAT64
typedef struct stat64 Tcl_StatBuf;
# else
typedef struct stat Tcl_StatBuf;
# endif /* HAVE_STRUCT_STAT64 */
# define TCL_LL_MODIFIER "ll"
# define TCL_LL_MODIFIER_SIZE 2
# endif /* !TCL_LL_MODIFIER */
# define Tcl_WideAsLong(val) ((long)((Tcl_WideInt)(val)))
# define Tcl_LongAsWide(val) ((Tcl_WideInt)((long)(val)))
# define Tcl_WideAsDouble(val) ((double)((Tcl_WideInt)(val)))
# define Tcl_DoubleAsWide(val) ((Tcl_WideInt)((double)(val)))
#endif /* TCL_WIDE_INT_IS_LONG */
/*
* This flag controls whether binary compatability is maintained with
* extensions built against a previous version of Tcl. This is true
* by default.
*/
#ifndef TCL_PRESERVE_BINARY_COMPATABILITY
# define TCL_PRESERVE_BINARY_COMPATABILITY 1
#endif
/*
* Data structures defined opaquely in this module. The definitions below
* just provide dummy types. A few fields are made visible in Tcl_Interp
* structures, namely those used for returning a string result from
* commands. Direct access to the result field is discouraged in Tcl 8.0.
* The interpreter result is either an object or a string, and the two
* values are kept consistent unless some C code sets interp->result
* directly. Programmers should use either the procedure Tcl_GetObjResult()
* or Tcl_GetStringResult() to read the interpreter's result. See the
* SetResult man page for details.
*
* Note: any change to the Tcl_Interp definition below must be mirrored
* in the "real" definition in tclInt.h.
*
* Note: Tcl_ObjCmdProc procedures do not directly set result and freeProc.
* Instead, they set a Tcl_Obj member in the "real" structure that can be
* accessed with Tcl_GetObjResult() and Tcl_SetObjResult().
*/
#ifndef Tcl_Interp
typedef struct Tcl_Interp
#ifdef USE_TCL_STRUCT
{
char *result; /* If the last command returned a string
* result, this points to it. */
void (*freeProc) _ANSI_ARGS_((char *blockPtr));
/* Zero means the string result is
* statically allocated. TCL_DYNAMIC means
* it was allocated with ckalloc and should
* be freed with ckfree. Other values give
* the address of procedure to invoke to
* free the result. Tcl_Eval must free it
* before executing next command. */
int errorLine; /* When TCL_ERROR is returned, this gives
* the line number within the command where
* the error occurred (1 if first line). */
}
#endif
Tcl_Interp;
#endif
typedef struct Tcl_AsyncHandler_ *Tcl_AsyncHandler;
#ifndef Tcl_Channel
typedef struct Tcl_Channel_ *Tcl_Channel;
#endif
#ifndef Tcl_Command
typedef struct Tcl_Command_ *Tcl_Command;
#endif
typedef struct Tcl_Condition_ *Tcl_Condition;
typedef struct Tcl_EncodingState_ *Tcl_EncodingState;
typedef struct Tcl_Encoding_ *Tcl_Encoding;
typedef struct Tcl_Event Tcl_Event;
typedef struct Tcl_Mutex_ *Tcl_Mutex;
typedef struct Tcl_Pid_ *Tcl_Pid;
#ifndef Tcl_RegExp
typedef struct Tcl_RegExp_ *Tcl_RegExp;
#endif
typedef struct Tcl_ThreadDataKey_ *Tcl_ThreadDataKey;
typedef struct Tcl_ThreadId_ *Tcl_ThreadId;
typedef struct Tcl_TimerToken_ *Tcl_TimerToken;
typedef struct Tcl_Trace_ *Tcl_Trace;
typedef struct Tcl_Var_ *Tcl_Var;
typedef struct Tcl_ChannelTypeVersion_ *Tcl_ChannelTypeVersion;
typedef struct Tcl_LoadHandle_ *Tcl_LoadHandle;
/*
* Definition of the interface to procedures implementing threads.
* A procedure following this definition is given to each call of
* 'Tcl_CreateThread' and will be called as the main fuction of
* the new thread created by that call.
*/
#ifdef MAC_TCL
typedef pascal void *(Tcl_ThreadCreateProc) _ANSI_ARGS_((ClientData clientData));
#elif defined __WIN32__
typedef unsigned (__stdcall Tcl_ThreadCreateProc) _ANSI_ARGS_((ClientData clientData));
#else
typedef void (Tcl_ThreadCreateProc) _ANSI_ARGS_((ClientData clientData));
#endif
/*
* Threading function return types used for abstracting away platform
* differences when writing a Tcl_ThreadCreateProc. See the NewThread
* function in generic/tclThreadTest.c for it's usage.
*/
#ifdef MAC_TCL
# define Tcl_ThreadCreateType pascal void *
# define TCL_THREAD_CREATE_RETURN return NULL
#elif defined __WIN32__
# define Tcl_ThreadCreateType unsigned __stdcall
# define TCL_THREAD_CREATE_RETURN return 0
#else
# define Tcl_ThreadCreateType void
# define TCL_THREAD_CREATE_RETURN
#endif
/*
* Definition of values for default stacksize and the possible flags to be
* given to Tcl_CreateThread.
*/
#define TCL_THREAD_STACK_DEFAULT (0) /* Use default size for stack */
#define TCL_THREAD_NOFLAGS (0000) /* Standard flags, default behaviour */
#define TCL_THREAD_JOINABLE (0001) /* Mark the thread as joinable */
/*
* Flag values passed to Tcl_GetRegExpFromObj.
*/
#define TCL_REG_BASIC 000000 /* BREs (convenience) */
#define TCL_REG_EXTENDED 000001 /* EREs */
#define TCL_REG_ADVF 000002 /* advanced features in EREs */
#define TCL_REG_ADVANCED 000003 /* AREs (which are also EREs) */
#define TCL_REG_QUOTE 000004 /* no special characters, none */
#define TCL_REG_NOCASE 000010 /* ignore case */
#define TCL_REG_NOSUB 000020 /* don't care about subexpressions */
#define TCL_REG_EXPANDED 000040 /* expanded format, white space &
* comments */
#define TCL_REG_NLSTOP 000100 /* \n doesn't match . or [^ ] */
#define TCL_REG_NLANCH 000200 /* ^ matches after \n, $ before */
#define TCL_REG_NEWLINE 000300 /* newlines are line terminators */
#define TCL_REG_CANMATCH 001000 /* report details on partial/limited
* matches */
/*
* The following flag is experimental and only intended for use by Expect. It
* will probably go away in a later release.
*/
#define TCL_REG_BOSONLY 002000 /* prepend \A to pattern so it only
* matches at the beginning of the
* string. */
/*
* Flags values passed to Tcl_RegExpExecObj.
*/
#define TCL_REG_NOTBOL 0001 /* Beginning of string does not match ^. */
#define TCL_REG_NOTEOL 0002 /* End of string does not match $. */
/*
* Structures filled in by Tcl_RegExpInfo. Note that all offset values are
* relative to the start of the match string, not the beginning of the
* entire string.
*/
typedef struct Tcl_RegExpIndices {
long start; /* character offset of first character in match */
long end; /* character offset of first character after the
* match. */
} Tcl_RegExpIndices;
typedef struct Tcl_RegExpInfo {
int nsubs; /* number of subexpressions in the
* compiled expression */
Tcl_RegExpIndices *matches; /* array of nsubs match offset
* pairs */
long extendStart; /* The offset at which a subsequent
* match might begin. */
long reserved; /* Reserved for later use. */
} Tcl_RegExpInfo;
/*
* Picky compilers complain if this typdef doesn't appear before the
* struct's reference in tclDecls.h.
*/
typedef Tcl_StatBuf *Tcl_Stat_;
typedef struct stat *Tcl_OldStat_;
/*
* When a TCL command returns, the interpreter contains a result from the
* command. Programmers are strongly encouraged to use one of the
* procedures Tcl_GetObjResult() or Tcl_GetStringResult() to read the
* interpreter's result. See the SetResult man page for details. Besides
* this result, the command procedure returns an integer code, which is
* one of the following:
*
* TCL_OK Command completed normally; the interpreter's
* result contains the command's result.
* TCL_ERROR The command couldn't be completed successfully;
* the interpreter's result describes what went wrong.
* TCL_RETURN The command requests that the current procedure
* return; the interpreter's result contains the
* procedure's return value.
* TCL_BREAK The command requests that the innermost loop
* be exited; the interpreter's result is meaningless.
* TCL_CONTINUE Go on to the next iteration of the current loop;
* the interpreter's result is meaningless.
*/
#define TCL_OK 0
#define TCL_ERROR 1
#define TCL_RETURN 2
#define TCL_BREAK 3
#define TCL_CONTINUE 4
#define TCL_RESULT_SIZE 200
/*
* Flags to control what substitutions are performed by Tcl_SubstObj():
*/
#define TCL_SUBST_COMMANDS 001
#define TCL_SUBST_VARIABLES 002
#define TCL_SUBST_BACKSLASHES 004
#define TCL_SUBST_ALL 007
/*
* Argument descriptors for math function callbacks in expressions:
*/
typedef enum {
TCL_INT, TCL_DOUBLE, TCL_EITHER, TCL_WIDE_INT
} Tcl_ValueType;
typedef struct Tcl_Value {
Tcl_ValueType type; /* Indicates intValue or doubleValue is
* valid, or both. */
long intValue; /* Integer value. */
double doubleValue; /* Double-precision floating value. */
Tcl_WideInt wideValue; /* Wide (min. 64-bit) integer value. */
} Tcl_Value;
/*
* Forward declaration of Tcl_Obj to prevent an error when the forward
* reference to Tcl_Obj is encountered in the procedure types declared
* below.
