Viewing file:  tcl.h (92.61 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* tcl.h --
*
* This header file describes the externally-visible facilities of the
* Tcl interpreter.
*
* Copyright (c) 1987-1994 The Regents of the University of California.
* Copyright (c) 1993-1996 Lucent Technologies.
* Copyright (c) 1994-1998 Sun Microsystems, Inc.
* Copyright (c) 1998-2000 by Scriptics Corporation.
* Copyright (c) 2002 by Kevin B. Kenny. All rights reserved.
*
* See the file "license.terms" for information on usage and redistribution of
* this file, and for a DISCLAIMER OF ALL WARRANTIES.
*/
#ifndef _TCL
#define _TCL
/*
* For C++ compilers, use extern "C"
*/
#ifdef __cplusplus
extern "C" {
#endif
/*
* The following defines are used to indicate the various release levels.
*/
#define TCL_ALPHA_RELEASE 0
#define TCL_BETA_RELEASE 1
#define TCL_FINAL_RELEASE 2
/*
* When version numbers change here, must also go into the following files and
* update the version numbers:
*
* library/init.tcl (1 LOC patch)
* unix/configure.in (2 LOC Major, 2 LOC minor, 1 LOC patch)
* win/configure.in (as above)
* win/tcl.m4 (not patchlevel)
* README (sections 0 and 2, with and without separator)
* macosx/Tcl.pbproj/project.pbxproj (not patchlevel) 1 LOC
* macosx/Tcl.pbproj/default.pbxuser (not patchlevel) 1 LOC
* macosx/Tcl.xcode/project.pbxproj (not patchlevel) 2 LOC
* macosx/Tcl.xcode/default.pbxuser (not patchlevel) 1 LOC
* macosx/Tcl-Common.xcconfig (not patchlevel) 1 LOC
* win/README (not patchlevel) (sections 0 and 2)
* unix/tcl.spec (1 LOC patch)
* tools/tcl.hpj.in (not patchlevel, for windows installer)
*/
#define TCL_MAJOR_VERSION 8
#define TCL_MINOR_VERSION 6
#define TCL_RELEASE_LEVEL TCL_FINAL_RELEASE
#define TCL_RELEASE_SERIAL 8
#define TCL_VERSION "8.6"
#define TCL_PATCH_LEVEL "8.6.8"
/*
*----------------------------------------------------------------------------
* The following definitions set up the proper options for Windows compilers.
* We use this method because there is no autoconf equivalent.
*/
#ifdef _WIN32
# ifndef __WIN32__
# define __WIN32__
# endif
# ifndef WIN32
# define WIN32
# endif
#endif
/*
* Utility macros: STRINGIFY takes an argument and wraps it in "" (double
* quotation marks), JOIN joins two arguments.
*/
#ifndef STRINGIFY
# define STRINGIFY(x) STRINGIFY1(x)
# define STRINGIFY1(x) #x
#endif
#ifndef JOIN
# define JOIN(a,b) JOIN1(a,b)
# define JOIN1(a,b) a##b
#endif
/*
* A special definition used to allow this header file to be included from
* windows resource files so that they can obtain version information.
* RC_INVOKED is defined by default by the windows RC tool.
*
* Resource compilers don't like all the C stuff, like typedefs and function
* declarations, that occur below, so block them out.
*/
#ifndef RC_INVOKED
/*
* Special macro to define mutexes, that doesn't do anything if we are not
* using threads.
*/
#ifdef TCL_THREADS
#define TCL_DECLARE_MUTEX(name) static Tcl_Mutex name;
#else
#define TCL_DECLARE_MUTEX(name)
#endif
/*
* Tcl's public routine Tcl_FSSeek() uses the values SEEK_SET, SEEK_CUR, and
* SEEK_END, all #define'd by stdio.h .
*
* Also, many extensions need stdio.h, and they've grown accustomed to tcl.h
* providing it for them rather than #include-ing it themselves as they
* should, so also for their sake, we keep the #include to be consistent with
* prior Tcl releases.
*/
#include <stdio.h>
/*
*----------------------------------------------------------------------------
* Support for functions with a variable number of arguments.
*
* The following TCL_VARARGS* macros are to support old extensions
* written for older versions of Tcl where the macros permitted
* support for the varargs.h system as well as stdarg.h .
*
* New code should just directly be written to use stdarg.h conventions.
*/
#include <stdarg.h>
#ifndef TCL_NO_DEPRECATED
# define TCL_VARARGS(type, name) (type name, ...)
# define TCL_VARARGS_DEF(type, name) (type name, ...)
# define TCL_VARARGS_START(type, name, list) (va_start(list, name), name)
#endif
#if defined(__GNUC__) && (__GNUC__ > 2)
# define TCL_FORMAT_PRINTF(a,b) __attribute__ ((__format__ (__printf__, a, b)))
# define TCL_NORETURN __attribute__ ((noreturn))
# if defined(BUILD_tcl) || defined(BUILD_tk)
# define TCL_NORETURN1 __attribute__ ((noreturn))
# else
# define TCL_NORETURN1 /* nothing */
# endif
#else
# define TCL_FORMAT_PRINTF(a,b)
# if defined(_MSC_VER) && (_MSC_VER >= 1310)
# define TCL_NORETURN _declspec(noreturn)
# else
# define TCL_NORETURN /* nothing */
# endif
# define TCL_NORETURN1 /* nothing */
#endif
/*
* Allow a part of Tcl's API to be explicitly marked as deprecated.
*
* Used to make TIP 330/336 generate moans even if people use the
* compatibility macros. Change your code, guys! We won't support you forever.
*/
#if defined(__GNUC__) && ((__GNUC__ >= 4) || ((__GNUC__ == 3) && (__GNUC_MINOR__ >= 1)))
# if (__GNUC__ > 4) || ((__GNUC__ == 4) && (__GNUC_MINOR__ >= 5))
# define TCL_DEPRECATED_API(msg) __attribute__ ((__deprecated__ (msg)))
# else
# define TCL_DEPRECATED_API(msg) __attribute__ ((__deprecated__))
# endif
#else
# define TCL_DEPRECATED_API(msg) /* nothing portable */
#endif
/*
*----------------------------------------------------------------------------
* Macros used to declare a function to be exported by a DLL. Used by Windows,
* maps to no-op declarations on non-Windows systems. The default build on
* windows is for a DLL, which causes the DLLIMPORT and DLLEXPORT macros to be
* nonempty. To build a static library, the macro STATIC_BUILD should be
* defined.
*
* Note: when building static but linking dynamically to MSVCRT we must still
* correctly decorate the C library imported function. Use CRTIMPORT
* for this purpose. _DLL is defined by the compiler when linking to
* MSVCRT.
*/
#if (defined(_WIN32) && (defined(_MSC_VER) || (defined(__BORLANDC__) && (__BORLANDC__ >= 0x0550)) || defined(__LCC__) || defined(__WATCOMC__) || (defined(__GNUC__) && defined(__declspec))))
# define HAVE_DECLSPEC 1
# ifdef STATIC_BUILD
# define DLLIMPORT
# define DLLEXPORT
# ifdef _DLL
# define CRTIMPORT __declspec(dllimport)
# else
# define CRTIMPORT
# endif
# else
# define DLLIMPORT __declspec(dllimport)
# define DLLEXPORT __declspec(dllexport)
# define CRTIMPORT __declspec(dllimport)
# endif
#else
# define DLLIMPORT
# if defined(__GNUC__) && __GNUC__ > 3
# define DLLEXPORT __attribute__ ((visibility("default")))
# else
# define DLLEXPORT
# endif
# define CRTIMPORT
#endif
/*
* These macros are used to control whether functions are being declared for
* import or export. If a function is being declared while it is being built
* to be included in a shared library, then it should have the DLLEXPORT
* storage class. If is being declared for use by a module that is going to
* link against the shared library, then it should have the DLLIMPORT storage
* class. If the symbol is beind declared for a static build or for use from a
* stub library, then the storage class should be empty.
*
* The convention is that a macro called BUILD_xxxx, where xxxx is the name of
* a library we are building, is set on the compile line for sources that are
* to be placed in the library. When this macro is set, the storage class will
* be set to DLLEXPORT. At the end of the header file, the storage class will
* be reset to DLLIMPORT.
*/
#undef TCL_STORAGE_CLASS
#ifdef BUILD_tcl
# define TCL_STORAGE_CLASS DLLEXPORT
#else
# ifdef USE_TCL_STUBS
# define TCL_STORAGE_CLASS
# else
# define TCL_STORAGE_CLASS DLLIMPORT
# endif
#endif
/*
* The following _ANSI_ARGS_ macro is to support old extensions
* written for older versions of Tcl where it permitted support
* for compilers written in the pre-prototype era of C.
*
* New code should use prototypes.
*/
#ifndef TCL_NO_DEPRECATED
# undef _ANSI_ARGS_
# define _ANSI_ARGS_(x) x
#endif
/*
* Definitions that allow this header file to be used either with or without
* ANSI C features.
*/
#ifndef INLINE
# define INLINE
#endif
#ifdef NO_CONST
# ifndef const
# define const
# endif
#endif
#ifndef CONST
# define CONST const
#endif
#ifdef USE_NON_CONST
# ifdef USE_COMPAT_CONST
# error define at most one of USE_NON_CONST and USE_COMPAT_CONST
# endif
# define CONST84
# define CONST84_RETURN
#else
# ifdef USE_COMPAT_CONST
# define CONST84
# define CONST84_RETURN const
# else
# define CONST84 const
# define CONST84_RETURN const
# endif
#endif
#ifndef CONST86
# define CONST86 CONST84
#endif
/*
* Make sure EXTERN isn't defined elsewhere.
*/
#ifdef EXTERN
# undef EXTERN
#endif /* EXTERN */
#ifdef __cplusplus
# define EXTERN extern "C" TCL_STORAGE_CLASS
#else
# define EXTERN extern TCL_STORAGE_CLASS
#endif
/*
*----------------------------------------------------------------------------
* The following code is copied from winnt.h. If we don't replicate it here,
* then <windows.h> can't be included after tcl.h, since tcl.h also defines
* VOID. This block is skipped under Cygwin and Mingw.
*/
#if defined(_WIN32) && !defined(HAVE_WINNT_IGNORE_VOID)
#ifndef VOID
#define VOID void
typedef char CHAR;
typedef short SHORT;
typedef long LONG;
#endif
#endif /* _WIN32 && !HAVE_WINNT_IGNORE_VOID */
/*
* Macro to use instead of "void" for arguments that must have type "void *"
* in ANSI C; maps them to type "char *" in non-ANSI systems.
*/
#ifndef __VXWORKS__
# ifndef NO_VOID
# define VOID void
# else
# define VOID char
# endif
#endif
/*
* Miscellaneous declarations.
*/
#ifndef _CLIENTDATA
# ifndef NO_VOID
typedef void *ClientData;
# else
typedef int *ClientData;
# endif
# define _CLIENTDATA
#endif
/*
* Darwin specific configure overrides (to support fat compiles, where
* configure runs only once for multiple architectures):
*/
#ifdef __APPLE__
# ifdef __LP64__
# undef TCL_WIDE_INT_TYPE
# define TCL_WIDE_INT_IS_LONG 1
# define TCL_CFG_DO64BIT 1
# else /* !__LP64__ */
# define TCL_WIDE_INT_TYPE long long
# undef TCL_WIDE_INT_IS_LONG
# undef TCL_CFG_DO64BIT
# endif /* __LP64__ */
# undef HAVE_STRUCT_STAT64
#endif /* __APPLE__ */
/*
* Define Tcl_WideInt to be a type that is (at least) 64-bits wide, and define
* Tcl_WideUInt to be the unsigned variant of that type (assuming that where
* we have one, we can have the other.)
*
* Also defines the following macros:
* TCL_WIDE_INT_IS_LONG - if wide ints are really longs (i.e. we're on a
* LP64 system such as modern Solaris or Linux ... not including Win64)
* Tcl_WideAsLong - forgetful converter from wideInt to long.