*/
#ifndef Tcl_Obj
typedef struct Tcl_Obj Tcl_Obj;
#endif
/*
* Procedure types defined by Tcl:
*/
typedef int (Tcl_AppInitProc) _ANSI_ARGS_((Tcl_Interp *interp));
typedef int (Tcl_AsyncProc) _ANSI_ARGS_((ClientData clientData,
Tcl_Interp *interp, int code));
typedef void (Tcl_ChannelProc) _ANSI_ARGS_((ClientData clientData, int mask));
typedef void (Tcl_CloseProc) _ANSI_ARGS_((ClientData data));
typedef void (Tcl_CmdDeleteProc) _ANSI_ARGS_((ClientData clientData));
typedef int (Tcl_CmdProc) _ANSI_ARGS_((ClientData clientData,
Tcl_Interp *interp, int argc, CONST84 char *argv[]));
typedef void (Tcl_CmdTraceProc) _ANSI_ARGS_((ClientData clientData,
Tcl_Interp *interp, int level, char *command, Tcl_CmdProc *proc,
ClientData cmdClientData, int argc, CONST84 char *argv[]));
typedef int (Tcl_CmdObjTraceProc) _ANSI_ARGS_((ClientData clientData,
Tcl_Interp *interp, int level, CONST char *command,
Tcl_Command commandInfo, int objc, Tcl_Obj * CONST * objv));
typedef void (Tcl_CmdObjTraceDeleteProc) _ANSI_ARGS_((ClientData clientData));
typedef void (Tcl_DupInternalRepProc) _ANSI_ARGS_((Tcl_Obj *srcPtr,
Tcl_Obj *dupPtr));
typedef int (Tcl_EncodingConvertProc)_ANSI_ARGS_((ClientData clientData,
CONST char *src, int srcLen, int flags, Tcl_EncodingState *statePtr,
char *dst, int dstLen, int *srcReadPtr, int *dstWrotePtr,
int *dstCharsPtr));
typedef void (Tcl_EncodingFreeProc)_ANSI_ARGS_((ClientData clientData));
typedef int (Tcl_EventProc) _ANSI_ARGS_((Tcl_Event *evPtr, int flags));
typedef void (Tcl_EventCheckProc) _ANSI_ARGS_((ClientData clientData,
int flags));
typedef int (Tcl_EventDeleteProc) _ANSI_ARGS_((Tcl_Event *evPtr,
ClientData clientData));
typedef void (Tcl_EventSetupProc) _ANSI_ARGS_((ClientData clientData,
int flags));
typedef void (Tcl_ExitProc) _ANSI_ARGS_((ClientData clientData));
typedef void (Tcl_FileProc) _ANSI_ARGS_((ClientData clientData, int mask));
typedef void (Tcl_FileFreeProc) _ANSI_ARGS_((ClientData clientData));
typedef void (Tcl_FreeInternalRepProc) _ANSI_ARGS_((Tcl_Obj *objPtr));
typedef void (Tcl_FreeProc) _ANSI_ARGS_((char *blockPtr));
typedef void (Tcl_IdleProc) _ANSI_ARGS_((ClientData clientData));
typedef void (Tcl_InterpDeleteProc) _ANSI_ARGS_((ClientData clientData,
Tcl_Interp *interp));
typedef int (Tcl_MathProc) _ANSI_ARGS_((ClientData clientData,
Tcl_Interp *interp, Tcl_Value *args, Tcl_Value *resultPtr));
typedef void (Tcl_NamespaceDeleteProc) _ANSI_ARGS_((ClientData clientData));
typedef int (Tcl_ObjCmdProc) _ANSI_ARGS_((ClientData clientData,
Tcl_Interp *interp, int objc, Tcl_Obj * CONST * objv));
typedef int (Tcl_PackageInitProc) _ANSI_ARGS_((Tcl_Interp *interp));
typedef void (Tcl_PanicProc) _ANSI_ARGS_(TCL_VARARGS(CONST char *, format));
typedef void (Tcl_TcpAcceptProc) _ANSI_ARGS_((ClientData callbackData,
Tcl_Channel chan, char *address, int port));
typedef void (Tcl_TimerProc) _ANSI_ARGS_((ClientData clientData));
typedef int (Tcl_SetFromAnyProc) _ANSI_ARGS_((Tcl_Interp *interp,
Tcl_Obj *objPtr));
typedef void (Tcl_UpdateStringProc) _ANSI_ARGS_((Tcl_Obj *objPtr));
typedef char *(Tcl_VarTraceProc) _ANSI_ARGS_((ClientData clientData,
Tcl_Interp *interp, CONST84 char *part1, CONST84 char *part2, int flags));
typedef void (Tcl_CommandTraceProc) _ANSI_ARGS_((ClientData clientData,
Tcl_Interp *interp, CONST char *oldName, CONST char *newName,
int flags));
typedef void (Tcl_CreateFileHandlerProc) _ANSI_ARGS_((int fd, int mask,
Tcl_FileProc *proc, ClientData clientData));
typedef void (Tcl_DeleteFileHandlerProc) _ANSI_ARGS_((int fd));
typedef void (Tcl_AlertNotifierProc) _ANSI_ARGS_((ClientData clientData));
typedef void (Tcl_ServiceModeHookProc) _ANSI_ARGS_((int mode));
typedef ClientData (Tcl_InitNotifierProc) _ANSI_ARGS_((VOID));
typedef void (Tcl_FinalizeNotifierProc) _ANSI_ARGS_((ClientData clientData));
typedef void (Tcl_MainLoopProc) _ANSI_ARGS_((void));
/*
* The following structure represents a type of object, which is a
* particular internal representation for an object plus a set of
* procedures that provide standard operations on objects of that type.
*/
typedef struct Tcl_ObjType
{
char *name; /* Name of the type, e.g. "int". */
Tcl_FreeInternalRepProc *freeIntRepProc;
/* Called to free any storage for the type's
* internal rep. NULL if the internal rep
* does not need freeing. */
Tcl_DupInternalRepProc *dupIntRepProc;
/* Called to create a new object as a copy
* of an existing object. */
Tcl_UpdateStringProc *updateStringProc;
/* Called to update the string rep from the
* type's internal representation. */
Tcl_SetFromAnyProc *setFromAnyProc;
/* Called to convert the object's internal
* rep to this type. Frees the internal rep
* of the old type. Returns TCL_ERROR on
* failure. */
}
Tcl_ObjType;
/*
* One of the following structures exists for each object in the Tcl
* system. An object stores a value as either a string, some internal
* representation, or both.
*/
#ifndef Tcl_Obj
#ifdef USE_TCL_STRUCT
struct Tcl_Obj {
int refCount; /* When 0 the object will be freed. */
char *bytes; /* This points to the first byte of the
* object's string representation. The array
* must be followed by a null byte (i.e., at
* offset length) but may also contain
* embedded null characters. The array's
* storage is allocated by ckalloc. NULL
* means the string rep is invalid and must
* be regenerated from the internal rep.
* Clients should use Tcl_GetStringFromObj
* or Tcl_GetString to get a pointer to the
* byte array as a readonly value. */
int length; /* The number of bytes at *bytes, not
* including the terminating null. */
Tcl_ObjType *typePtr; /* Denotes the object's type. Always
* corresponds to the type of the object's
* internal rep. NULL indicates the object
* has no internal rep (has no type). */
union { /* The internal representation: */
long longValue; /* - an long integer value */
double doubleValue; /* - a double-precision floating value */
VOID *otherValuePtr; /* - another, type-specific value */
Tcl_WideInt wideValue; /* - a long long value */
struct { /* - internal rep as two pointers */
VOID *ptr1;
VOID *ptr2;
} twoPtrValue;
} internalRep;
};
#define TclObjInternal(o) (&((o)->internalRep))
#define TclObjGetType(o) ((o)->typePtr)
#define TclObjSetType(o,t) ((o)->typePtr = (t))
#define TclObjLength(o) ((o)->length)
#endif
#endif
#ifndef USE_TCL_STRUCT
typedef union { /* The internal representation: */
long longValue; /* - an long integer value */
double doubleValue; /* - a double-precision floating value */
VOID *otherValuePtr; /* - another, type-specific value */
struct { /* - internal rep as two pointers */
VOID *ptr1;
VOID *ptr2;
} twoPtrValue;
} Tcl_InternalRep;
#endif
#ifndef TclObjGetType
EXTERN Tcl_ObjType * TclObjGetType _ANSI_ARGS_((Tcl_Obj *objPtr));
#endif
#ifndef TclObjLength
EXTERN int TclObjLength _ANSI_ARGS_((Tcl_Obj *objPtr));
#endif
#ifndef TclObjSetType
EXTERN void TclObjSetType _ANSI_ARGS_((Tcl_Obj *objPtr,Tcl_ObjType *newType));
#endif
#ifndef TclObjInternal
EXTERN Tcl_InternalRep * TclObjInternal _ANSI_ARGS_((Tcl_Obj *objPtr));
#endif
/*
* Macros to increment and decrement a Tcl_Obj's reference count, and to
* test whether an object is shared (i.e. has reference count > 1).
* Note: clients should use Tcl_DecrRefCount() when they are finished using
* an object, and should never call TclFreeObj() directly. TclFreeObj() is
* only defined and made public in tcl.h to support Tcl_DecrRefCount's macro
* definition. Note also that Tcl_DecrRefCount() refers to the parameter
* "obj" twice. This means that you should avoid calling it with an
* expression that is expensive to compute or has side effects.
*/
EXTERN void Tcl_IncrRefCount _ANSI_ARGS_((Tcl_Obj *objPtr));
EXTERN void Tcl_DecrRefCount _ANSI_ARGS_((Tcl_Obj *objPtr));
EXTERN int Tcl_IsShared _ANSI_ARGS_((Tcl_Obj *objPtr));
#ifdef USE_TCL_STRUCT
#ifdef TCL_MEM_DEBUG
# define Tcl_IncrRefCount(objPtr) \
Tcl_DbIncrRefCount(objPtr, __FILE__, __LINE__)
# define Tcl_DecrRefCount(objPtr) \
Tcl_DbDecrRefCount(objPtr, __FILE__, __LINE__)
# define Tcl_IsShared(objPtr) \
Tcl_DbIsShared(objPtr, __FILE__, __LINE__)
#else
# define Tcl_IncrRefCount(objPtr) \
++(objPtr)->refCount
# define Tcl_DecrRefCount(objPtr) \
if (--(objPtr)->refCount <= 0) TclFreeObj(objPtr)
# define Tcl_IsShared(objPtr) \
((objPtr)->refCount > 1)
#endif
#endif
/*
* Macros and definitions that help to debug the use of Tcl objects.