* Tcl_LongAsWide - sign-extending converter from long to wideInt.
* Tcl_WideAsDouble - converter from wideInt to double.
* Tcl_DoubleAsWide - converter from double to wideInt.
*
* The following invariant should hold for any long value 'longVal':
* longVal == Tcl_WideAsLong(Tcl_LongAsWide(longVal))
*
* Note on converting between Tcl_WideInt and strings. This implementation (in
* tclObj.c) depends on the function
* sprintf(...,"%" TCL_LL_MODIFIER "d",...).
*/
#if !defined(TCL_WIDE_INT_TYPE)&&!defined(TCL_WIDE_INT_IS_LONG)
# if defined(_WIN32)
# define TCL_WIDE_INT_TYPE __int64
# ifdef __BORLANDC__
# define TCL_LL_MODIFIER "L"
# else /* __BORLANDC__ */
# define TCL_LL_MODIFIER "I64"
# endif /* __BORLANDC__ */
# elif defined(__GNUC__)
# define TCL_WIDE_INT_TYPE long long
# define TCL_LL_MODIFIER "ll"
# else /* ! _WIN32 && ! __GNUC__ */
/*
* Don't know what platform it is and configure hasn't discovered what is
* going on for us. Try to guess...
*/
# include <limits.h>
# if (INT_MAX < LONG_MAX)
# define TCL_WIDE_INT_IS_LONG 1
# else
# define TCL_WIDE_INT_TYPE long long
# endif
# endif /* _WIN32 */
#endif /* !TCL_WIDE_INT_TYPE & !TCL_WIDE_INT_IS_LONG */
#ifdef TCL_WIDE_INT_IS_LONG
# undef TCL_WIDE_INT_TYPE
# define TCL_WIDE_INT_TYPE long
#endif /* TCL_WIDE_INT_IS_LONG */
typedef TCL_WIDE_INT_TYPE Tcl_WideInt;
typedef unsigned TCL_WIDE_INT_TYPE Tcl_WideUInt;
#ifdef TCL_WIDE_INT_IS_LONG
# define Tcl_WideAsLong(val) ((long)(val))
# define Tcl_LongAsWide(val) ((long)(val))
# define Tcl_WideAsDouble(val) ((double)((long)(val)))
# define Tcl_DoubleAsWide(val) ((long)((double)(val)))
# ifndef TCL_LL_MODIFIER
# define TCL_LL_MODIFIER "l"
# endif /* !TCL_LL_MODIFIER */
#else /* TCL_WIDE_INT_IS_LONG */
/*
* The next short section of defines are only done when not running on Windows
* or some other strange platform.
*/
# ifndef TCL_LL_MODIFIER
# define TCL_LL_MODIFIER "ll"
# endif /* !TCL_LL_MODIFIER */
# define Tcl_WideAsLong(val) ((long)((Tcl_WideInt)(val)))
# define Tcl_LongAsWide(val) ((Tcl_WideInt)((long)(val)))
# define Tcl_WideAsDouble(val) ((double)((Tcl_WideInt)(val)))
# define Tcl_DoubleAsWide(val) ((Tcl_WideInt)((double)(val)))
#endif /* TCL_WIDE_INT_IS_LONG */
#if defined(_WIN32)
# ifdef __BORLANDC__
typedef struct stati64 Tcl_StatBuf;
# elif defined(_WIN64)
typedef struct __stat64 Tcl_StatBuf;
# elif (defined(_MSC_VER) && (_MSC_VER < 1400)) || defined(_USE_32BIT_TIME_T)
typedef struct _stati64 Tcl_StatBuf;
# else
typedef struct _stat32i64 Tcl_StatBuf;
# endif /* _MSC_VER < 1400 */
#elif defined(__CYGWIN__)
typedef struct {
dev_t st_dev;
unsigned short st_ino;
unsigned short st_mode;
short st_nlink;
short st_uid;
short st_gid;
/* Here is a 2-byte gap */
dev_t st_rdev;
/* Here is a 4-byte gap */
long long st_size;
struct {long tv_sec;} st_atim;
struct {long tv_sec;} st_mtim;
struct {long tv_sec;} st_ctim;
/* Here is a 4-byte gap */
} Tcl_StatBuf;
#elif defined(HAVE_STRUCT_STAT64) && !defined(__APPLE__)
typedef struct stat64 Tcl_StatBuf;
#else
typedef struct stat Tcl_StatBuf;
#endif
/*
*----------------------------------------------------------------------------
* Data structures defined opaquely in this module. The definitions below just
* provide dummy types. A few fields are made visible in Tcl_Interp
* structures, namely those used for returning a string result from commands.
* Direct access to the result field is discouraged in Tcl 8.0. The
* interpreter result is either an object or a string, and the two values are
* kept consistent unless some C code sets interp->result directly.
* Programmers should use either the function Tcl_GetObjResult() or
* Tcl_GetStringResult() to read the interpreter's result. See the SetResult
* man page for details.
*
* Note: any change to the Tcl_Interp definition below must be mirrored in the
* "real" definition in tclInt.h.
*
* Note: Tcl_ObjCmdProc functions do not directly set result and freeProc.
* Instead, they set a Tcl_Obj member in the "real" structure that can be
* accessed with Tcl_GetObjResult() and Tcl_SetObjResult().
*/
typedef struct Tcl_Interp
#ifndef TCL_NO_DEPRECATED
{
/* TIP #330: Strongly discourage extensions from using the string
* result. */
#ifdef USE_INTERP_RESULT
char *result TCL_DEPRECATED_API("use Tcl_GetStringResult/Tcl_SetResult");
/* If the last command returned a string
* result, this points to it. */
void (*freeProc) (char *blockPtr)
TCL_DEPRECATED_API("use Tcl_GetStringResult/Tcl_SetResult");
/* Zero means the string result is statically
* allocated. TCL_DYNAMIC means it was
* allocated with ckalloc and should be freed
* with ckfree. Other values give the address
* of function to invoke to free the result.
* Tcl_Eval must free it before executing next
* command. */
#else
char *resultDontUse; /* Don't use in extensions! */
void (*freeProcDontUse) (char *); /* Don't use in extensions! */
#endif
#ifdef USE_INTERP_ERRORLINE
int errorLine TCL_DEPRECATED_API("use Tcl_GetErrorLine/Tcl_SetErrorLine");
/* When TCL_ERROR is returned, this gives the
* line number within the command where the
* error occurred (1 if first line). */
#else
int errorLineDontUse; /* Don't use in extensions! */
#endif
}
#endif /* TCL_NO_DEPRECATED */
Tcl_Interp;
typedef struct Tcl_AsyncHandler_ *Tcl_AsyncHandler;
typedef struct Tcl_Channel_ *Tcl_Channel;
typedef struct Tcl_ChannelTypeVersion_ *Tcl_ChannelTypeVersion;
typedef struct Tcl_Command_ *Tcl_Command;
typedef struct Tcl_Condition_ *Tcl_Condition;
typedef struct Tcl_Dict_ *Tcl_Dict;
typedef struct Tcl_EncodingState_ *Tcl_EncodingState;
typedef struct Tcl_Encoding_ *Tcl_Encoding;
typedef struct Tcl_Event Tcl_Event;
typedef struct Tcl_InterpState_ *Tcl_InterpState;
typedef struct Tcl_LoadHandle_ *Tcl_LoadHandle;
typedef struct Tcl_Mutex_ *Tcl_Mutex;
typedef struct Tcl_Pid_ *Tcl_Pid;
typedef struct Tcl_RegExp_ *Tcl_RegExp;
typedef struct Tcl_ThreadDataKey_ *Tcl_ThreadDataKey;
typedef struct Tcl_ThreadId_ *Tcl_ThreadId;
typedef struct Tcl_TimerToken_ *Tcl_TimerToken;
typedef struct Tcl_Trace_ *Tcl_Trace;
typedef struct Tcl_Var_ *Tcl_Var;
typedef struct Tcl_ZLibStream_ *Tcl_ZlibStream;
/*
*----------------------------------------------------------------------------
* Definition of the interface to functions implementing threads. A function
* following this definition is given to each call of 'Tcl_CreateThread' and
* will be called as the main fuction of the new thread created by that call.
*/
#if defined _WIN32
typedef unsigned (__stdcall Tcl_ThreadCreateProc) (ClientData clientData);
#else
typedef void (Tcl_ThreadCreateProc) (ClientData clientData);
#endif
/*
* Threading function return types used for abstracting away platform
* differences when writing a Tcl_ThreadCreateProc. See the NewThread function
* in generic/tclThreadTest.c for it's usage.
*/
#if defined _WIN32
# define Tcl_ThreadCreateType unsigned __stdcall
# define TCL_THREAD_CREATE_RETURN return 0
#else
# define Tcl_ThreadCreateType void
# define TCL_THREAD_CREATE_RETURN
#endif
/*
* Definition of values for default stacksize and the possible flags to be
* given to Tcl_CreateThread.
*/
#define TCL_THREAD_STACK_DEFAULT (0) /* Use default size for stack. */
#define TCL_THREAD_NOFLAGS (0000) /* Standard flags, default
* behaviour. */
#define TCL_THREAD_JOINABLE (0001) /* Mark the thread as joinable. */
/*
* Flag values passed to Tcl_StringCaseMatch.
*/
#define TCL_MATCH_NOCASE (1<<0)
/*
* Flag values passed to Tcl_GetRegExpFromObj.
*/
#define TCL_REG_BASIC 000000 /* BREs (convenience). */
#define TCL_REG_EXTENDED 000001 /* EREs. */
#define TCL_REG_ADVF 000002 /* Advanced features in EREs. */
#define TCL_REG_ADVANCED 000003 /* AREs (which are also EREs). */
#define TCL_REG_QUOTE 000004 /* No special characters, none. */
#define TCL_REG_NOCASE 000010 /* Ignore case. */
#define TCL_REG_NOSUB 000020 /* Don't care about subexpressions. */
#define TCL_REG_EXPANDED 000040 /* Expanded format, white space &
* comments. */
#define TCL_REG_NLSTOP 000100 /* \n doesn't match . or [^ ] */
#define TCL_REG_NLANCH 000200 /* ^ matches after \n, $ before. */
#define TCL_REG_NEWLINE 000300 /* Newlines are line terminators. */
#define TCL_REG_CANMATCH 001000 /* Report details on partial/limited
* matches. */
/*
* Flags values passed to Tcl_RegExpExecObj.
*/
#define TCL_REG_NOTBOL 0001 /* Beginning of string does not match ^. */
#define TCL_REG_NOTEOL 0002 /* End of string does not match $. */
/*
* Structures filled in by Tcl_RegExpInfo. Note that all offset values are
* relative to the start of the match string, not the beginning of the entire
* string.
*/
typedef struct Tcl_RegExpIndices {
long start; /* Character offset of first character in
* match. */
long end; /* Character offset of first character after
* the match. */
} Tcl_RegExpIndices;
typedef struct Tcl_RegExpInfo {
int nsubs; /* Number of subexpressions in the compiled
* expression. */
Tcl_RegExpIndices *matches; /* Array of nsubs match offset pairs. */
long extendStart; /* The offset at which a subsequent match
* might begin. */
long reserved; /* Reserved for later use. */
} Tcl_RegExpInfo;
/*
* Picky compilers complain if this typdef doesn't appear before the struct's
* reference in tclDecls.h.
*/
typedef Tcl_StatBuf *Tcl_Stat_;
typedef struct stat *Tcl_OldStat_;
/*
*----------------------------------------------------------------------------
* When a TCL command returns, the interpreter contains a result from the
* command. Programmers are strongly encouraged to use one of the functions
* Tcl_GetObjResult() or Tcl_GetStringResult() to read the interpreter's
* result. See the SetResult man page for details. Besides this result, the
* command function returns an integer code, which is one of the following:
*
* TCL_OK Command completed normally; the interpreter's result
* contains the command's result.
* TCL_ERROR The command couldn't be completed successfully; the
* interpreter's result describes what went wrong.