* When TCL_MEM_DEBUG is defined, the Tcl_New declarations are
* overridden to call debugging versions of the object creation procedures.
*/
#ifndef _LANG
#ifdef TCL_MEM_DEBUG
# define Tcl_NewBooleanObj(val) \
Tcl_DbNewBooleanObj(val, __FILE__, __LINE__)
# define Tcl_NewByteArrayObj(bytes, len) \
Tcl_DbNewByteArrayObj(bytes, len, __FILE__, __LINE__)
# define Tcl_NewDoubleObj(val) \
Tcl_DbNewDoubleObj(val, __FILE__, __LINE__)
# define Tcl_NewIntObj(val) \
Tcl_DbNewLongObj(val, __FILE__, __LINE__)
# define Tcl_NewListObj(objc, objv) \
Tcl_DbNewListObj(objc, objv, __FILE__, __LINE__)
# define Tcl_NewLongObj(val) \
Tcl_DbNewLongObj(val, __FILE__, __LINE__)
# define Tcl_NewObj() \
Tcl_DbNewObj(__FILE__, __LINE__)
# define Tcl_NewStringObj(bytes, len) \
Tcl_DbNewStringObj(bytes, len, __FILE__, __LINE__)
# define Tcl_NewWideIntObj(val) \
Tcl_DbNewWideIntObj(val, __FILE__, __LINE__)
#endif /* TCL_MEM_DEBUG */
#endif
/*
* The following structure contains the state needed by
* Tcl_SaveResult. No-one outside of Tcl should access any of these
* fields. This structure is typically allocated on the stack.
*/
typedef struct Tcl_SavedResult
#ifdef USE_TCL_STRUCT
{
char *result;
Tcl_FreeProc *freeProc;
Tcl_Obj *objResultPtr;
char *appendResult;
int appendAvl;
int appendUsed;
char resultSpace[TCL_RESULT_SIZE+1];
}
#endif
Tcl_SavedResult;
/*
* The following definitions support Tcl's namespace facility.
* Note: the first five fields must match exactly the fields in a
* Namespace structure (see tclInt.h).
*/
typedef struct Tcl_Namespace
#ifdef USE_TCL_STRUCT
{
char *name; /* The namespace's name within its parent
* namespace. This contains no ::'s. The
* name of the global namespace is ""
* although "::" is an synonym. */
char *fullName; /* The namespace's fully qualified name.
* This starts with ::. */
ClientData clientData; /* Arbitrary value associated with this
* namespace. */
Tcl_NamespaceDeleteProc* deleteProc;
/* Procedure invoked when deleting the
* namespace to, e.g., free clientData. */
struct Tcl_Namespace* parentPtr;
/* Points to the namespace that contains
* this one. NULL if this is the global
* namespace. */
}
#endif
Tcl_Namespace;
/*
* The following structure represents a call frame, or activation record.
* A call frame defines a naming context for a procedure call: its local
* scope (for local variables) and its namespace scope (used for non-local
* variables; often the global :: namespace). A call frame can also define
* the naming context for a namespace eval or namespace inscope command:
* the namespace in which the command's code should execute. The
* Tcl_CallFrame structures exist only while procedures or namespace
* eval/inscope's are being executed, and provide a Tcl call stack.
*
* A call frame is initialized and pushed using Tcl_PushCallFrame and
* popped using Tcl_PopCallFrame. Storage for a Tcl_CallFrame must be
* provided by the Tcl_PushCallFrame caller, and callers typically allocate
* them on the C call stack for efficiency. For this reason, Tcl_CallFrame
* is defined as a structure and not as an opaque token. However, most
* Tcl_CallFrame fields are hidden since applications should not access
* them directly; others are declared as "dummyX".
*
* WARNING!! The structure definition must be kept consistent with the
* CallFrame structure in tclInt.h. If you change one, change the other.
*/
typedef struct Tcl_CallFrame
#ifdef USE_TCL_STRUCT
{
Tcl_Namespace *nsPtr;
int dummy1;
int dummy2;
char *dummy3;
char *dummy4;
char *dummy5;
int dummy6;
char *dummy7;
char *dummy8;
int dummy9;
char* dummy10;
}
#endif
Tcl_CallFrame;
/*
* Information about commands that is returned by Tcl_GetCommandInfo and
* passed to Tcl_SetCommandInfo. objProc is an objc/objv object-based
* command procedure while proc is a traditional Tcl argc/argv
* string-based procedure. Tcl_CreateObjCommand and Tcl_CreateCommand
* ensure that both objProc and proc are non-NULL and can be called to
* execute the command. However, it may be faster to call one instead of
* the other. The member isNativeObjectProc is set to 1 if an
* object-based procedure was registered by Tcl_CreateObjCommand, and to
* 0 if a string-based procedure was registered by Tcl_CreateCommand.
* The other procedure is typically set to a compatibility wrapper that
* does string-to-object or object-to-string argument conversions then
* calls the other procedure.
*/
typedef struct Tcl_CmdInfo {
int isNativeObjectProc; /* 1 if objProc was registered by a call to
* Tcl_CreateObjCommand; 0 otherwise.
* Tcl_SetCmdInfo does not modify this
* field. */
Tcl_ObjCmdProc *objProc; /* Command's object-based procedure. */
ClientData objClientData; /* ClientData for object proc. */
Tcl_CmdProc *proc; /* Command's string-based procedure. */
ClientData clientData; /* ClientData for string proc. */
Tcl_CmdDeleteProc *deleteProc;
/* Procedure to call when command is
* deleted. */
ClientData deleteData; /* Value to pass to deleteProc (usually
* the same as clientData). */
Tcl_Namespace *namespacePtr; /* Points to the namespace that contains
* this command. Note that Tcl_SetCmdInfo
* will not change a command's namespace;
* use Tcl_RenameCommand to do that. */
} Tcl_CmdInfo;
/*
* The structure defined below is used to hold dynamic strings. The only
* field that clients should use is the string field, accessible via the
* macro Tcl_DStringValue.
*/
#ifndef Tcl_DString
#define TCL_DSTRING_STATIC_SIZE 200
#ifdef USE_TCL_STRUCT
typedef struct Tcl_DString {
char *string; /* Points to beginning of string: either
* staticSpace below or a malloced array. */
int length; /* Number of non-NULL characters in the
* string. */
int spaceAvl; /* Total number of bytes available for the
* string and its terminating NULL char. */
char staticSpace[TCL_DSTRING_STATIC_SIZE];
/* Space to use in common case where string
* is small. */
} Tcl_DString;
#else
typedef Tcl_Obj *Tcl_DString;
#endif
#endif
#ifdef USE_TCL_STRUCT
#define Tcl_DStringLength(dsPtr) ((dsPtr)->length)
#define Tcl_DStringValue(dsPtr) ((dsPtr)->string)
#endif
#define Tcl_DStringTrunc Tcl_DStringSetLength
/*
* Definitions for the maximum number of digits of precision that may
* be specified in the "tcl_precision" variable, and the number of
* bytes of buffer space required by Tcl_PrintDouble.
*/
#define TCL_MAX_PREC 17
#define TCL_DOUBLE_SPACE (TCL_MAX_PREC+10)
/*
* Definition for a number of bytes of buffer space sufficient to hold the
* string representation of an integer in base 10 (assuming the existence
* of 64-bit integers).
*/
#define TCL_INTEGER_SPACE 24
/*
* Flag that may be passed to Tcl_ConvertElement to force it not to
* output braces (careful! if you change this flag be sure to change
* the definitions at the front of tclUtil.c).
*/
#define TCL_DONT_USE_BRACES 1
/*
* Flag that may be passed to Tcl_GetIndexFromObj to force it to disallow
* abbreviated strings.
*/
#define TCL_EXACT 1
/*
* Flag values passed to Tcl_RecordAndEval and/or Tcl_EvalObj.
* WARNING: these bit choices must not conflict with the bit choices
* for evalFlag bits in tclInt.h!!
*/
#define TCL_NO_EVAL 0x10000
#define TCL_EVAL_GLOBAL 0x20000
#define TCL_EVAL_DIRECT 0x40000
#define TCL_EVAL_INVOKE 0x80000
/*
* Special freeProc values that may be passed to Tcl_SetResult (see
* the man page for details):
*/
#define TCL_VOLATILE ((Tcl_FreeProc *) 1)
#define TCL_STATIC ((Tcl_FreeProc *) 0)
#define TCL_DYNAMIC ((Tcl_FreeProc *) 3)
/*
* Flag values passed to variable-related procedures.
*/
#define TCL_GLOBAL_ONLY 1
#define TCL_NAMESPACE_ONLY 2
#define TCL_APPEND_VALUE 4
#define TCL_LIST_ELEMENT 8
#define TCL_TRACE_READS 0x10
#define TCL_TRACE_WRITES 0x20
#define TCL_TRACE_UNSETS 0x40
#define TCL_TRACE_DESTROYED 0x80
#define TCL_INTERP_DESTROYED 0x100
#define TCL_LEAVE_ERR_MSG 0x200
#define TCL_TRACE_ARRAY 0x800
#ifndef TCL_REMOVE_OBSOLETE_TRACES
/* Required to support old variable/vdelete/vinfo traces */
#define TCL_TRACE_OLD_STYLE 0x1000
#endif
/* Indicate the semantics of the result of a trace */
#define TCL_TRACE_RESULT_DYNAMIC 0x8000
#define TCL_TRACE_RESULT_OBJECT 0x10000
/*
* Flag values passed to command-related procedures.
*/
#define TCL_TRACE_RENAME 0x2000
#define TCL_TRACE_DELETE 0x4000
#define TCL_ALLOW_INLINE_COMPILATION 0x20000
/*
* Flag values passed to Tcl_CreateObjTrace, and used internally
* by command execution traces. Slots 4,8,16 and 32 are
* used internally by execution traces (see tclCmdMZ.c)
*/
#define TCL_TRACE_ENTER_EXEC 1
#define TCL_TRACE_LEAVE_EXEC 2
/*
* The TCL_PARSE_PART1 flag is deprecated and has no effect.
* The part1 is now always parsed whenever the part2 is NULL.
* (This is to avoid a common error when converting code to
* use the new object based APIs and forgetting to give the
* flag)
*/
#ifndef TCL_NO_DEPRECATED
# define TCL_PARSE_PART1 0x400
#endif
/*
* Types for linked variables:
*/
#define TCL_LINK_INT 1
#define TCL_LINK_DOUBLE 2
#define TCL_LINK_BOOLEAN 3
#define TCL_LINK_STRING 4
#define TCL_LINK_WIDE_INT 5
#define TCL_LINK_READ_ONLY 0x80
/*
* Forward declarations of Tcl_HashTable and related types.
*/
typedef struct Tcl_HashKeyType Tcl_HashKeyType;
typedef struct Tcl_HashTable Tcl_HashTable;
typedef struct Tcl_HashEntry Tcl_HashEntry;
typedef unsigned int (Tcl_HashKeyProc) _ANSI_ARGS_((Tcl_HashTable *tablePtr,
VOID *keyPtr));
typedef int (Tcl_CompareHashKeysProc) _ANSI_ARGS_((VOID *keyPtr,
Tcl_HashEntry *hPtr));
typedef Tcl_HashEntry *(Tcl_AllocHashEntryProc) _ANSI_ARGS_((
Tcl_HashTable *tablePtr, VOID *keyPtr));
typedef void (Tcl_FreeHashEntryProc) _ANSI_ARGS_((Tcl_HashEntry *hPtr));
/*
* This flag controls whether the hash table stores the hash of a key, or
* recalculates it. There should be no reason for turning this flag off
* as it is completely binary and source compatible unless you directly
* access the bucketPtr member of the Tcl_HashTableEntry structure. This
* member has been removed and the space used to store the hash value.
*/
#ifndef TCL_HASH_KEY_STORE_HASH
# define TCL_HASH_KEY_STORE_HASH 1
#endif
/*
* Structure definition for an entry in a hash table. No-one outside
* Tcl should access any of these fields directly; use the macros
* defined below.
*/
struct Tcl_HashEntry {
Tcl_HashEntry *nextPtr; /* Pointer to next entry in this
* hash bucket, or NULL for end of
* chain. */
Tcl_HashTable *tablePtr; /* Pointer to table containing entry. */
#if TCL_HASH_KEY_STORE_HASH
# if TCL_PRESERVE_BINARY_COMPATABILITY
VOID *hash; /* Hash value, stored as pointer to
* ensure that the offsets of the
* fields in this structure are not
* changed. */
# else
unsigned int hash; /* Hash value. */
# endif
#else
Tcl_HashEntry **bucketPtr; /* Pointer to bucket that points to
* first entry in this entry's chain:
* used for deleting the entry. */
#endif
ClientData clientData; /* Application stores something here
* with Tcl_SetHashValue. */
union { /* Key has one of these forms: */
char *oneWordValue; /* One-word value for key. */
Tcl_Obj *objPtr; /* Tcl_Obj * key value. */
int words[1]; /* Multiple integer words for key.
* The actual size will be as large
* as necessary for this table's
* keys. */
char string[4]; /* String for key. The actual size
* will be as large as needed to hold
* the key. */
} key; /* MUST BE LAST FIELD IN RECORD!! */
};
/*
* Flags used in Tcl_HashKeyType.
*
* TCL_HASH_KEY_RANDOMIZE_HASH:
* There are some things, pointers for example
* which don't hash well because they do not use
* the lower bits. If this flag is set then the
* hash table will attempt to rectify this by
* randomising the bits and then using the upper
* N bits as the index into the table.
*/
#define TCL_HASH_KEY_RANDOMIZE_HASH 0x1
/*
* Structure definition for the methods associated with a hash table
* key type.
*/
#define TCL_HASH_KEY_TYPE_VERSION 1
struct Tcl_HashKeyType {
int version; /* Version of the table. If this structure is
* extended in future then the version can be
* used to distinguish between different
* structures.
*/
int flags; /* Flags, see above for details. */
/* Calculates a hash value for the key. If this is NULL then the pointer
* itself is used as a hash value.
*/
Tcl_HashKeyProc *hashKeyProc;
/* Compares two keys and returns zero if they do not match, and non-zero
* if they do. If this is NULL then the pointers are compared.
*/
Tcl_CompareHashKeysProc *compareKeysProc;
/* Called to allocate memory for a new entry, i.e. if the key is a
* string then this could allocate a single block which contains enough
* space for both the entry and the string. Only the key field of the
* allocated Tcl_HashEntry structure needs to be filled in. If something
* else needs to be done to the key, i.e. incrementing a reference count
* then that should be done by this function. If this is NULL then Tcl_Alloc
* is used to allocate enough space for a Tcl_HashEntry and the key pointer
* is assigned to key.oneWordValue.
*/
Tcl_AllocHashEntryProc *allocEntryProc;
/* Called to free memory associated with an entry. If something else needs
* to be done to the key, i.e. decrementing a reference count then that
* should be done by this function. If this is NULL then Tcl_Free is used
* to free the Tcl_HashEntry.
*/
Tcl_FreeHashEntryProc *freeEntryProc;
};
/*
* Structure definition for a hash table. Must be in tcl.h so clients
* can allocate space for these structures, but clients should never
* access any fields in this structure.
*/
#define TCL_SMALL_HASH_TABLE 4
struct Tcl_HashTable {
Tcl_HashEntry **buckets; /* Pointer to bucket array. Each
* element points to first entry in
* bucket's hash chain, or NULL. */
Tcl_HashEntry *staticBuckets[TCL_SMALL_HASH_TABLE];
/* Bucket array used for small tables
* (to avoid mallocs and frees). */
int numBuckets; /* Total number of buckets allocated
* at **bucketPtr. */
int numEntries; /* Total number of entries present
* in table. */
int rebuildSize; /* Enlarge table when numEntries gets
* to be this large. */
int downShift; /* Shift count used in hashing
* function. Designed to use high-
* order bits of randomized keys. */
int mask; /* Mask value used in hashing
* function. */
int keyType; /* Type of keys used in this table.
* It's either TCL_CUSTOM_KEYS,
* TCL_STRING_KEYS, TCL_ONE_WORD_KEYS,
* or an integer giving the number of
* ints that is the size of the key.
*/
#if TCL_PRESERVE_BINARY_COMPATABILITY
Tcl_HashEntry *(*findProc) _ANSI_ARGS_((Tcl_HashTable *tablePtr,
CONST char *key));
Tcl_HashEntry *(*createProc) _ANSI_ARGS_((Tcl_HashTable *tablePtr,
CONST char *key, int *newPtr));
#endif
Tcl_HashKeyType *typePtr; /* Type of the keys used in the
* Tcl_HashTable. */
};
/*
* Structure definition for information used to keep track of searches
* through hash tables:
*/
typedef struct Tcl_HashSearch {
Tcl_HashTable *tablePtr; /* Table being searched. */
int nextIndex; /* Index of next bucket to be
* enumerated after present one. */
Tcl_HashEntry *nextEntryPtr; /* Next entry to be enumerated in the
* the current bucket. */
} Tcl_HashSearch;
/*
* Acceptable key types for hash tables:
*
* TCL_STRING_KEYS: The keys are strings, they are copied into
* the entry.
* TCL_ONE_WORD_KEYS: The keys are pointers, the pointer is stored
* in the entry.
* TCL_CUSTOM_TYPE_KEYS: The keys are arbitrary types which are copied
* into the entry.
* TCL_CUSTOM_PTR_KEYS: The keys are pointers to arbitrary types, the
* pointer is stored in the entry.
*
* While maintaining binary compatability the above have to be distinct
* values as they are used to differentiate between old versions of the
* hash table which don't have a typePtr and new ones which do. Once binary
* compatability is discarded in favour of making more wide spread changes
* TCL_STRING_KEYS can be the same as TCL_CUSTOM_TYPE_KEYS, and
* TCL_ONE_WORD_KEYS can be the same as TCL_CUSTOM_PTR_KEYS because they
* simply determine how the key is accessed from the entry and not the
* behaviour.
*/
#define TCL_STRING_KEYS 0
#define TCL_ONE_WORD_KEYS 1
#if TCL_PRESERVE_BINARY_COMPATABILITY
# define TCL_CUSTOM_TYPE_KEYS -2
# define TCL_CUSTOM_PTR_KEYS -1
#else
# define TCL_CUSTOM_TYPE_KEYS TCL_STRING_KEYS
# define TCL_CUSTOM_PTR_KEYS TCL_ONE_WORD_KEYS
#endif
/*
* Macros for clients to use to access fields of hash entries:
*/
#define Tcl_GetHashValue(h) ((h)->clientData)
#define Tcl_SetHashValue(h, value) ((h)->clientData = (ClientData) (value))
#if TCL_PRESERVE_BINARY_COMPATABILITY
# define Tcl_GetHashKey(tablePtr, h) \
((char *) (((tablePtr)->keyType == TCL_ONE_WORD_KEYS || \
(tablePtr)->keyType == TCL_CUSTOM_PTR_KEYS) \
? (h)->key.oneWordValue \
: (h)->key.string))
#else
# define Tcl_GetHashKey(tablePtr, h) \
((char *) (((tablePtr)->keyType == TCL_ONE_WORD_KEYS) \
? (h)->key.oneWordValue \
: (h)->key.string))
#endif
/*
* Macros to use for clients to use to invoke find and create procedures
* for hash tables:
*/
#if TCL_PRESERVE_BINARY_COMPATABILITY
# define Tcl_FindHashEntry(tablePtr, key) \
(*((tablePtr)->findProc))(tablePtr, key)
# define Tcl_CreateHashEntry(tablePtr, key, newPtr) \
(*((tablePtr)->createProc))(tablePtr, key, newPtr)
#else /* !TCL_PRESERVE_BINARY_COMPATABILITY */
/*
* Macro to use new extended version of Tcl_InitHashTable.