* TCL_RETURN The command requests that the current function return;
* the interpreter's result contains the function's
* return value.
* TCL_BREAK The command requests that the innermost loop be
* exited; the interpreter's result is meaningless.
* TCL_CONTINUE Go on to the next iteration of the current loop; the
* interpreter's result is meaningless.
*/
#define TCL_OK 0
#define TCL_ERROR 1
#define TCL_RETURN 2
#define TCL_BREAK 3
#define TCL_CONTINUE 4
#define TCL_RESULT_SIZE 200
/*
*----------------------------------------------------------------------------
* Flags to control what substitutions are performed by Tcl_SubstObj():
*/
#define TCL_SUBST_COMMANDS 001
#define TCL_SUBST_VARIABLES 002
#define TCL_SUBST_BACKSLASHES 004
#define TCL_SUBST_ALL 007
/*
* Argument descriptors for math function callbacks in expressions:
*/
typedef enum {
TCL_INT, TCL_DOUBLE, TCL_EITHER, TCL_WIDE_INT
} Tcl_ValueType;
typedef struct Tcl_Value {
Tcl_ValueType type; /* Indicates intValue or doubleValue is valid,
* or both. */
long intValue; /* Integer value. */
double doubleValue; /* Double-precision floating value. */
Tcl_WideInt wideValue; /* Wide (min. 64-bit) integer value. */
} Tcl_Value;
/*
* Forward declaration of Tcl_Obj to prevent an error when the forward
* reference to Tcl_Obj is encountered in the function types declared below.
*/
struct Tcl_Obj;
/*
*----------------------------------------------------------------------------
* Function types defined by Tcl:
*/
typedef int (Tcl_AppInitProc) (Tcl_Interp *interp);
typedef int (Tcl_AsyncProc) (ClientData clientData, Tcl_Interp *interp,
int code);
typedef void (Tcl_ChannelProc) (ClientData clientData, int mask);
typedef void (Tcl_CloseProc) (ClientData data);
typedef void (Tcl_CmdDeleteProc) (ClientData clientData);
typedef int (Tcl_CmdProc) (ClientData clientData, Tcl_Interp *interp,
int argc, CONST84 char *argv[]);
typedef void (Tcl_CmdTraceProc) (ClientData clientData, Tcl_Interp *interp,
int level, char *command, Tcl_CmdProc *proc,
ClientData cmdClientData, int argc, CONST84 char *argv[]);
typedef int (Tcl_CmdObjTraceProc) (ClientData clientData, Tcl_Interp *interp,
int level, const char *command, Tcl_Command commandInfo, int objc,
struct Tcl_Obj *const *objv);
typedef void (Tcl_CmdObjTraceDeleteProc) (ClientData clientData);
typedef void (Tcl_DupInternalRepProc) (struct Tcl_Obj *srcPtr,
struct Tcl_Obj *dupPtr);
typedef int (Tcl_EncodingConvertProc) (ClientData clientData, const char *src,
int srcLen, int flags, Tcl_EncodingState *statePtr, char *dst,
int dstLen, int *srcReadPtr, int *dstWrotePtr, int *dstCharsPtr);
typedef void (Tcl_EncodingFreeProc) (ClientData clientData);
typedef int (Tcl_EventProc) (Tcl_Event *evPtr, int flags);
typedef void (Tcl_EventCheckProc) (ClientData clientData, int flags);
typedef int (Tcl_EventDeleteProc) (Tcl_Event *evPtr, ClientData clientData);
typedef void (Tcl_EventSetupProc) (ClientData clientData, int flags);
typedef void (Tcl_ExitProc) (ClientData clientData);
typedef void (Tcl_FileProc) (ClientData clientData, int mask);
typedef void (Tcl_FileFreeProc) (ClientData clientData);
typedef void (Tcl_FreeInternalRepProc) (struct Tcl_Obj *objPtr);
typedef void (Tcl_FreeProc) (char *blockPtr);
typedef void (Tcl_IdleProc) (ClientData clientData);
typedef void (Tcl_InterpDeleteProc) (ClientData clientData,
Tcl_Interp *interp);
typedef int (Tcl_MathProc) (ClientData clientData, Tcl_Interp *interp,
Tcl_Value *args, Tcl_Value *resultPtr);
typedef void (Tcl_NamespaceDeleteProc) (ClientData clientData);
typedef int (Tcl_ObjCmdProc) (ClientData clientData, Tcl_Interp *interp,
int objc, struct Tcl_Obj *const *objv);
typedef int (Tcl_PackageInitProc) (Tcl_Interp *interp);
typedef int (Tcl_PackageUnloadProc) (Tcl_Interp *interp, int flags);
typedef void (Tcl_PanicProc) (const char *format, ...);
typedef void (Tcl_TcpAcceptProc) (ClientData callbackData, Tcl_Channel chan,
char *address, int port);
typedef void (Tcl_TimerProc) (ClientData clientData);
typedef int (Tcl_SetFromAnyProc) (Tcl_Interp *interp, struct Tcl_Obj *objPtr);
typedef void (Tcl_UpdateStringProc) (struct Tcl_Obj *objPtr);
typedef char * (Tcl_VarTraceProc) (ClientData clientData, Tcl_Interp *interp,
CONST84 char *part1, CONST84 char *part2, int flags);
typedef void (Tcl_CommandTraceProc) (ClientData clientData, Tcl_Interp *interp,
const char *oldName, const char *newName, int flags);
typedef void (Tcl_CreateFileHandlerProc) (int fd, int mask, Tcl_FileProc *proc,
ClientData clientData);
typedef void (Tcl_DeleteFileHandlerProc) (int fd);
typedef void (Tcl_AlertNotifierProc) (ClientData clientData);
typedef void (Tcl_ServiceModeHookProc) (int mode);
typedef ClientData (Tcl_InitNotifierProc) (void);
typedef void (Tcl_FinalizeNotifierProc) (ClientData clientData);
typedef void (Tcl_MainLoopProc) (void);
/*
*----------------------------------------------------------------------------
* The following structure represents a type of object, which is a particular
* internal representation for an object plus a set of functions that provide
* standard operations on objects of that type.
*/
typedef struct Tcl_ObjType {
const char *name; /* Name of the type, e.g. "int". */
Tcl_FreeInternalRepProc *freeIntRepProc;
/* Called to free any storage for the type's
* internal rep. NULL if the internal rep does
* not need freeing. */
Tcl_DupInternalRepProc *dupIntRepProc;
/* Called to create a new object as a copy of
* an existing object. */
Tcl_UpdateStringProc *updateStringProc;
/* Called to update the string rep from the
* type's internal representation. */
Tcl_SetFromAnyProc *setFromAnyProc;
/* Called to convert the object's internal rep
* to this type. Frees the internal rep of the
* old type. Returns TCL_ERROR on failure. */
} Tcl_ObjType;
/*
* One of the following structures exists for each object in the Tcl system.
* An object stores a value as either a string, some internal representation,
* or both.
*/
typedef struct Tcl_Obj {
int refCount; /* When 0 the object will be freed. */
char *bytes; /* This points to the first byte of the
* object's string representation. The array
* must be followed by a null byte (i.e., at
* offset length) but may also contain
* embedded null characters. The array's
* storage is allocated by ckalloc. NULL means
* the string rep is invalid and must be
* regenerated from the internal rep. Clients
* should use Tcl_GetStringFromObj or
* Tcl_GetString to get a pointer to the byte
* array as a readonly value. */
int length; /* The number of bytes at *bytes, not
* including the terminating null. */
const Tcl_ObjType *typePtr; /* Denotes the object's type. Always
* corresponds to the type of the object's
* internal rep. NULL indicates the object has
* no internal rep (has no type). */
union { /* The internal representation: */
long longValue; /* - an long integer value. */
double doubleValue; /* - a double-precision floating value. */
void *otherValuePtr; /* - another, type-specific value,
not used internally any more. */
Tcl_WideInt wideValue; /* - a long long value. */
struct { /* - internal rep as two pointers.
* the main use of which is a bignum's
* tightly packed fields, where the alloc,
* used and signum flags are packed into
* ptr2 with everything else hung off ptr1. */
void *ptr1;
void *ptr2;
} twoPtrValue;
struct { /* - internal rep as a pointer and a long,
not used internally any more. */
void *ptr;
unsigned long value;
} ptrAndLongRep;
} internalRep;
} Tcl_Obj;
/*
* Macros to increment and decrement a Tcl_Obj's reference count, and to test
* whether an object is shared (i.e. has reference count > 1). Note: clients
* should use Tcl_DecrRefCount() when they are finished using an object, and
* should never call TclFreeObj() directly. TclFreeObj() is only defined and
* made public in tcl.h to support Tcl_DecrRefCount's macro definition.
*/
void Tcl_IncrRefCount(Tcl_Obj *objPtr);
void Tcl_DecrRefCount(Tcl_Obj *objPtr);
int Tcl_IsShared(Tcl_Obj *objPtr);
/*
*----------------------------------------------------------------------------
* The following structure contains the state needed by Tcl_SaveResult. No-one
* outside of Tcl should access any of these fields. This structure is
* typically allocated on the stack.
*/
typedef struct Tcl_SavedResult {
char *result;
Tcl_FreeProc *freeProc;
Tcl_Obj *objResultPtr;
char *appendResult;
int appendAvl;
int appendUsed;
char resultSpace[TCL_RESULT_SIZE+1];
} Tcl_SavedResult;
/*
*----------------------------------------------------------------------------
* The following definitions support Tcl's namespace facility. Note: the first
* five fields must match exactly the fields in a Namespace structure (see
* tclInt.h).
*/
typedef struct Tcl_Namespace {
char *name; /* The namespace's name within its parent
* namespace. This contains no ::'s. The name
* of the global namespace is "" although "::"
* is an synonym. */
char *fullName; /* The namespace's fully qualified name. This
* starts with ::. */
ClientData clientData; /* Arbitrary value associated with this
* namespace. */
Tcl_NamespaceDeleteProc *deleteProc;
/* Function invoked when deleting the
* namespace to, e.g., free clientData. */
struct Tcl_Namespace *parentPtr;
/* Points to the namespace that contains this
* one. NULL if this is the global
* namespace. */
} Tcl_Namespace;
/*
*----------------------------------------------------------------------------
* The following structure represents a call frame, or activation record. A
* call frame defines a naming context for a procedure call: its local scope
* (for local variables) and its namespace scope (used for non-local
* variables; often the global :: namespace). A call frame can also define the
* naming context for a namespace eval or namespace inscope command: the
* namespace in which the command's code should execute. The Tcl_CallFrame
* structures exist only while procedures or namespace eval/inscope's are
* being executed, and provide a Tcl call stack.
*
* A call frame is initialized and pushed using Tcl_PushCallFrame and popped
* using Tcl_PopCallFrame. Storage for a Tcl_CallFrame must be provided by the
* Tcl_PushCallFrame caller, and callers typically allocate them on the C call
* stack for efficiency. For this reason, Tcl_CallFrame is defined as a
* structure and not as an opaque token. However, most Tcl_CallFrame fields
* are hidden since applications should not access them directly; others are
* declared as "dummyX".
*
* WARNING!! The structure definition must be kept consistent with the
* CallFrame structure in tclInt.h. If you change one, change the other.
*/
typedef struct Tcl_CallFrame {
Tcl_Namespace *nsPtr;
int dummy1;
int dummy2;
void *dummy3;
void *dummy4;
void *dummy5;
int dummy6;
void *dummy7;
void *dummy8;
int dummy9;
void *dummy10;
void *dummy11;
void *dummy12;
void *dummy13;
} Tcl_CallFrame;
/*
*----------------------------------------------------------------------------
* Information about commands that is returned by Tcl_GetCommandInfo and
* passed to Tcl_SetCommandInfo. objProc is an objc/objv object-based command
* function while proc is a traditional Tcl argc/argv string-based function.
* Tcl_CreateObjCommand and Tcl_CreateCommand ensure that both objProc and
* proc are non-NULL and can be called to execute the command. However, it may
* be faster to call one instead of the other. The member isNativeObjectProc
* is set to 1 if an object-based function was registered by
* Tcl_CreateObjCommand, and to 0 if a string-based function was registered by
* Tcl_CreateCommand. The other function is typically set to a compatibility
* wrapper that does string-to-object or object-to-string argument conversions
* then calls the other function.
*/
typedef struct Tcl_CmdInfo {
int isNativeObjectProc; /* 1 if objProc was registered by a call to
* Tcl_CreateObjCommand; 0 otherwise.
* Tcl_SetCmdInfo does not modify this
* field. */
Tcl_ObjCmdProc *objProc; /* Command's object-based function. */
ClientData objClientData; /* ClientData for object proc. */
Tcl_CmdProc *proc; /* Command's string-based function. */
ClientData clientData; /* ClientData for string proc. */
Tcl_CmdDeleteProc *deleteProc;
/* Function to call when command is
* deleted. */
ClientData deleteData; /* Value to pass to deleteProc (usually the
* same as clientData). */
Tcl_Namespace *namespacePtr;/* Points to the namespace that contains this
* command. Note that Tcl_SetCmdInfo will not
* change a command's namespace; use
* TclRenameCommand or Tcl_Eval (of 'rename')
* to do that. */
} Tcl_CmdInfo;
/*
*----------------------------------------------------------------------------
* The structure defined below is used to hold dynamic strings. The only
* fields that clients should use are string and length, accessible via the
* macros Tcl_DStringValue and Tcl_DStringLength.
*/
#define TCL_DSTRING_STATIC_SIZE 200
typedef struct Tcl_DString {
char *string; /* Points to beginning of string: either
* staticSpace below or a malloced array. */
int length; /* Number of non-NULL characters in the
* string. */
int spaceAvl; /* Total number of bytes available for the
* string and its terminating NULL char. */
char staticSpace[TCL_DSTRING_STATIC_SIZE];
/* Space to use in common case where string is
* small. */
} Tcl_DString;
#define Tcl_DStringLength(dsPtr) ((dsPtr)->length)
#define Tcl_DStringValue(dsPtr) ((dsPtr)->string)
#define Tcl_DStringTrunc Tcl_DStringSetLength
/*
* Definitions for the maximum number of digits of precision that may be
* specified in the "tcl_precision" variable, and the number of bytes of
* buffer space required by Tcl_PrintDouble.
*/
#define TCL_MAX_PREC 17
#define TCL_DOUBLE_SPACE (TCL_MAX_PREC+10)
/*
* Definition for a number of bytes of buffer space sufficient to hold the
* string representation of an integer in base 10 (assuming the existence of
* 64-bit integers).
*/
#define TCL_INTEGER_SPACE 24
/*
* Flag values passed to Tcl_ConvertElement.
* TCL_DONT_USE_BRACES forces it not to enclose the element in braces, but to
* use backslash quoting instead.
* TCL_DONT_QUOTE_HASH disables the default quoting of the '#' character. It
* is safe to leave the hash unquoted when the element is not the first
* element of a list, and this flag can be used by the caller to indicate
* that condition.
*/
#define TCL_DONT_USE_BRACES 1
#define TCL_DONT_QUOTE_HASH 8
/*
* Flag that may be passed to Tcl_GetIndexFromObj to force it to disallow
* abbreviated strings.
*/
#define TCL_EXACT 1
/*
*----------------------------------------------------------------------------
* Flag values passed to Tcl_RecordAndEval, Tcl_EvalObj, Tcl_EvalObjv.
* WARNING: these bit choices must not conflict with the bit choices for
* evalFlag bits in tclInt.h!
*
* Meanings:
* TCL_NO_EVAL: Just record this command
* TCL_EVAL_GLOBAL: Execute script in global namespace
* TCL_EVAL_DIRECT: Do not compile this script
* TCL_EVAL_INVOKE: Magical Tcl_EvalObjv mode for aliases/ensembles
* o Run in iPtr->lookupNsPtr or global namespace
* o Cut out of error traces
* o Don't reset the flags controlling ensemble
* error message rewriting.
* TCL_CANCEL_UNWIND: Magical Tcl_CancelEval mode that causes the
* stack for the script in progress to be
* completely unwound.
* TCL_EVAL_NOERR: Do no exception reporting at all, just return
* as the caller will report.
*/
#define TCL_NO_EVAL 0x010000
#define TCL_EVAL_GLOBAL 0x020000
#define TCL_EVAL_DIRECT 0x040000
#define TCL_EVAL_INVOKE 0x080000
#define TCL_CANCEL_UNWIND 0x100000
#define TCL_EVAL_NOERR 0x200000
/*
* Special freeProc values that may be passed to Tcl_SetResult (see the man
* page for details):
*/
#define TCL_VOLATILE ((Tcl_FreeProc *) 1)
#define TCL_STATIC ((Tcl_FreeProc *) 0)
#define TCL_DYNAMIC ((Tcl_FreeProc *) 3)
/*
* Flag values passed to variable-related functions.
* WARNING: these bit choices must not conflict with the bit choice for
* TCL_CANCEL_UNWIND, above.
*/
#define TCL_GLOBAL_ONLY 1
#define TCL_NAMESPACE_ONLY 2
#define TCL_APPEND_VALUE 4
#define TCL_LIST_ELEMENT 8
#define TCL_TRACE_READS 0x10
#define TCL_TRACE_WRITES 0x20
#define TCL_TRACE_UNSETS 0x40
#define TCL_TRACE_DESTROYED 0x80
#define TCL_INTERP_DESTROYED 0x100
#define TCL_LEAVE_ERR_MSG 0x200
#define TCL_TRACE_ARRAY 0x800
#ifndef TCL_REMOVE_OBSOLETE_TRACES
/* Required to support old variable/vdelete/vinfo traces. */
#define TCL_TRACE_OLD_STYLE 0x1000
#endif
/* Indicate the semantics of the result of a trace. */
#define TCL_TRACE_RESULT_DYNAMIC 0x8000
#define TCL_TRACE_RESULT_OBJECT 0x10000
/*
* Flag values for ensemble commands.
*/
#define TCL_ENSEMBLE_PREFIX 0x02/* Flag value to say whether to allow
* unambiguous prefixes of commands or to
* require exact matches for command names. */
/*
* Flag values passed to command-related functions.
*/
#define TCL_TRACE_RENAME 0x2000
#define TCL_TRACE_DELETE 0x4000
#define TCL_ALLOW_INLINE_COMPILATION 0x20000
/*
* The TCL_PARSE_PART1 flag is deprecated and has no effect. The part1 is now
* always parsed whenever the part2 is NULL. (This is to avoid a common error
* when converting code to use the new object based APIs and forgetting to
* give the flag)
*/
#ifndef TCL_NO_DEPRECATED
# define TCL_PARSE_PART1 0x400
#endif
/*
* Types for linked variables:
*/
#define TCL_LINK_INT 1
#define TCL_LINK_DOUBLE 2
#define TCL_LINK_BOOLEAN 3
#define TCL_LINK_STRING 4
#define TCL_LINK_WIDE_INT 5
#define TCL_LINK_CHAR 6
#define TCL_LINK_UCHAR 7
#define TCL_LINK_SHORT 8
#define TCL_LINK_USHORT 9
#define TCL_LINK_UINT 10
#define TCL_LINK_LONG 11
#define TCL_LINK_ULONG 12
#define TCL_LINK_FLOAT 13
#define TCL_LINK_WIDE_UINT 14
#define TCL_LINK_READ_ONLY 0x80
/*
*----------------------------------------------------------------------------
* Forward declarations of Tcl_HashTable and related types.
*/
typedef struct Tcl_HashKeyType Tcl_HashKeyType;
typedef struct Tcl_HashTable Tcl_HashTable;
typedef struct Tcl_HashEntry Tcl_HashEntry;
typedef unsigned (Tcl_HashKeyProc) (Tcl_HashTable *tablePtr, void *keyPtr);
typedef int (Tcl_CompareHashKeysProc) (void *keyPtr, Tcl_HashEntry *hPtr);
typedef Tcl_HashEntry * (Tcl_AllocHashEntryProc) (Tcl_HashTable *tablePtr,
void *keyPtr);
typedef void (Tcl_FreeHashEntryProc) (Tcl_HashEntry *hPtr);
/*
* This flag controls whether the hash table stores the hash of a key, or
* recalculates it. There should be no reason for turning this flag off as it
* is completely binary and source compatible unless you directly access the
* bucketPtr member of the Tcl_HashTableEntry structure. This member has been
* removed and the space used to store the hash value.
*/
#ifndef TCL_HASH_KEY_STORE_HASH
# define TCL_HASH_KEY_STORE_HASH 1
#endif
/*
* Structure definition for an entry in a hash table. No-one outside Tcl
* should access any of these fields directly; use the macros defined below.
*/
struct Tcl_HashEntry {
Tcl_HashEntry *nextPtr; /* Pointer to next entry in this hash bucket,
* or NULL for end of chain. */
Tcl_HashTable *tablePtr; /* Pointer to table containing entry. */
#if TCL_HASH_KEY_STORE_HASH
void *hash; /* Hash value, stored as pointer to ensure
* that the offsets of the fields in this
* structure are not changed. */
#else
Tcl_HashEntry **bucketPtr; /* Pointer to bucket that points to first
* entry in this entry's chain: used for
* deleting the entry. */
#endif
ClientData clientData; /* Application stores something here with
* Tcl_SetHashValue. */
union { /* Key has one of these forms: */
char *oneWordValue; /* One-word value for key. */
Tcl_Obj *objPtr; /* Tcl_Obj * key value. */
int words[1]; /* Multiple integer words for key. The actual
* size will be as large as necessary for this
* table's keys. */
char string[1]; /* String for key. The actual size will be as
* large as needed to hold the key. */
} key; /* MUST BE LAST FIELD IN RECORD!! */
};
/*
* Flags used in Tcl_HashKeyType.
*
* TCL_HASH_KEY_RANDOMIZE_HASH -
* There are some things, pointers for example
* which don't hash well because they do not use
* the lower bits. If this flag is set then the
* hash table will attempt to rectify this by
* randomising the bits and then using the upper
* N bits as the index into the table.
* TCL_HASH_KEY_SYSTEM_HASH - If this flag is set then all memory internally
* allocated for the hash table that is not for an
* entry will use the system heap.
*/
#define TCL_HASH_KEY_RANDOMIZE_HASH 0x1
#define TCL_HASH_KEY_SYSTEM_HASH 0x2
/*
* Structure definition for the methods associated with a hash table key type.
*/
#define TCL_HASH_KEY_TYPE_VERSION 1
struct Tcl_HashKeyType {
int version; /* Version of the table. If this structure is
* extended in future then the version can be
* used to distinguish between different
* structures. */
int flags; /* Flags, see above for details. */
Tcl_HashKeyProc *hashKeyProc;
/* Calculates a hash value for the key. If
* this is NULL then the pointer itself is
* used as a hash value. */
Tcl_CompareHashKeysProc *compareKeysProc;
/* Compares two keys and returns zero if they
* do not match, and non-zero if they do. If
* this is NULL then the pointers are
* compared. */
Tcl_AllocHashEntryProc *allocEntryProc;
/* Called to allocate memory for a new entry,
* i.e. if the key is a string then this could
* allocate a single block which contains
* enough space for both the entry and the
* string. Only the key field of the allocated
* Tcl_HashEntry structure needs to be filled
* in. If something else needs to be done to
* the key, i.e. incrementing a reference
* count then that should be done by this
* function. If this is NULL then Tcl_Alloc is
* used to allocate enough space for a
* Tcl_HashEntry and the key pointer is
* assigned to key.oneWordValue. */
Tcl_FreeHashEntryProc *freeEntryProc;
/* Called to free memory associated with an
* entry. If something else needs to be done
* to the key, i.e. decrementing a reference
* count then that should be done by this
* function. If this is NULL then Tcl_Free is
* used to free the Tcl_HashEntry. */
};
/*
* Structure definition for a hash table. Must be in tcl.h so clients can
* allocate space for these structures, but clients should never access any
* fields in this structure.