*/
# define Tcl_InitHashTable(tablePtr, keyType) \
Tcl_InitHashTableEx(tablePtr, keyType, NULL)
#endif /* TCL_PRESERVE_BINARY_COMPATABILITY */
/*
* Flag values to pass to Tcl_DoOneEvent to disable searches
* for some kinds of events:
*/
#define TCL_DONT_WAIT (1<<1)
#define TCL_WINDOW_EVENTS (1<<2)
#define TCL_FILE_EVENTS (1<<3)
#define TCL_TIMER_EVENTS (1<<4)
#define TCL_IDLE_EVENTS (1<<5) /* WAS 0x10 ???? */
#define TCL_ALL_EVENTS (~TCL_DONT_WAIT)
/*
* The following structure defines a generic event for the Tcl event
* system. These are the things that are queued in calls to Tcl_QueueEvent
* and serviced later by Tcl_DoOneEvent. There can be many different
* kinds of events with different fields, corresponding to window events,
* timer events, etc. The structure for a particular event consists of
* a Tcl_Event header followed by additional information specific to that
* event.
*/
struct Tcl_Event {
Tcl_EventProc *proc; /* Procedure to call to service this event. */
struct Tcl_Event *nextPtr; /* Next in list of pending events, or NULL. */
};
/*
* Positions to pass to Tcl_QueueEvent:
*/
typedef enum {
TCL_QUEUE_TAIL, TCL_QUEUE_HEAD, TCL_QUEUE_MARK
} Tcl_QueuePosition;
/*
* Values to pass to Tcl_SetServiceMode to specify the behavior of notifier
* event routines.
*/
#define TCL_SERVICE_NONE 0
#define TCL_SERVICE_ALL 1
/*
* The following structure keeps is used to hold a time value, either as
* an absolute time (the number of seconds from the epoch) or as an
* elapsed time. On Unix systems the epoch is Midnight Jan 1, 1970 GMT.
* On Macintosh systems the epoch is Midnight Jan 1, 1904 GMT.
*/
typedef struct Tcl_Time {
long sec; /* Seconds. */
long usec; /* Microseconds. */
} Tcl_Time;
typedef void (Tcl_SetTimerProc) _ANSI_ARGS_((Tcl_Time *timePtr));
typedef int (Tcl_WaitForEventProc) _ANSI_ARGS_((Tcl_Time *timePtr));
/*
* Bits to pass to Tcl_CreateFileHandler and Tcl_CreateChannelHandler
* to indicate what sorts of events are of interest:
*/
#define TCL_READABLE (1<<1)
#define TCL_WRITABLE (1<<2)
#define TCL_EXCEPTION (1<<3)
/*
* Flag values to pass to Tcl_OpenCommandChannel to indicate the
* disposition of the stdio handles. TCL_STDIN, TCL_STDOUT, TCL_STDERR,
* are also used in Tcl_GetStdChannel.
*/
#define TCL_STDIN (1<<1)
#define TCL_STDOUT (1<<2)
#define TCL_STDERR (1<<3)
#define TCL_ENFORCE_MODE (1<<4)
/*
* Bits passed to Tcl_DriverClose2Proc to indicate which side of a channel
* should be closed.
*/
#define TCL_CLOSE_READ (1<<1)
#define TCL_CLOSE_WRITE (1<<2)
/*
* Value to use as the closeProc for a channel that supports the
* close2Proc interface.
*/
#define TCL_CLOSE2PROC ((Tcl_DriverCloseProc *)1)
/*
* Channel version tag. This was introduced in 8.3.2/8.4.
*/
#define TCL_CHANNEL_VERSION_1 ((Tcl_ChannelTypeVersion) 0x1)
#define TCL_CHANNEL_VERSION_2 ((Tcl_ChannelTypeVersion) 0x2)
#define TCL_CHANNEL_VERSION_3 ((Tcl_ChannelTypeVersion) 0x3)
/*
* Typedefs for the various operations in a channel type:
*/
typedef int (Tcl_DriverBlockModeProc) _ANSI_ARGS_((
ClientData instanceData, int mode));
typedef int (Tcl_DriverCloseProc) _ANSI_ARGS_((ClientData instanceData,
Tcl_Interp *interp));
typedef int (Tcl_DriverClose2Proc) _ANSI_ARGS_((ClientData instanceData,
Tcl_Interp *interp, int flags));
typedef int (Tcl_DriverInputProc) _ANSI_ARGS_((ClientData instanceData,
char *buf, int toRead, int *errorCodePtr));
typedef int (Tcl_DriverOutputProc) _ANSI_ARGS_((ClientData instanceData,
CONST84 char *buf, int toWrite, int *errorCodePtr));
typedef int (Tcl_DriverSeekProc) _ANSI_ARGS_((ClientData instanceData,
long offset, int mode, int *errorCodePtr));
typedef int (Tcl_DriverSetOptionProc) _ANSI_ARGS_((
ClientData instanceData, Tcl_Interp *interp,
CONST char *optionName, CONST char *value));
typedef int (Tcl_DriverGetOptionProc) _ANSI_ARGS_((
ClientData instanceData, Tcl_Interp *interp,
CONST84 char *optionName, Tcl_DString *dsPtr));
typedef void (Tcl_DriverWatchProc) _ANSI_ARGS_((
ClientData instanceData, int mask));
typedef int (Tcl_DriverGetHandleProc) _ANSI_ARGS_((
ClientData instanceData, int direction,
ClientData *handlePtr));
typedef int (Tcl_DriverFlushProc) _ANSI_ARGS_((
ClientData instanceData));
typedef int (Tcl_DriverHandlerProc) _ANSI_ARGS_((
ClientData instanceData, int interestMask));
typedef Tcl_WideInt (Tcl_DriverWideSeekProc) _ANSI_ARGS_((
ClientData instanceData, Tcl_WideInt offset,
int mode, int *errorCodePtr));
/*
* The following declarations either map ckalloc and ckfree to
* malloc and free, or they map them to procedures with all sorts
* of debugging hooks defined in tclCkalloc.c.
*/
#ifdef TCL_MEM_DEBUG
# define ckalloc(x) Tcl_DbCkalloc(x, __FILE__, __LINE__)
# define ckfree(x) Tcl_DbCkfree(x, __FILE__, __LINE__)
# define ckrealloc(x,y) Tcl_DbCkrealloc((x), (y),__FILE__, __LINE__)
# define attemptckalloc(x) Tcl_AttemptDbCkalloc(x, __FILE__, __LINE__)
# define attemptckrealloc(x,y) Tcl_AttemptDbCkrealloc((x), (y), __FILE__, __LINE__)
#else /* !TCL_MEM_DEBUG */
/*
* If we are not using the debugging allocator, we should call the
* Tcl_Alloc, et al. routines in order to guarantee that every module
* is using the same memory allocator both inside and outside of the
* Tcl library.
*/
# define ckalloc(x) Tcl_Alloc(x)
# define ckfree(x) Tcl_Free(x)
# define ckrealloc(x,y) Tcl_Realloc(x,y)
# define attemptckalloc(x) Tcl_AttemptAlloc(x)
# define attemptckrealloc(x,y) Tcl_AttemptRealloc(x,y)
# define Tcl_InitMemory(x)
# define Tcl_DumpActiveMemory(x)
# define Tcl_ValidateAllMemory(x,y)
#endif /* !TCL_MEM_DEBUG */
/*
* struct Tcl_ChannelType:
*
* One such structure exists for each type (kind) of channel.
* It collects together in one place all the functions that are
* part of the specific channel type.
*
* It is recommend that the Tcl_Channel* functions are used to access
* elements of this structure, instead of direct accessing.
*/
typedef struct Tcl_ChannelType
#ifdef USE_TCL_STRUCT
{
char *typeName; /* The name of the channel type in Tcl
* commands. This storage is owned by
* channel type. */
Tcl_ChannelTypeVersion version; /* Version of the channel type. */
Tcl_DriverCloseProc *closeProc; /* Procedure to call to close the
* channel, or TCL_CLOSE2PROC if the
* close2Proc should be used
* instead. */
Tcl_DriverInputProc *inputProc; /* Procedure to call for input
* on channel. */
Tcl_DriverOutputProc *outputProc; /* Procedure to call for output
* on channel. */
Tcl_DriverSeekProc *seekProc; /* Procedure to call to seek
* on the channel. May be NULL. */
Tcl_DriverSetOptionProc *setOptionProc;
/* Set an option on a channel. */
Tcl_DriverGetOptionProc *getOptionProc;
/* Get an option from a channel. */
Tcl_DriverWatchProc *watchProc; /* Set up the notifier to watch
* for events on this channel. */
Tcl_DriverGetHandleProc *getHandleProc;
/* Get an OS handle from the channel
* or NULL if not supported. */
Tcl_DriverClose2Proc *close2Proc; /* Procedure to call to close the
* channel if the device supports
* closing the read & write sides
* independently. */
Tcl_DriverBlockModeProc *blockModeProc;
/* Set blocking mode for the
* raw channel. May be NULL. */
/*
* Only valid in TCL_CHANNEL_VERSION_2 channels or later
*/
Tcl_DriverFlushProc *flushProc; /* Procedure to call to flush a
* channel. May be NULL. */
Tcl_DriverHandlerProc *handlerProc; /* Procedure to call to handle a
* channel event. This will be passed
* up the stacked channel chain. */
/*
* Only valid in TCL_CHANNEL_VERSION_3 channels or later
*/
Tcl_DriverWideSeekProc *wideSeekProc;
/* Procedure to call to seek
* on the channel which can
* handle 64-bit offsets. May be
* NULL, and must be NULL if
* seekProc is NULL. */
}
#endif
Tcl_ChannelType;
/*
* The following flags determine whether the blockModeProc above should
* set the channel into blocking or nonblocking mode. They are passed
* as arguments to the blockModeProc procedure in the above structure.