*/
#define TCL_SMALL_HASH_TABLE 4
struct Tcl_HashTable {
Tcl_HashEntry **buckets; /* Pointer to bucket array. Each element
* points to first entry in bucket's hash
* chain, or NULL. */
Tcl_HashEntry *staticBuckets[TCL_SMALL_HASH_TABLE];
/* Bucket array used for small tables (to
* avoid mallocs and frees). */
int numBuckets; /* Total number of buckets allocated at
* **bucketPtr. */
int numEntries; /* Total number of entries present in
* table. */
int rebuildSize; /* Enlarge table when numEntries gets to be
* this large. */
int downShift; /* Shift count used in hashing function.
* Designed to use high-order bits of
* randomized keys. */
int mask; /* Mask value used in hashing function. */
int keyType; /* Type of keys used in this table. It's
* either TCL_CUSTOM_KEYS, TCL_STRING_KEYS,
* TCL_ONE_WORD_KEYS, or an integer giving the
* number of ints that is the size of the
* key. */
Tcl_HashEntry *(*findProc) (Tcl_HashTable *tablePtr, const char *key);
Tcl_HashEntry *(*createProc) (Tcl_HashTable *tablePtr, const char *key,
int *newPtr);
const Tcl_HashKeyType *typePtr;
/* Type of the keys used in the
* Tcl_HashTable. */
};
/*
* Structure definition for information used to keep track of searches through
* hash tables:
*/
typedef struct Tcl_HashSearch {
Tcl_HashTable *tablePtr; /* Table being searched. */
int nextIndex; /* Index of next bucket to be enumerated after
* present one. */
Tcl_HashEntry *nextEntryPtr;/* Next entry to be enumerated in the current
* bucket. */
} Tcl_HashSearch;
/*
* Acceptable key types for hash tables:
*
* TCL_STRING_KEYS: The keys are strings, they are copied into the
* entry.
* TCL_ONE_WORD_KEYS: The keys are pointers, the pointer is stored
* in the entry.
* TCL_CUSTOM_TYPE_KEYS: The keys are arbitrary types which are copied
* into the entry.
* TCL_CUSTOM_PTR_KEYS: The keys are pointers to arbitrary types, the
* pointer is stored in the entry.
*
* While maintaining binary compatibility the above have to be distinct values
* as they are used to differentiate between old versions of the hash table
* which don't have a typePtr and new ones which do. Once binary compatibility
* is discarded in favour of making more wide spread changes TCL_STRING_KEYS
* can be the same as TCL_CUSTOM_TYPE_KEYS, and TCL_ONE_WORD_KEYS can be the
* same as TCL_CUSTOM_PTR_KEYS because they simply determine how the key is
* accessed from the entry and not the behaviour.
*/
#define TCL_STRING_KEYS (0)
#define TCL_ONE_WORD_KEYS (1)
#define TCL_CUSTOM_TYPE_KEYS (-2)
#define TCL_CUSTOM_PTR_KEYS (-1)
/*
* Structure definition for information used to keep track of searches through
* dictionaries. These fields should not be accessed by code outside
* tclDictObj.c
*/
typedef struct {
void *next; /* Search position for underlying hash
* table. */
int epoch; /* Epoch marker for dictionary being searched,
* or -1 if search has terminated. */
Tcl_Dict dictionaryPtr; /* Reference to dictionary being searched. */
} Tcl_DictSearch;
/*
*----------------------------------------------------------------------------
* Flag values to pass to Tcl_DoOneEvent to disable searches for some kinds of
* events:
*/
#define TCL_DONT_WAIT (1<<1)
#define TCL_WINDOW_EVENTS (1<<2)
#define TCL_FILE_EVENTS (1<<3)
#define TCL_TIMER_EVENTS (1<<4)
#define TCL_IDLE_EVENTS (1<<5) /* WAS 0x10 ???? */
#define TCL_ALL_EVENTS (~TCL_DONT_WAIT)
/*
* The following structure defines a generic event for the Tcl event system.
* These are the things that are queued in calls to Tcl_QueueEvent and
* serviced later by Tcl_DoOneEvent. There can be many different kinds of
* events with different fields, corresponding to window events, timer events,
* etc. The structure for a particular event consists of a Tcl_Event header
* followed by additional information specific to that event.
*/
struct Tcl_Event {
Tcl_EventProc *proc; /* Function to call to service this event. */
struct Tcl_Event *nextPtr; /* Next in list of pending events, or NULL. */
};
/*
* Positions to pass to Tcl_QueueEvent:
*/
typedef enum {
TCL_QUEUE_TAIL, TCL_QUEUE_HEAD, TCL_QUEUE_MARK
} Tcl_QueuePosition;
/*
* Values to pass to Tcl_SetServiceMode to specify the behavior of notifier
* event routines.
*/
#define TCL_SERVICE_NONE 0
#define TCL_SERVICE_ALL 1
/*
* The following structure keeps is used to hold a time value, either as an
* absolute time (the number of seconds from the epoch) or as an elapsed time.
* On Unix systems the epoch is Midnight Jan 1, 1970 GMT.
*/
typedef struct Tcl_Time {
long sec; /* Seconds. */
long usec; /* Microseconds. */
} Tcl_Time;
typedef void (Tcl_SetTimerProc) (CONST86 Tcl_Time *timePtr);
typedef int (Tcl_WaitForEventProc) (CONST86 Tcl_Time *timePtr);
/*
* TIP #233 (Virtualized Time)
*/
typedef void (Tcl_GetTimeProc) (Tcl_Time *timebuf, ClientData clientData);
typedef void (Tcl_ScaleTimeProc) (Tcl_Time *timebuf, ClientData clientData);
/*
*----------------------------------------------------------------------------
* Bits to pass to Tcl_CreateFileHandler and Tcl_CreateChannelHandler to
* indicate what sorts of events are of interest:
*/
#define TCL_READABLE (1<<1)
#define TCL_WRITABLE (1<<2)
#define TCL_EXCEPTION (1<<3)
/*
* Flag values to pass to Tcl_OpenCommandChannel to indicate the disposition
* of the stdio handles. TCL_STDIN, TCL_STDOUT, TCL_STDERR, are also used in
* Tcl_GetStdChannel.
*/
#define TCL_STDIN (1<<1)
#define TCL_STDOUT (1<<2)
#define TCL_STDERR (1<<3)
#define TCL_ENFORCE_MODE (1<<4)
/*
* Bits passed to Tcl_DriverClose2Proc to indicate which side of a channel
* should be closed.
*/
#define TCL_CLOSE_READ (1<<1)
#define TCL_CLOSE_WRITE (1<<2)
/*
* Value to use as the closeProc for a channel that supports the close2Proc
* interface.
*/
#define TCL_CLOSE2PROC ((Tcl_DriverCloseProc *) 1)
/*
* Channel version tag. This was introduced in 8.3.2/8.4.
*/
#define TCL_CHANNEL_VERSION_1 ((Tcl_ChannelTypeVersion) 0x1)
#define TCL_CHANNEL_VERSION_2 ((Tcl_ChannelTypeVersion) 0x2)
#define TCL_CHANNEL_VERSION_3 ((Tcl_ChannelTypeVersion) 0x3)
#define TCL_CHANNEL_VERSION_4 ((Tcl_ChannelTypeVersion) 0x4)
#define TCL_CHANNEL_VERSION_5 ((Tcl_ChannelTypeVersion) 0x5)
/*
* TIP #218: Channel Actions, Ids for Tcl_DriverThreadActionProc.
*/
#define TCL_CHANNEL_THREAD_INSERT (0)
#define TCL_CHANNEL_THREAD_REMOVE (1)
/*
* Typedefs for the various operations in a channel type:
*/
typedef int (Tcl_DriverBlockModeProc) (ClientData instanceData, int mode);
typedef int (Tcl_DriverCloseProc) (ClientData instanceData,
Tcl_Interp *interp);
typedef int (Tcl_DriverClose2Proc) (ClientData instanceData,
Tcl_Interp *interp, int flags);
typedef int (Tcl_DriverInputProc) (ClientData instanceData, char *buf,
int toRead, int *errorCodePtr);
typedef int (Tcl_DriverOutputProc) (ClientData instanceData,
CONST84 char *buf, int toWrite, int *errorCodePtr);
typedef int (Tcl_DriverSeekProc) (ClientData instanceData, long offset,
int mode, int *errorCodePtr);
typedef int (Tcl_DriverSetOptionProc) (ClientData instanceData,
Tcl_Interp *interp, const char *optionName,
const char *value);
typedef int (Tcl_DriverGetOptionProc) (ClientData instanceData,
Tcl_Interp *interp, CONST84 char *optionName,
Tcl_DString *dsPtr);
typedef void (Tcl_DriverWatchProc) (ClientData instanceData, int mask);
typedef int (Tcl_DriverGetHandleProc) (ClientData instanceData,
int direction, ClientData *handlePtr);
typedef int (Tcl_DriverFlushProc) (ClientData instanceData);
typedef int (Tcl_DriverHandlerProc) (ClientData instanceData,
int interestMask);
typedef Tcl_WideInt (Tcl_DriverWideSeekProc) (ClientData instanceData,
Tcl_WideInt offset, int mode, int *errorCodePtr);
/*
* TIP #218, Channel Thread Actions
*/
typedef void (Tcl_DriverThreadActionProc) (ClientData instanceData,
int action);
/*
* TIP #208, File Truncation (etc.)
*/
typedef int (Tcl_DriverTruncateProc) (ClientData instanceData,
Tcl_WideInt length);
/*
* struct Tcl_ChannelType:
*
* One such structure exists for each type (kind) of channel. It collects
* together in one place all the functions that are part of the specific
* channel type.
*
* It is recommend that the Tcl_Channel* functions are used to access elements
* of this structure, instead of direct accessing.
*/
typedef struct Tcl_ChannelType {
const char *typeName; /* The name of the channel type in Tcl
* commands. This storage is owned by channel
* type. */
Tcl_ChannelTypeVersion version;
/* Version of the channel type. */
Tcl_DriverCloseProc *closeProc;
/* Function to call to close the channel, or
* TCL_CLOSE2PROC if the close2Proc should be
* used instead. */
Tcl_DriverInputProc *inputProc;
/* Function to call for input on channel. */
Tcl_DriverOutputProc *outputProc;
/* Function to call for output on channel. */
Tcl_DriverSeekProc *seekProc;
/* Function to call to seek on the channel.
* May be NULL. */
Tcl_DriverSetOptionProc *setOptionProc;
/* Set an option on a channel. */
Tcl_DriverGetOptionProc *getOptionProc;
/* Get an option from a channel. */
Tcl_DriverWatchProc *watchProc;
/* Set up the notifier to watch for events on
* this channel. */
Tcl_DriverGetHandleProc *getHandleProc;
/* Get an OS handle from the channel or NULL
* if not supported. */
Tcl_DriverClose2Proc *close2Proc;
/* Function to call to close the channel if
* the device supports closing the read &
* write sides independently. */
Tcl_DriverBlockModeProc *blockModeProc;
/* Set blocking mode for the raw channel. May
* be NULL. */
/*
* Only valid in TCL_CHANNEL_VERSION_2 channels or later.
*/
Tcl_DriverFlushProc *flushProc;
/* Function to call to flush a channel. May be
* NULL. */
Tcl_DriverHandlerProc *handlerProc;
/* Function to call to handle a channel event.
* This will be passed up the stacked channel
* chain. */
/*
* Only valid in TCL_CHANNEL_VERSION_3 channels or later.
*/
Tcl_DriverWideSeekProc *wideSeekProc;
/* Function to call to seek on the channel
* which can handle 64-bit offsets. May be
* NULL, and must be NULL if seekProc is
* NULL. */
/*
* Only valid in TCL_CHANNEL_VERSION_4 channels or later.
* TIP #218, Channel Thread Actions.
*/
Tcl_DriverThreadActionProc *threadActionProc;
/* Function to call to notify the driver of
* thread specific activity for a channel. May
* be NULL. */
/*
* Only valid in TCL_CHANNEL_VERSION_5 channels or later.
* TIP #208, File Truncation.
*/
Tcl_DriverTruncateProc *truncateProc;
/* Function to call to truncate the underlying
* file to a particular length. May be NULL if
* the channel does not support truncation. */
} Tcl_ChannelType;
/*
* The following flags determine whether the blockModeProc above should set
* the channel into blocking or nonblocking mode. They are passed as arguments
* to the blockModeProc function in the above structure.
*/
#define TCL_MODE_BLOCKING 0 /* Put channel into blocking mode. */
#define TCL_MODE_NONBLOCKING 1 /* Put channel into nonblocking
* mode. */
/*
*----------------------------------------------------------------------------
* Enum for different types of file paths.
*/
typedef enum Tcl_PathType {
TCL_PATH_ABSOLUTE,
TCL_PATH_RELATIVE,
TCL_PATH_VOLUME_RELATIVE
} Tcl_PathType;
/*
* The following structure is used to pass glob type data amongst the various
* glob routines and Tcl_FSMatchInDirectory.
*/
typedef struct Tcl_GlobTypeData {
int type; /* Corresponds to bcdpfls as in 'find -t'. */
int perm; /* Corresponds to file permissions. */
Tcl_Obj *macType; /* Acceptable Mac type. */
Tcl_Obj *macCreator; /* Acceptable Mac creator. */
} Tcl_GlobTypeData;
/*
* Type and permission definitions for glob command.
*/
#define TCL_GLOB_TYPE_BLOCK (1<<0)
#define TCL_GLOB_TYPE_CHAR (1<<1)
#define TCL_GLOB_TYPE_DIR (1<<2)
#define TCL_GLOB_TYPE_PIPE (1<<3)
#define TCL_GLOB_TYPE_FILE (1<<4)
#define TCL_GLOB_TYPE_LINK (1<<5)
#define TCL_GLOB_TYPE_SOCK (1<<6)
#define TCL_GLOB_TYPE_MOUNT (1<<7)
#define TCL_GLOB_PERM_RONLY (1<<0)
#define TCL_GLOB_PERM_HIDDEN (1<<1)
#define TCL_GLOB_PERM_R (1<<2)
#define TCL_GLOB_PERM_W (1<<3)
#define TCL_GLOB_PERM_X (1<<4)
/*
* Flags for the unload callback function.
*/
#define TCL_UNLOAD_DETACH_FROM_INTERPRETER (1<<0)
#define TCL_UNLOAD_DETACH_FROM_PROCESS (1<<1)
/*
* Typedefs for the various filesystem operations:
*/
typedef int (Tcl_FSStatProc) (Tcl_Obj *pathPtr, Tcl_StatBuf *buf);
typedef int (Tcl_FSAccessProc) (Tcl_Obj *pathPtr, int mode);
typedef Tcl_Channel (Tcl_FSOpenFileChannelProc) (Tcl_Interp *interp,
Tcl_Obj *pathPtr, int mode, int permissions);
typedef int (Tcl_FSMatchInDirectoryProc) (Tcl_Interp *interp, Tcl_Obj *result,
Tcl_Obj *pathPtr, const char *pattern, Tcl_GlobTypeData *types);
typedef Tcl_Obj * (Tcl_FSGetCwdProc) (Tcl_Interp *interp);
typedef int (Tcl_FSChdirProc) (Tcl_Obj *pathPtr);
typedef int (Tcl_FSLstatProc) (Tcl_Obj *pathPtr, Tcl_StatBuf *buf);
typedef int (Tcl_FSCreateDirectoryProc) (Tcl_Obj *pathPtr);
typedef int (Tcl_FSDeleteFileProc) (Tcl_Obj *pathPtr);
typedef int (Tcl_FSCopyDirectoryProc) (Tcl_Obj *srcPathPtr,
Tcl_Obj *destPathPtr, Tcl_Obj **errorPtr);
typedef int (Tcl_FSCopyFileProc) (Tcl_Obj *srcPathPtr, Tcl_Obj *destPathPtr);
typedef int (Tcl_FSRemoveDirectoryProc) (Tcl_Obj *pathPtr, int recursive,
Tcl_Obj **errorPtr);
typedef int (Tcl_FSRenameFileProc) (Tcl_Obj *srcPathPtr, Tcl_Obj *destPathPtr);
typedef void (Tcl_FSUnloadFileProc) (Tcl_LoadHandle loadHandle);
typedef Tcl_Obj * (Tcl_FSListVolumesProc) (void);
/* We have to declare the utime structure here. */
struct utimbuf;
typedef int (Tcl_FSUtimeProc) (Tcl_Obj *pathPtr, struct utimbuf *tval);
typedef int (Tcl_FSNormalizePathProc) (Tcl_Interp *interp, Tcl_Obj *pathPtr,
int nextCheckpoint);
typedef int (Tcl_FSFileAttrsGetProc) (Tcl_Interp *interp, int index,
Tcl_Obj *pathPtr, Tcl_Obj **objPtrRef);
typedef const char *CONST86 * (Tcl_FSFileAttrStringsProc) (Tcl_Obj *pathPtr,
Tcl_Obj **objPtrRef);
typedef int (Tcl_FSFileAttrsSetProc) (Tcl_Interp *interp, int index,
Tcl_Obj *pathPtr, Tcl_Obj *objPtr);
typedef Tcl_Obj * (Tcl_FSLinkProc) (Tcl_Obj *pathPtr, Tcl_Obj *toPtr,
int linkType);
typedef int (Tcl_FSLoadFileProc) (Tcl_Interp *interp, Tcl_Obj *pathPtr,
Tcl_LoadHandle *handlePtr, Tcl_FSUnloadFileProc **unloadProcPtr);
typedef int (Tcl_FSPathInFilesystemProc) (Tcl_Obj *pathPtr,
ClientData *clientDataPtr);
typedef Tcl_Obj * (Tcl_FSFilesystemPathTypeProc) (Tcl_Obj *pathPtr);
typedef Tcl_Obj * (Tcl_FSFilesystemSeparatorProc) (Tcl_Obj *pathPtr);
typedef void (Tcl_FSFreeInternalRepProc) (ClientData clientData);
typedef ClientData (Tcl_FSDupInternalRepProc) (ClientData clientData);
typedef Tcl_Obj * (Tcl_FSInternalToNormalizedProc) (ClientData clientData);
typedef ClientData (Tcl_FSCreateInternalRepProc) (Tcl_Obj *pathPtr);
typedef struct Tcl_FSVersion_ *Tcl_FSVersion;
/*
*----------------------------------------------------------------------------
* Data structures related to hooking into the filesystem
*/
/*
* Filesystem version tag. This was introduced in 8.4.
*/
#define TCL_FILESYSTEM_VERSION_1 ((Tcl_FSVersion) 0x1)
/*
* struct Tcl_Filesystem:
*
* One such structure exists for each type (kind) of filesystem. It collects
* together in one place all the functions that are part of the specific
* filesystem. Tcl always accesses the filesystem through one of these
* structures.
*
* Not all entries need be non-NULL; any which are NULL are simply ignored.
* However, a complete filesystem should provide all of these functions. The
* explanations in the structure show the importance of each function.
*/
typedef struct Tcl_Filesystem {
const char *typeName; /* The name of the filesystem. */
int structureLength; /* Length of this structure, so future binary
* compatibility can be assured. */
Tcl_FSVersion version; /* Version of the filesystem type. */
Tcl_FSPathInFilesystemProc *pathInFilesystemProc;
/* Function to check whether a path is in this
* filesystem. This is the most important
* filesystem function. */
Tcl_FSDupInternalRepProc *dupInternalRepProc;
/* Function to duplicate internal fs rep. May
* be NULL (but then fs is less efficient). */
Tcl_FSFreeInternalRepProc *freeInternalRepProc;
/* Function to free internal fs rep. Must be
* implemented if internal representations
* need freeing, otherwise it can be NULL. */
Tcl_FSInternalToNormalizedProc *internalToNormalizedProc;
/* Function to convert internal representation
* to a normalized path. Only required if the
* fs creates pure path objects with no
* string/path representation. */
Tcl_FSCreateInternalRepProc *createInternalRepProc;
/* Function to create a filesystem-specific
* internal representation. May be NULL if
* paths have no internal representation, or
* if the Tcl_FSPathInFilesystemProc for this
* filesystem always immediately creates an
* internal representation for paths it
* accepts. */
Tcl_FSNormalizePathProc *normalizePathProc;
/* Function to normalize a path. Should be
* implemented for all filesystems which can
* have multiple string representations for
* the same path object. */
Tcl_FSFilesystemPathTypeProc *filesystemPathTypeProc;
/* Function to determine the type of a path in
* this filesystem. May be NULL. */
Tcl_FSFilesystemSeparatorProc *filesystemSeparatorProc;
/* Function to return the separator
* character(s) for this filesystem. Must be
* implemented. */
Tcl_FSStatProc *statProc; /* Function to process a 'Tcl_FSStat()' call.
* Must be implemented for any reasonable
* filesystem. */
Tcl_FSAccessProc *accessProc;
/* Function to process a 'Tcl_FSAccess()'
* call. Must be implemented for any
* reasonable filesystem. */
Tcl_FSOpenFileChannelProc *openFileChannelProc;
/* Function to process a
* 'Tcl_FSOpenFileChannel()' call. Must be
* implemented for any reasonable
* filesystem. */
Tcl_FSMatchInDirectoryProc *matchInDirectoryProc;
/* Function to process a
* 'Tcl_FSMatchInDirectory()'. If not
* implemented, then glob and recursive copy
* functionality will be lacking in the
* filesystem. */
Tcl_FSUtimeProc *utimeProc; /* Function to process a 'Tcl_FSUtime()' call.
* Required to allow setting (not reading) of
* times with 'file mtime', 'file atime' and
* the open-r/open-w/fcopy implementation of
* 'file copy'. */
Tcl_FSLinkProc *linkProc; /* Function to process a 'Tcl_FSLink()' call.
* Should be implemented only if the
* filesystem supports links (reading or
* creating). */
Tcl_FSListVolumesProc *listVolumesProc;
/* Function to list any filesystem volumes
* added by this filesystem. Should be
* implemented only if the filesystem adds
* volumes at the head of the filesystem. */
Tcl_FSFileAttrStringsProc *fileAttrStringsProc;
/* Function to list all attributes strings
* which are valid for this filesystem. If not
* implemented the filesystem will not support
* the 'file attributes' command. This allows
* arbitrary additional information to be
* attached to files in the filesystem. */
Tcl_FSFileAttrsGetProc *fileAttrsGetProc;
/* Function to process a
* 'Tcl_FSFileAttrsGet()' call, used by 'file
* attributes'. */
Tcl_FSFileAttrsSetProc *fileAttrsSetProc;
/* Function to process a
* 'Tcl_FSFileAttrsSet()' call, used by 'file
* attributes'. */
Tcl_FSCreateDirectoryProc *createDirectoryProc;
/* Function to process a
* 'Tcl_FSCreateDirectory()' call. Should be
* implemented unless the FS is read-only. */
Tcl_FSRemoveDirectoryProc *removeDirectoryProc;
/* Function to process a
* 'Tcl_FSRemoveDirectory()' call. Should be
* implemented unless the FS is read-only. */
Tcl_FSDeleteFileProc *deleteFileProc;
/* Function to process a 'Tcl_FSDeleteFile()'
* call. Should be implemented unless the FS
* is read-only. */
Tcl_FSCopyFileProc *copyFileProc;
/* Function to process a 'Tcl_FSCopyFile()'
* call. If not implemented Tcl will fall back
* on open-r, open-w and fcopy as a copying
* mechanism, for copying actions initiated in
* Tcl (not C). */
Tcl_FSRenameFileProc *renameFileProc;
/* Function to process a 'Tcl_FSRenameFile()'
* call. If not implemented, Tcl will fall
* back on a copy and delete mechanism, for
* rename actions initiated in Tcl (not C). */
Tcl_FSCopyDirectoryProc *copyDirectoryProc;
/* Function to process a
* 'Tcl_FSCopyDirectory()' call. If not
* implemented, Tcl will fall back on a
* recursive create-dir, file copy mechanism,
* for copying actions initiated in Tcl (not
* C). */
Tcl_FSLstatProc *lstatProc; /* Function to process a 'Tcl_FSLstat()' call.