*/
#define TCL_MODE_BLOCKING 0 /* Put channel into blocking mode. */
#define TCL_MODE_NONBLOCKING 1 /* Put channel into nonblocking
* mode. */
/*
* Enum for different types of file paths.
*/
typedef enum Tcl_PathType {
TCL_PATH_ABSOLUTE,
TCL_PATH_RELATIVE,
TCL_PATH_VOLUME_RELATIVE
} Tcl_PathType;
/*
* The following structure is used to pass glob type data amongst
* the various glob routines and Tcl_FSMatchInDirectory.
*/
typedef struct Tcl_GlobTypeData {
/* Corresponds to bcdpfls as in 'find -t' */
int type;
/* Corresponds to file permissions */
int perm;
/* Acceptable mac type */
Tcl_Obj* macType;
/* Acceptable mac creator */
Tcl_Obj* macCreator;
} Tcl_GlobTypeData;
/*
* type and permission definitions for glob command
*/
#define TCL_GLOB_TYPE_BLOCK (1<<0)
#define TCL_GLOB_TYPE_CHAR (1<<1)
#define TCL_GLOB_TYPE_DIR (1<<2)
#define TCL_GLOB_TYPE_PIPE (1<<3)
#define TCL_GLOB_TYPE_FILE (1<<4)
#define TCL_GLOB_TYPE_LINK (1<<5)
#define TCL_GLOB_TYPE_SOCK (1<<6)
#define TCL_GLOB_TYPE_MOUNT (1<<7)
#define TCL_GLOB_PERM_RONLY (1<<0)
#define TCL_GLOB_PERM_HIDDEN (1<<1)
#define TCL_GLOB_PERM_R (1<<2)
#define TCL_GLOB_PERM_W (1<<3)
#define TCL_GLOB_PERM_X (1<<4)
/*
* Typedefs for the various filesystem operations:
*/
typedef int (Tcl_FSStatProc) _ANSI_ARGS_((Tcl_Obj *pathPtr, Tcl_StatBuf *buf));
typedef int (Tcl_FSAccessProc) _ANSI_ARGS_((Tcl_Obj *pathPtr, int mode));
typedef Tcl_Channel (Tcl_FSOpenFileChannelProc)
_ANSI_ARGS_((Tcl_Interp *interp, Tcl_Obj *pathPtr,
int mode, int permissions));
typedef int (Tcl_FSMatchInDirectoryProc) _ANSI_ARGS_((Tcl_Interp* interp,
Tcl_Obj *result, Tcl_Obj *pathPtr, CONST char *pattern,
Tcl_GlobTypeData * types));
typedef Tcl_Obj* (Tcl_FSGetCwdProc) _ANSI_ARGS_((Tcl_Interp *interp));
typedef int (Tcl_FSChdirProc) _ANSI_ARGS_((Tcl_Obj *pathPtr));
typedef int (Tcl_FSLstatProc) _ANSI_ARGS_((Tcl_Obj *pathPtr,
Tcl_StatBuf *buf));
typedef int (Tcl_FSCreateDirectoryProc) _ANSI_ARGS_((Tcl_Obj *pathPtr));
typedef int (Tcl_FSDeleteFileProc) _ANSI_ARGS_((Tcl_Obj *pathPtr));
typedef int (Tcl_FSCopyDirectoryProc) _ANSI_ARGS_((Tcl_Obj *srcPathPtr,
Tcl_Obj *destPathPtr, Tcl_Obj **errorPtr));
typedef int (Tcl_FSCopyFileProc) _ANSI_ARGS_((Tcl_Obj *srcPathPtr,
Tcl_Obj *destPathPtr));
typedef int (Tcl_FSRemoveDirectoryProc) _ANSI_ARGS_((Tcl_Obj *pathPtr,
int recursive, Tcl_Obj **errorPtr));
typedef int (Tcl_FSRenameFileProc) _ANSI_ARGS_((Tcl_Obj *srcPathPtr,
Tcl_Obj *destPathPtr));
typedef void (Tcl_FSUnloadFileProc) _ANSI_ARGS_((Tcl_LoadHandle loadHandle));
typedef Tcl_Obj* (Tcl_FSListVolumesProc) _ANSI_ARGS_((void));
/* We have to declare the utime structure here. */
struct utimbuf;
typedef int (Tcl_FSUtimeProc) _ANSI_ARGS_((Tcl_Obj *pathPtr,
struct utimbuf *tval));
typedef int (Tcl_FSNormalizePathProc) _ANSI_ARGS_((Tcl_Interp *interp,
Tcl_Obj *pathPtr, int nextCheckpoint));
typedef int (Tcl_FSFileAttrsGetProc) _ANSI_ARGS_((Tcl_Interp *interp,
int index, Tcl_Obj *pathPtr,
Tcl_Obj **objPtrRef));
typedef CONST char** (Tcl_FSFileAttrStringsProc) _ANSI_ARGS_((Tcl_Obj *pathPtr,
Tcl_Obj** objPtrRef));
typedef int (Tcl_FSFileAttrsSetProc) _ANSI_ARGS_((Tcl_Interp *interp,
int index, Tcl_Obj *pathPtr,
Tcl_Obj *objPtr));
typedef Tcl_Obj* (Tcl_FSLinkProc) _ANSI_ARGS_((Tcl_Obj *pathPtr,
Tcl_Obj *toPtr, int linkType));
typedef int (Tcl_FSLoadFileProc) _ANSI_ARGS_((Tcl_Interp * interp,
Tcl_Obj *pathPtr,
Tcl_LoadHandle *handlePtr,
Tcl_FSUnloadFileProc **unloadProcPtr));
typedef int (Tcl_FSPathInFilesystemProc) _ANSI_ARGS_((Tcl_Obj *pathPtr,
ClientData *clientDataPtr));
typedef Tcl_Obj* (Tcl_FSFilesystemPathTypeProc)
_ANSI_ARGS_((Tcl_Obj *pathPtr));
typedef Tcl_Obj* (Tcl_FSFilesystemSeparatorProc)
_ANSI_ARGS_((Tcl_Obj *pathPtr));
typedef void (Tcl_FSFreeInternalRepProc) _ANSI_ARGS_((ClientData clientData));
typedef ClientData (Tcl_FSDupInternalRepProc)
_ANSI_ARGS_((ClientData clientData));
typedef Tcl_Obj* (Tcl_FSInternalToNormalizedProc)
_ANSI_ARGS_((ClientData clientData));
typedef ClientData (Tcl_FSCreateInternalRepProc) _ANSI_ARGS_((Tcl_Obj *pathPtr));
typedef struct Tcl_FSVersion_ *Tcl_FSVersion;
/*
*----------------------------------------------------------------
* Data structures related to hooking into the filesystem
*----------------------------------------------------------------
*/
/*
* Filesystem version tag. This was introduced in 8.4.
*/
#define TCL_FILESYSTEM_VERSION_1 ((Tcl_FSVersion) 0x1)
/*
* struct Tcl_Filesystem:
*
* One such structure exists for each type (kind) of filesystem.
* It collects together in one place all the functions that are
* part of the specific filesystem. Tcl always accesses the
* filesystem through one of these structures.
*
* Not all entries need be non-NULL; any which are NULL are simply
* ignored. However, a complete filesystem should provide all of
* these functions. The explanations in the structure show
* the importance of each function.
*/
typedef struct Tcl_Filesystem {
CONST char *typeName; /* The name of the filesystem. */
int structureLength; /* Length of this structure, so future
* binary compatibility can be assured. */
Tcl_FSVersion version;
/* Version of the filesystem type. */
Tcl_FSPathInFilesystemProc *pathInFilesystemProc;
/* Function to check whether a path is in
* this filesystem. This is the most
* important filesystem procedure. */
Tcl_FSDupInternalRepProc *dupInternalRepProc;
/* Function to duplicate internal fs rep. May
* be NULL (but then fs is less efficient). */
Tcl_FSFreeInternalRepProc *freeInternalRepProc;
/* Function to free internal fs rep. Must
* be implemented, if internal representations
* need freeing, otherwise it can be NULL. */
Tcl_FSInternalToNormalizedProc *internalToNormalizedProc;
/* Function to convert internal representation
* to a normalized path. Only required if
* the fs creates pure path objects with no
* string/path representation. */
Tcl_FSCreateInternalRepProc *createInternalRepProc;
/* Function to create a filesystem-specific
* internal representation. May be NULL
* if paths have no internal representation,
* or if the Tcl_FSPathInFilesystemProc
* for this filesystem always immediately
* creates an internal representation for
* paths it accepts. */
Tcl_FSNormalizePathProc *normalizePathProc;
/* Function to normalize a path. Should
* be implemented for all filesystems
* which can have multiple string
* representations for the same path
* object. */
Tcl_FSFilesystemPathTypeProc *filesystemPathTypeProc;
/* Function to determine the type of a
* path in this filesystem. May be NULL. */
Tcl_FSFilesystemSeparatorProc *filesystemSeparatorProc;
/* Function to return the separator
* character(s) for this filesystem. Must
* be implemented. */
Tcl_FSStatProc *statProc;
/*
* Function to process a 'Tcl_FSStat()'
* call. Must be implemented for any
* reasonable filesystem.
*/
Tcl_FSAccessProc *accessProc;
/*
* Function to process a 'Tcl_FSAccess()'
* call. Must be implemented for any
* reasonable filesystem.
*/
Tcl_FSOpenFileChannelProc *openFileChannelProc;
/*
* Function to process a
* 'Tcl_FSOpenFileChannel()' call. Must be
* implemented for any reasonable
* filesystem.
*/
Tcl_FSMatchInDirectoryProc *matchInDirectoryProc;
/* Function to process a
* 'Tcl_FSMatchInDirectory()'. If not
* implemented, then glob and recursive
* copy functionality will be lacking in
* the filesystem. */
Tcl_FSUtimeProc *utimeProc;
/* Function to process a
* 'Tcl_FSUtime()' call. Required to
* allow setting (not reading) of times
* with 'file mtime', 'file atime' and
* the open-r/open-w/fcopy implementation
* of 'file copy'. */
Tcl_FSLinkProc *linkProc;
/* Function to process a
* 'Tcl_FSLink()' call. Should be
* implemented only if the filesystem supports
* links (reading or creating). */
Tcl_FSListVolumesProc *listVolumesProc;
/* Function to list any filesystem volumes
* added by this filesystem. Should be
* implemented only if the filesystem adds
* volumes at the head of the filesystem. */
Tcl_FSFileAttrStringsProc *fileAttrStringsProc;
/* Function to list all attributes strings
* which are valid for this filesystem.
* If not implemented the filesystem will
* not support the 'file attributes' command.
* This allows arbitrary additional information
* to be attached to files in the filesystem. */
Tcl_FSFileAttrsGetProc *fileAttrsGetProc;
/* Function to process a
* 'Tcl_FSFileAttrsGet()' call, used by
* 'file attributes'. */
Tcl_FSFileAttrsSetProc *fileAttrsSetProc;
/* Function to process a
* 'Tcl_FSFileAttrsSet()' call, used by
* 'file attributes'. */
Tcl_FSCreateDirectoryProc *createDirectoryProc;
/* Function to process a
* 'Tcl_FSCreateDirectory()' call. Should
* be implemented unless the FS is
* read-only. */
Tcl_FSRemoveDirectoryProc *removeDirectoryProc;
/* Function to process a
* 'Tcl_FSRemoveDirectory()' call. Should
* be implemented unless the FS is
* read-only. */
Tcl_FSDeleteFileProc *deleteFileProc;
/* Function to process a
* 'Tcl_FSDeleteFile()' call. Should
* be implemented unless the FS is
* read-only. */
Tcl_FSCopyFileProc *copyFileProc;
/* Function to process a
* 'Tcl_FSCopyFile()' call. If not
* implemented Tcl will fall back
* on open-r, open-w and fcopy as
* a copying mechanism, for copying
* actions initiated in Tcl (not C). */
Tcl_FSRenameFileProc *renameFileProc;
/* Function to process a
* 'Tcl_FSRenameFile()' call. If not
* implemented, Tcl will fall back on
* a copy and delete mechanism, for
* rename actions initiated in Tcl (not C). */
Tcl_FSCopyDirectoryProc *copyDirectoryProc;
/* Function to process a
* 'Tcl_FSCopyDirectory()' call. If
* not implemented, Tcl will fall back
* on a recursive create-dir, file copy
* mechanism, for copying actions
* initiated in Tcl (not C). */
Tcl_FSLstatProc *lstatProc;
/* Function to process a
* 'Tcl_FSLstat()' call. If not implemented,
* Tcl will attempt to use the 'statProc'
* defined above instead. */
Tcl_FSLoadFileProc *loadFileProc;
/* Function to process a
* 'Tcl_FSLoadFile()' call. If not
* implemented, Tcl will fall back on
* a copy to native-temp followed by a
* Tcl_FSLoadFile on that temporary copy. */
Tcl_FSGetCwdProc *getCwdProc;
/*
* Function to process a 'Tcl_FSGetCwd()'
* call. Most filesystems need not
* implement this. It will usually only be
* called once, if 'getcwd' is called
* before 'chdir'. May be NULL.
*/
Tcl_FSChdirProc *chdirProc;
/*
* Function to process a 'Tcl_FSChdir()'
* call. If filesystems do not implement
* this, it will be emulated by a series of
* directory access checks. Otherwise,
* virtual filesystems which do implement
* it need only respond with a positive
* return result if the dirName is a valid
* directory in their filesystem. They
* need not remember the result, since that
* will be automatically remembered for use
* by GetCwd. Real filesystems should
* carry out the correct action (i.e. call
* the correct system 'chdir' api). If not
* implemented, then 'cd' and 'pwd' will
* fail inside the filesystem.
*/
} Tcl_Filesystem;
/*
* The following definitions are used as values for the 'linkAction' flag
* to Tcl_FSLink, or the linkProc of any filesystem. Any combination
* of flags can be given. For link creation, the linkProc should create
* a link which matches any of the types given.
*
* TCL_CREATE_SYMBOLIC_LINK: Create a symbolic or soft link.
* TCL_CREATE_HARD_LINK: Create a hard link.
*/
#define TCL_CREATE_SYMBOLIC_LINK 0x01
#define TCL_CREATE_HARD_LINK 0x02
/*
* The following structure represents the Notifier functions that
* you can override with the Tcl_SetNotifier call.
*/
typedef struct Tcl_NotifierProcs {
Tcl_SetTimerProc *setTimerProc;
Tcl_WaitForEventProc *waitForEventProc;
Tcl_CreateFileHandlerProc *createFileHandlerProc;
Tcl_DeleteFileHandlerProc *deleteFileHandlerProc;
Tcl_InitNotifierProc *initNotifierProc;
Tcl_FinalizeNotifierProc *finalizeNotifierProc;
Tcl_AlertNotifierProc *alertNotifierProc;
Tcl_ServiceModeHookProc *serviceModeHookProc;
} Tcl_NotifierProcs;
/*
* The following structure represents a user-defined encoding. It collects
* together all the functions that are used by the specific encoding.
*/
typedef struct Tcl_EncodingType
#ifdef USE_TCL_STRUCT
{
CONST char *encodingName; /* The name of the encoding, e.g. "euc-jp".
* This name is the unique key for this
* encoding type. */
Tcl_EncodingConvertProc *toUtfProc;
/* Procedure to convert from external
* encoding into UTF-8. */
Tcl_EncodingConvertProc *fromUtfProc;
/* Procedure to convert from UTF-8 into
* external encoding. */
Tcl_EncodingFreeProc *freeProc;
/* If non-NULL, procedure to call when this
* encoding is deleted. */
ClientData clientData; /* Arbitrary value associated with encoding
* type. Passed to conversion procedures. */
int nullSize; /* Number of zero bytes that signify
* end-of-string in this encoding. This
* number is used to determine the source
* string length when the srcLen argument is
* negative. Must be 1 or 2. */
}
#endif
Tcl_EncodingType;
/*
* The following definitions are used as values for the conversion control
* flags argument when converting text from one character set to another:
*
* TCL_ENCODING_START: Signifies that the source buffer is the first
* block in a (potentially multi-block) input
* stream. Tells the conversion procedure to
* reset to an initial state and perform any
* initialization that needs to occur before the
* first byte is converted. If the source
* buffer contains the entire input stream to be
* converted, this flag should be set.
*
* TCL_ENCODING_END: Signifies that the source buffer is the last
* block in a (potentially multi-block) input
* stream. Tells the conversion routine to
* perform any finalization that needs to occur
* after the last byte is converted and then to
* reset to an initial state. If the source
* buffer contains the entire input stream to be
* converted, this flag should be set.
*
* TCL_ENCODING_STOPONERROR: If set, then the converter will return
* immediately upon encountering an invalid
* byte sequence or a source character that has
* no mapping in the target encoding. If clear,
* then the converter will skip the problem,
* substituting one or more "close" characters
* in the destination buffer and then continue
* to sonvert the source.
*/
#define TCL_ENCODING_START 0x01
#define TCL_ENCODING_END 0x02
#define TCL_ENCODING_STOPONERROR 0x04
/*
* The following data structures and declarations are for the new Tcl
* parser.
*/
/*
* For each word of a command, and for each piece of a word such as a
* variable reference, one of the following structures is created to
* describe the token.
*/
typedef struct Tcl_Token
#ifdef USE_TCL_STRUCT
{
int type; /* Type of token, such as TCL_TOKEN_WORD;
* see below for valid types. */
CONST char *start; /* First character in token. */
int size; /* Number of bytes in token. */
int numComponents; /* If this token is composed of other
* tokens, this field tells how many of
* them there are (including components of
* components, etc.). The component tokens
* immediately follow this one. */
}
#endif
Tcl_Token;
/*
* Type values defined for Tcl_Token structures. These values are
* defined as mask bits so that it's easy to check for collections of
* types.
*
* TCL_TOKEN_WORD - The token describes one word of a command,
* from the first non-blank character of
* the word (which may be " or {) up to but
* not including the space, semicolon, or
* bracket that terminates the word.
* NumComponents counts the total number of
* sub-tokens that make up the word. This
* includes, for example, sub-tokens of
* TCL_TOKEN_VARIABLE tokens.
* TCL_TOKEN_SIMPLE_WORD - This token is just like TCL_TOKEN_WORD
* except that the word is guaranteed to
* consist of a single TCL_TOKEN_TEXT
* sub-token.
* TCL_TOKEN_TEXT - The token describes a range of literal
* text that is part of a word.
* NumComponents is always 0.
* TCL_TOKEN_BS - The token describes a backslash sequence
* that must be collapsed. NumComponents
* is always 0.
* TCL_TOKEN_COMMAND - The token describes a command whose result
* must be substituted into the word. The
* token includes the enclosing brackets.
* NumComponents is always 0.
* TCL_TOKEN_VARIABLE - The token describes a variable
* substitution, including the dollar sign,
* variable name, and array index (if there
* is one) up through the right
* parentheses. NumComponents tells how
* many additional tokens follow to
* represent the variable name. The first
* token will be a TCL_TOKEN_TEXT token
* that describes the variable name. If
* the variable is an array reference then
* there will be one or more additional
* tokens, of type TCL_TOKEN_TEXT,
* TCL_TOKEN_BS, TCL_TOKEN_COMMAND, and
* TCL_TOKEN_VARIABLE, that describe the
* array index; numComponents counts the
* total number of nested tokens that make
* up the variable reference, including
* sub-tokens of TCL_TOKEN_VARIABLE tokens.