* If not implemented, Tcl will attempt to use
* the 'statProc' defined above instead. */
Tcl_FSLoadFileProc *loadFileProc;
/* Function to process a 'Tcl_FSLoadFile()'
* call. If not implemented, Tcl will fall
* back on a copy to native-temp followed by a
* Tcl_FSLoadFile on that temporary copy. */
Tcl_FSGetCwdProc *getCwdProc;
/* Function to process a 'Tcl_FSGetCwd()'
* call. Most filesystems need not implement
* this. It will usually only be called once,
* if 'getcwd' is called before 'chdir'. May
* be NULL. */
Tcl_FSChdirProc *chdirProc; /* Function to process a 'Tcl_FSChdir()' call.
* If filesystems do not implement this, it
* will be emulated by a series of directory
* access checks. Otherwise, virtual
* filesystems which do implement it need only
* respond with a positive return result if
* the dirName is a valid directory in their
* filesystem. They need not remember the
* result, since that will be automatically
* remembered for use by GetCwd. Real
* filesystems should carry out the correct
* action (i.e. call the correct system
* 'chdir' api). If not implemented, then 'cd'
* and 'pwd' will fail inside the
* filesystem. */
} Tcl_Filesystem;
/*
* The following definitions are used as values for the 'linkAction' flag to
* Tcl_FSLink, or the linkProc of any filesystem. Any combination of flags can
* be given. For link creation, the linkProc should create a link which
* matches any of the types given.
*
* TCL_CREATE_SYMBOLIC_LINK - Create a symbolic or soft link.
* TCL_CREATE_HARD_LINK - Create a hard link.
*/
#define TCL_CREATE_SYMBOLIC_LINK 0x01
#define TCL_CREATE_HARD_LINK 0x02
/*
*----------------------------------------------------------------------------
* The following structure represents the Notifier functions that you can
* override with the Tcl_SetNotifier call.
*/
typedef struct Tcl_NotifierProcs {
Tcl_SetTimerProc *setTimerProc;
Tcl_WaitForEventProc *waitForEventProc;
Tcl_CreateFileHandlerProc *createFileHandlerProc;
Tcl_DeleteFileHandlerProc *deleteFileHandlerProc;
Tcl_InitNotifierProc *initNotifierProc;
Tcl_FinalizeNotifierProc *finalizeNotifierProc;
Tcl_AlertNotifierProc *alertNotifierProc;
Tcl_ServiceModeHookProc *serviceModeHookProc;
} Tcl_NotifierProcs;
/*
*----------------------------------------------------------------------------
* The following data structures and declarations are for the new Tcl parser.
*
* For each word of a command, and for each piece of a word such as a variable
* reference, one of the following structures is created to describe the
* token.
*/
typedef struct Tcl_Token {
int type; /* Type of token, such as TCL_TOKEN_WORD; see
* below for valid types. */
const char *start; /* First character in token. */
int size; /* Number of bytes in token. */
int numComponents; /* If this token is composed of other tokens,
* this field tells how many of them there are
* (including components of components, etc.).
* The component tokens immediately follow
* this one. */
} Tcl_Token;
/*
* Type values defined for Tcl_Token structures. These values are defined as
* mask bits so that it's easy to check for collections of types.
*
* TCL_TOKEN_WORD - The token describes one word of a command,
* from the first non-blank character of the word
* (which may be " or {) up to but not including
* the space, semicolon, or bracket that
* terminates the word. NumComponents counts the
* total number of sub-tokens that make up the
* word. This includes, for example, sub-tokens
* of TCL_TOKEN_VARIABLE tokens.
* TCL_TOKEN_SIMPLE_WORD - This token is just like TCL_TOKEN_WORD except
* that the word is guaranteed to consist of a
* single TCL_TOKEN_TEXT sub-token.
* TCL_TOKEN_TEXT - The token describes a range of literal text
* that is part of a word. NumComponents is
* always 0.
* TCL_TOKEN_BS - The token describes a backslash sequence that
* must be collapsed. NumComponents is always 0.
* TCL_TOKEN_COMMAND - The token describes a command whose result
* must be substituted into the word. The token
* includes the enclosing brackets. NumComponents
* is always 0.
* TCL_TOKEN_VARIABLE - The token describes a variable substitution,
* including the dollar sign, variable name, and
* array index (if there is one) up through the
* right parentheses. NumComponents tells how
* many additional tokens follow to represent the
* variable name. The first token will be a
* TCL_TOKEN_TEXT token that describes the
* variable name. If the variable is an array
* reference then there will be one or more
* additional tokens, of type TCL_TOKEN_TEXT,
* TCL_TOKEN_BS, TCL_TOKEN_COMMAND, and
* TCL_TOKEN_VARIABLE, that describe the array
* index; numComponents counts the total number
* of nested tokens that make up the variable
* reference, including sub-tokens of
* TCL_TOKEN_VARIABLE tokens.
* TCL_TOKEN_SUB_EXPR - The token describes one subexpression of an
* expression, from the first non-blank character
* of the subexpression up to but not including
* the space, brace, or bracket that terminates
* the subexpression. NumComponents counts the
* total number of following subtokens that make
* up the subexpression; this includes all
* subtokens for any nested TCL_TOKEN_SUB_EXPR
* tokens. For example, a numeric value used as a
* primitive operand is described by a
* TCL_TOKEN_SUB_EXPR token followed by a
* TCL_TOKEN_TEXT token. A binary subexpression
* is described by a TCL_TOKEN_SUB_EXPR token
* followed by the TCL_TOKEN_OPERATOR token for
* the operator, then TCL_TOKEN_SUB_EXPR tokens
* for the left then the right operands.
* TCL_TOKEN_OPERATOR - The token describes one expression operator.
* An operator might be the name of a math
* function such as "abs". A TCL_TOKEN_OPERATOR
* token is always preceeded by one
* TCL_TOKEN_SUB_EXPR token for the operator's
* subexpression, and is followed by zero or more
* TCL_TOKEN_SUB_EXPR tokens for the operator's
* operands. NumComponents is always 0.
* TCL_TOKEN_EXPAND_WORD - This token is just like TCL_TOKEN_WORD except
* that it marks a word that began with the
* literal character prefix "{*}". This word is
* marked to be expanded - that is, broken into
* words after substitution is complete.
*/
#define TCL_TOKEN_WORD 1
#define TCL_TOKEN_SIMPLE_WORD 2
#define TCL_TOKEN_TEXT 4
#define TCL_TOKEN_BS 8
#define TCL_TOKEN_COMMAND 16
#define TCL_TOKEN_VARIABLE 32
#define TCL_TOKEN_SUB_EXPR 64
#define TCL_TOKEN_OPERATOR 128
#define TCL_TOKEN_EXPAND_WORD 256
/*
* Parsing error types. On any parsing error, one of these values will be
* stored in the error field of the Tcl_Parse structure defined below.
*/
#define TCL_PARSE_SUCCESS 0
#define TCL_PARSE_QUOTE_EXTRA 1
#define TCL_PARSE_BRACE_EXTRA 2
#define TCL_PARSE_MISSING_BRACE 3
#define TCL_PARSE_MISSING_BRACKET 4
#define TCL_PARSE_MISSING_PAREN 5
#define TCL_PARSE_MISSING_QUOTE 6
#define TCL_PARSE_MISSING_VAR_BRACE 7
#define TCL_PARSE_SYNTAX 8
#define TCL_PARSE_BAD_NUMBER 9
/*
* A structure of the following type is filled in by Tcl_ParseCommand. It
* describes a single command parsed from an input string.
*/
#define NUM_STATIC_TOKENS 20
typedef struct Tcl_Parse {
const char *commentStart; /* Pointer to # that begins the first of one
* or more comments preceding the command. */
int commentSize; /* Number of bytes in comments (up through
* newline character that terminates the last
* comment). If there were no comments, this
* field is 0. */
const char *commandStart; /* First character in first word of
* command. */
int commandSize; /* Number of bytes in command, including first
* character of first word, up through the
* terminating newline, close bracket, or
* semicolon. */
int numWords; /* Total number of words in command. May be
* 0. */
Tcl_Token *tokenPtr; /* Pointer to first token representing the
* words of the command. Initially points to
* staticTokens, but may change to point to
* malloc-ed space if command exceeds space in
* staticTokens. */
int numTokens; /* Total number of tokens in command. */
int tokensAvailable; /* Total number of tokens available at
* *tokenPtr. */
int errorType; /* One of the parsing error types defined
* above. */
/*
* The fields below are intended only for the private use of the parser.
* They should not be used by functions that invoke Tcl_ParseCommand.
*/
const char *string; /* The original command string passed to
* Tcl_ParseCommand. */
const char *end; /* Points to the character just after the last
* one in the command string. */
Tcl_Interp *interp; /* Interpreter to use for error reporting, or
* NULL. */
const char *term; /* Points to character in string that
* terminated most recent token. Filled in by
* ParseTokens. If an error occurs, points to
* beginning of region where the error
* occurred (e.g. the open brace if the close
* brace is missing). */
int incomplete; /* This field is set to 1 by Tcl_ParseCommand
* if the command appears to be incomplete.
* This information is used by
* Tcl_CommandComplete. */
Tcl_Token staticTokens[NUM_STATIC_TOKENS];
/* Initial space for tokens for command. This
* space should be large enough to accommodate
* most commands; dynamic space is allocated
* for very large commands that don't fit
* here. */
} Tcl_Parse;
/*
*----------------------------------------------------------------------------
* The following structure represents a user-defined encoding. It collects
* together all the functions that are used by the specific encoding.
*/
typedef struct Tcl_EncodingType {
const char *encodingName; /* The name of the encoding, e.g. "euc-jp".
* This name is the unique key for this
* encoding type. */
Tcl_EncodingConvertProc *toUtfProc;
/* Function to convert from external encoding
* into UTF-8. */
Tcl_EncodingConvertProc *fromUtfProc;
/* Function to convert from UTF-8 into
* external encoding. */
Tcl_EncodingFreeProc *freeProc;
/* If non-NULL, function to call when this
* encoding is deleted. */
ClientData clientData; /* Arbitrary value associated with encoding
* type. Passed to conversion functions. */
int nullSize; /* Number of zero bytes that signify
* end-of-string in this encoding. This number
* is used to determine the source string
* length when the srcLen argument is
* negative. Must be 1 or 2. */
} Tcl_EncodingType;
/*
* The following definitions are used as values for the conversion control
* flags argument when converting text from one character set to another:
*
* TCL_ENCODING_START - Signifies that the source buffer is the first
* block in a (potentially multi-block) input
* stream. Tells the conversion function to reset
* to an initial state and perform any
* initialization that needs to occur before the
* first byte is converted. If the source buffer
* contains the entire input stream to be
* converted, this flag should be set.
* TCL_ENCODING_END - Signifies that the source buffer is the last
* block in a (potentially multi-block) input
* stream. Tells the conversion routine to
* perform any finalization that needs to occur
* after the last byte is converted and then to
* reset to an initial state. If the source
* buffer contains the entire input stream to be
* converted, this flag should be set.
* TCL_ENCODING_STOPONERROR - If set, then the converter will return
* immediately upon encountering an invalid byte
* sequence or a source character that has no
* mapping in the target encoding. If clear, then
* the converter will skip the problem,
* substituting one or more "close" characters in
* the destination buffer and then continue to
* convert the source.
* TCL_ENCODING_NO_TERMINATE - If set, Tcl_ExternalToUtf will not append a
* terminating NUL byte. Knowing that it will
* not need space to do so, it will fill all
* dstLen bytes with encoded UTF-8 content, as
* other circumstances permit. If clear, the
* default behavior is to reserve a byte in
* the dst space for NUL termination, and to
* append the NUL byte.