* TCL_TOKEN_SUB_EXPR - The token describes one subexpression of a
* expression, from the first non-blank
* character of the subexpression up to but not
* including the space, brace, or bracket
* that terminates the subexpression.
* NumComponents counts the total number of
* following subtokens that make up the
* subexpression; this includes all subtokens
* for any nested TCL_TOKEN_SUB_EXPR tokens.
* For example, a numeric value used as a
* primitive operand is described by a
* TCL_TOKEN_SUB_EXPR token followed by a
* TCL_TOKEN_TEXT token. A binary subexpression
* is described by a TCL_TOKEN_SUB_EXPR token
* followed by the TCL_TOKEN_OPERATOR token
* for the operator, then TCL_TOKEN_SUB_EXPR
* tokens for the left then the right operands.
* TCL_TOKEN_OPERATOR - The token describes one expression operator.
* An operator might be the name of a math
* function such as "abs". A TCL_TOKEN_OPERATOR
* token is always preceeded by one
* TCL_TOKEN_SUB_EXPR token for the operator's
* subexpression, and is followed by zero or
* more TCL_TOKEN_SUB_EXPR tokens for the
* operator's operands. NumComponents is
* always 0.
*/
#define TCL_TOKEN_WORD 1
#define TCL_TOKEN_SIMPLE_WORD 2
#define TCL_TOKEN_TEXT 4
#define TCL_TOKEN_BS 8
#define TCL_TOKEN_COMMAND 16
#define TCL_TOKEN_VARIABLE 32
#define TCL_TOKEN_SUB_EXPR 64
#define TCL_TOKEN_OPERATOR 128
/*
* Parsing error types. On any parsing error, one of these values
* will be stored in the error field of the Tcl_Parse structure
* defined below.
*/
#define TCL_PARSE_SUCCESS 0
#define TCL_PARSE_QUOTE_EXTRA 1
#define TCL_PARSE_BRACE_EXTRA 2
#define TCL_PARSE_MISSING_BRACE 3
#define TCL_PARSE_MISSING_BRACKET 4
#define TCL_PARSE_MISSING_PAREN 5
#define TCL_PARSE_MISSING_QUOTE 6
#define TCL_PARSE_MISSING_VAR_BRACE 7
#define TCL_PARSE_SYNTAX 8
#define TCL_PARSE_BAD_NUMBER 9
/*
* A structure of the following type is filled in by Tcl_ParseCommand.
* It describes a single command parsed from an input string.
*/
#define NUM_STATIC_TOKENS 20
typedef struct Tcl_Parse
#ifdef USE_TCL_STRUCT
{
CONST char *commentStart; /* Pointer to # that begins the first of
* one or more comments preceding the
* command. */
int commentSize; /* Number of bytes in comments (up through
* newline character that terminates the
* last comment). If there were no
* comments, this field is 0. */
CONST char *commandStart; /* First character in first word of command. */
int commandSize; /* Number of bytes in command, including
* first character of first word, up
* through the terminating newline,
* close bracket, or semicolon. */
int numWords; /* Total number of words in command. May
* be 0. */
Tcl_Token *tokenPtr; /* Pointer to first token representing
* the words of the command. Initially
* points to staticTokens, but may change
* to point to malloc-ed space if command
* exceeds space in staticTokens. */
int numTokens; /* Total number of tokens in command. */
int tokensAvailable; /* Total number of tokens available at
* *tokenPtr. */
int errorType; /* One of the parsing error types defined
* above. */
/*
* The fields below are intended only for the private use of the
* parser. They should not be used by procedures that invoke
* Tcl_ParseCommand.
*/
CONST char *string; /* The original command string passed to
* Tcl_ParseCommand. */
CONST char *end; /* Points to the character just after the
* last one in the command string. */
Tcl_Interp *interp; /* Interpreter to use for error reporting,
* or NULL. */
CONST char *term; /* Points to character in string that
* terminated most recent token. Filled in
* by ParseTokens. If an error occurs,
* points to beginning of region where the
* error occurred (e.g. the open brace if
* the close brace is missing). */
int incomplete; /* This field is set to 1 by Tcl_ParseCommand
* if the command appears to be incomplete.
* This information is used by
* Tcl_CommandComplete. */
Tcl_Token staticTokens[NUM_STATIC_TOKENS];
/* Initial space for tokens for command.
* This space should be large enough to
* accommodate most commands; dynamic
* space is allocated for very large
* commands that don't fit here. */
}
#endif
Tcl_Parse;
/*
* The following definitions are the error codes returned by the conversion
* routines:
*
* TCL_OK: All characters were converted.
*
* TCL_CONVERT_NOSPACE: The output buffer would not have been large
* enough for all of the converted data; as many
* characters as could fit were converted though.
*
* TCL_CONVERT_MULTIBYTE: The last few bytes in the source string were
* the beginning of a multibyte sequence, but
* more bytes were needed to complete this
* sequence. A subsequent call to the conversion
* routine should pass the beginning of this
* unconverted sequence plus additional bytes
* from the source stream to properly convert
* the formerly split-up multibyte sequence.
*
* TCL_CONVERT_SYNTAX: The source stream contained an invalid
* character sequence. This may occur if the
* input stream has been damaged or if the input
* encoding method was misidentified. This error
* is reported only if TCL_ENCODING_STOPONERROR
* was specified.
*
* TCL_CONVERT_UNKNOWN: The source string contained a character
* that could not be represented in the target
* encoding. This error is reported only if
* TCL_ENCODING_STOPONERROR was specified.
*/
#define TCL_CONVERT_MULTIBYTE -1
#define TCL_CONVERT_SYNTAX -2
#define TCL_CONVERT_UNKNOWN -3
#define TCL_CONVERT_NOSPACE -4
/*
* The maximum number of bytes that are necessary to represent a single
* Unicode character in UTF-8. The valid values should be 3 or 6 (or
* perhaps 1 if we want to support a non-unicode enabled core).
* If 3, then Tcl_UniChar must be 2-bytes in size (UCS-2). (default)
* If 6, then Tcl_UniChar must be 4-bytes in size (UCS-4).
* At this time UCS-2 mode is the default and recommended mode.
* UCS-4 is experimental and not recommended. It works for the core,
* but most extensions expect UCS-2.
*/
#ifndef TCL_UTF_MAX
#define TCL_UTF_MAX 3
#endif
/*
* This represents a Unicode character. Any changes to this should
* also be reflected in regcustom.h.
*/
#if TCL_UTF_MAX > 3
/*
* unsigned int isn't 100% accurate as it should be a strict 4-byte
* value (perhaps wchar_t). 64-bit systems may have troubles. The
* size of this value must be reflected correctly in regcustom.h.
*/
typedef unsigned int Tcl_UniChar;
#else
typedef unsigned short Tcl_UniChar;
#endif
/*
* Deprecated Tcl procedures:
*/
#ifndef TCL_NO_DEPRECATED
# define Tcl_EvalObj(interp,objPtr) \
Tcl_EvalObjEx((interp),(objPtr),0)
# define Tcl_GlobalEvalObj(interp,objPtr) \
Tcl_EvalObjEx((interp),(objPtr),TCL_EVAL_GLOBAL)
#endif
/*
* These function have been renamed. The old names are deprecated, but we
* define these macros for backwards compatibilty.
*/
#define Tcl_Ckalloc Tcl_Alloc
#define Tcl_Ckfree Tcl_Free
#define Tcl_Ckrealloc Tcl_Realloc
#define Tcl_Return Tcl_SetResult
#define Tcl_TildeSubst Tcl_TranslateFileName
#ifndef _LANG
#define panic Tcl_Panic
#endif
#define panicVA Tcl_PanicVA
/*
* The following constant is used to test for older versions of Tcl
* in the stubs tables.
*
* Jan Nijtman's plus patch uses 0xFCA1BACF, so we need to pick a different
* value since the stubs tables don't match.
*/
#define TCL_STUB_MAGIC ((int)0xFCA3BACF)
/*
* The following function is required to be defined in all stubs aware
* extensions. The function is actually implemented in the stub
* library, not the main Tcl library, although there is a trivial
* implementation in the main library in case an extension is statically
* linked into an application.
*/
EXTERN CONST char * Tcl_InitStubs _ANSI_ARGS_((Tcl_Interp *interp,
CONST char *version, int exact));
#ifndef USE_TCL_STUBS
/*
* When not using stubs, make it a macro.
*/
#define Tcl_InitStubs(interp, version, exact) \
Tcl_PkgRequire(interp, "Tcl", version, exact)
#endif
/*
* Include the public function declarations that are accessible via
* the stubs table.
*/
#include "tclDecls.h"
/*
* Include platform specific public function declarations that are
* accessible via the stubs table.
*/
/*
* tclPlatDecls.h can't be included here on the Mac, as we need
* Mac specific headers to define the Mac types used in this file,
* but these Mac haders conflict with a number of tk types
* and thus can't be included in the globally read tcl.h
* This header was originally added here as a fix for bug 5241
* (stub link error for symbols in TclPlatStubs table), as a work-
* around for the bug on the mac, tclMac.h is included immediately
* after tcl.h in the tcl precompiled header (with DLLEXPORT set).
*/
#if !defined(MAC_TCL)
#include "tclPlatDecls.h"
#endif
/*
* Public functions that are not accessible via the stubs table.
*/
EXTERN void Tcl_Main _ANSI_ARGS_((int argc, char **argv,
Tcl_AppInitProc *appInitProc));
/*
* Convenience declaration of Tcl_AppInit for backwards compatibility.
* This function is not *implemented* by the tcl library, so the storage
* class is neither DLLEXPORT nor DLLIMPORT
*/
#undef TCL_STORAGE_CLASS
#define TCL_STORAGE_CLASS
EXTERN int Tcl_AppInit _ANSI_ARGS_((Tcl_Interp *interp));
#undef TCL_STORAGE_CLASS
#define TCL_STORAGE_CLASS DLLIMPORT
#endif /* RC_INVOKED */
/*
* end block for C++
*/
#ifdef __cplusplus
}
#endif
#endif /* _TCL */
|