* TCL_ENCODING_CHAR_LIMIT - If set and dstCharsPtr is not NULL, then
* Tcl_ExternalToUtf takes the initial value
* of *dstCharsPtr is taken as a limit of the
* maximum number of chars to produce in the
* encoded UTF-8 content. Otherwise, the
* number of chars produced is controlled only
* by other limiting factors.
*/
#define TCL_ENCODING_START 0x01
#define TCL_ENCODING_END 0x02
#define TCL_ENCODING_STOPONERROR 0x04
#define TCL_ENCODING_NO_TERMINATE 0x08
#define TCL_ENCODING_CHAR_LIMIT 0x10
/*
* The following definitions are the error codes returned by the conversion
* routines:
*
* TCL_OK - All characters were converted.
* TCL_CONVERT_NOSPACE - The output buffer would not have been large
* enough for all of the converted data; as many
* characters as could fit were converted though.
* TCL_CONVERT_MULTIBYTE - The last few bytes in the source string were
* the beginning of a multibyte sequence, but
* more bytes were needed to complete this
* sequence. A subsequent call to the conversion
* routine should pass the beginning of this
* unconverted sequence plus additional bytes
* from the source stream to properly convert the
* formerly split-up multibyte sequence.
* TCL_CONVERT_SYNTAX - The source stream contained an invalid
* character sequence. This may occur if the
* input stream has been damaged or if the input
* encoding method was misidentified. This error
* is reported only if TCL_ENCODING_STOPONERROR
* was specified.
* TCL_CONVERT_UNKNOWN - The source string contained a character that
* could not be represented in the target
* encoding. This error is reported only if
* TCL_ENCODING_STOPONERROR was specified.
*/
#define TCL_CONVERT_MULTIBYTE (-1)
#define TCL_CONVERT_SYNTAX (-2)
#define TCL_CONVERT_UNKNOWN (-3)
#define TCL_CONVERT_NOSPACE (-4)
/*
* The maximum number of bytes that are necessary to represent a single
* Unicode character in UTF-8. The valid values should be 3, 4 or 6
* (or perhaps 1 if we want to support a non-unicode enabled core). If 3 or
* 4, then Tcl_UniChar must be 2-bytes in size (UCS-2) (the default). If 6,
* then Tcl_UniChar must be 4-bytes in size (UCS-4). At this time UCS-2 mode
* is the default and recommended mode. UCS-4 is experimental and not
* recommended. It works for the core, but most extensions expect UCS-2.
*/
#ifndef TCL_UTF_MAX
#define TCL_UTF_MAX 3
#endif
/*
* This represents a Unicode character. Any changes to this should also be
* reflected in regcustom.h.
*/
#if TCL_UTF_MAX > 4
/*
* unsigned int isn't 100% accurate as it should be a strict 4-byte value
* (perhaps wchar_t). 64-bit systems may have troubles. The size of this
* value must be reflected correctly in regcustom.h and
* in tclEncoding.c.
* XXX: Tcl is currently UCS-2 and planning UTF-16 for the Unicode
* XXX: string rep that Tcl_UniChar represents. Changing the size
* XXX: of Tcl_UniChar is /not/ supported.
*/
typedef unsigned int Tcl_UniChar;
#else
typedef unsigned short Tcl_UniChar;
#endif
/*
*----------------------------------------------------------------------------
* TIP #59: The following structure is used in calls 'Tcl_RegisterConfig' to
* provide the system with the embedded configuration data.
*/
typedef struct Tcl_Config {
const char *key; /* Configuration key to register. ASCII
* encoded, thus UTF-8. */
const char *value; /* The value associated with the key. System
* encoding. */
} Tcl_Config;
/*
*----------------------------------------------------------------------------
* Flags for TIP#143 limits, detailing which limits are active in an
* interpreter. Used for Tcl_{Add,Remove}LimitHandler type argument.
*/
#define TCL_LIMIT_COMMANDS 0x01
#define TCL_LIMIT_TIME 0x02
/*
* Structure containing information about a limit handler to be called when a
* command- or time-limit is exceeded by an interpreter.
*/
typedef void (Tcl_LimitHandlerProc) (ClientData clientData, Tcl_Interp *interp);
typedef void (Tcl_LimitHandlerDeleteProc) (ClientData clientData);
/*
*----------------------------------------------------------------------------
* Override definitions for libtommath.
*/
typedef struct mp_int mp_int;
#define MP_INT_DECLARED
typedef unsigned int mp_digit;
#define MP_DIGIT_DECLARED
/*
*----------------------------------------------------------------------------
* Definitions needed for Tcl_ParseArgvObj routines.
* Based on tkArgv.c.
* Modifications from the original are copyright (c) Sam Bromley 2006
*/
typedef struct {
int type; /* Indicates the option type; see below. */
const char *keyStr; /* The key string that flags the option in the
* argv array. */
void *srcPtr; /* Value to be used in setting dst; usage
* depends on type.*/
void *dstPtr; /* Address of value to be modified; usage
* depends on type.*/
const char *helpStr; /* Documentation message describing this
* option. */
ClientData clientData; /* Word to pass to function callbacks. */
} Tcl_ArgvInfo;
/*
* Legal values for the type field of a Tcl_ArgInfo: see the user
* documentation for details.
*/
#define TCL_ARGV_CONSTANT 15
#define TCL_ARGV_INT 16
#define TCL_ARGV_STRING 17
#define TCL_ARGV_REST 18
#define TCL_ARGV_FLOAT 19
#define TCL_ARGV_FUNC 20
#define TCL_ARGV_GENFUNC 21
#define TCL_ARGV_HELP 22
#define TCL_ARGV_END 23
/*
* Types of callback functions for the TCL_ARGV_FUNC and TCL_ARGV_GENFUNC
* argument types:
*/
typedef int (Tcl_ArgvFuncProc)(ClientData clientData, Tcl_Obj *objPtr,
void *dstPtr);
typedef int (Tcl_ArgvGenFuncProc)(ClientData clientData, Tcl_Interp *interp,
int objc, Tcl_Obj *const *objv, void *dstPtr);
/*
* Shorthand for commonly used argTable entries.
*/
#define TCL_ARGV_AUTO_HELP \
{TCL_ARGV_HELP, "-help", NULL, NULL, \
"Print summary of command-line options and abort", NULL}
#define TCL_ARGV_AUTO_REST \
{TCL_ARGV_REST, "--", NULL, NULL, \
"Marks the end of the options", NULL}
#define TCL_ARGV_TABLE_END \
{TCL_ARGV_END, NULL, NULL, NULL, NULL, NULL}
/*
*----------------------------------------------------------------------------
* Definitions needed for Tcl_Zlib routines. [TIP #234]
*
* Constants for the format flags describing what sort of data format is
* desired/expected for the Tcl_ZlibDeflate, Tcl_ZlibInflate and
* Tcl_ZlibStreamInit functions.
*/
#define TCL_ZLIB_FORMAT_RAW 1
#define TCL_ZLIB_FORMAT_ZLIB 2
#define TCL_ZLIB_FORMAT_GZIP 4
#define TCL_ZLIB_FORMAT_AUTO 8
/*
* Constants that describe whether the stream is to operate in compressing or
* decompressing mode.
*/
#define TCL_ZLIB_STREAM_DEFLATE 16
#define TCL_ZLIB_STREAM_INFLATE 32
/*
* Constants giving compression levels. Use of TCL_ZLIB_COMPRESS_DEFAULT is
* recommended.
*/
#define TCL_ZLIB_COMPRESS_NONE 0
#define TCL_ZLIB_COMPRESS_FAST 1
#define TCL_ZLIB_COMPRESS_BEST 9
#define TCL_ZLIB_COMPRESS_DEFAULT (-1)
/*
* Constants for types of flushing, used with Tcl_ZlibFlush.
*/
#define TCL_ZLIB_NO_FLUSH 0
#define TCL_ZLIB_FLUSH 2
#define TCL_ZLIB_FULLFLUSH 3
#define TCL_ZLIB_FINALIZE 4
/*
*----------------------------------------------------------------------------
* Definitions needed for the Tcl_LoadFile function. [TIP #416]
*/
#define TCL_LOAD_GLOBAL 1
#define TCL_LOAD_LAZY 2
/*
*----------------------------------------------------------------------------
* Single public declaration for NRE.
*/
typedef int (Tcl_NRPostProc) (ClientData data[], Tcl_Interp *interp,
int result);
/*
*----------------------------------------------------------------------------
* The following constant is used to test for older versions of Tcl in the
* stubs tables.
*
* Jan Nijtman's plus patch uses 0xFCA1BACF, so we need to pick a different
* value since the stubs tables don't match.
*/
#define TCL_STUB_MAGIC ((int) 0xFCA3BACF)
/*
* The following function is required to be defined in all stubs aware
* extensions. The function is actually implemented in the stub library, not
* the main Tcl library, although there is a trivial implementation in the
* main library in case an extension is statically linked into an application.
*/
const char * Tcl_InitStubs(Tcl_Interp *interp, const char *version,
int exact);
const char * TclTomMathInitializeStubs(Tcl_Interp *interp,
const char *version, int epoch, int revision);
/*
* When not using stubs, make it a macro.
*/
#ifndef USE_TCL_STUBS
#define Tcl_InitStubs(interp, version, exact) \
Tcl_PkgInitStubsCheck(interp, version, exact)
#endif
/*
* TODO - tommath stubs export goes here!
*/
/*
* Public functions that are not accessible via the stubs table.
* Tcl_GetMemoryInfo is needed for AOLserver. [Bug 1868171]
*/
#define Tcl_Main(argc, argv, proc) Tcl_MainEx(argc, argv, proc, \
((Tcl_CreateInterp)()))
EXTERN void Tcl_MainEx(int argc, char **argv,
Tcl_AppInitProc *appInitProc, Tcl_Interp *interp);
EXTERN const char * Tcl_PkgInitStubsCheck(Tcl_Interp *interp,
const char *version, int exact);
EXTERN void Tcl_GetMemoryInfo(Tcl_DString *dsPtr);
/*
*----------------------------------------------------------------------------
* Include the public function declarations that are accessible via the stubs
* table.
*/
#include "tclDecls.h"
/*
* Include platform specific public function declarations that are accessible
* via the stubs table. Make all TclOO symbols MODULE_SCOPE (which only
* has effect on building it as a shared library). See ticket [3010352].
*/
#if defined(BUILD_tcl)
# undef TCLAPI
# define TCLAPI MODULE_SCOPE
#endif
#include "tclPlatDecls.h"
/*
*----------------------------------------------------------------------------
* The following declarations either map ckalloc and ckfree to malloc and
* free, or they map them to functions with all sorts of debugging hooks
* defined in tclCkalloc.c.
*/
#ifdef TCL_MEM_DEBUG
# define ckalloc(x) \
((void *) Tcl_DbCkalloc((unsigned)(x), __FILE__, __LINE__))
# define ckfree(x) \
Tcl_DbCkfree((char *)(x), __FILE__, __LINE__)
# define ckrealloc(x,y) \
((void *) Tcl_DbCkrealloc((char *)(x), (unsigned)(y), __FILE__, __LINE__))
# define attemptckalloc(x) \
((void *) Tcl_AttemptDbCkalloc((unsigned)(x), __FILE__, __LINE__))
# define attemptckrealloc(x,y) \
((void *) Tcl_AttemptDbCkrealloc((char *)(x), (unsigned)(y), __FILE__, __LINE__))
#else /* !TCL_MEM_DEBUG */
/*
* If we are not using the debugging allocator, we should call the Tcl_Alloc,
* et al. routines in order to guarantee that every module is using the same
* memory allocator both inside and outside of the Tcl library.
*/
# define ckalloc(x) \
((void *) Tcl_Alloc((unsigned)(x)))
# define ckfree(x) \
Tcl_Free((char *)(x))
# define ckrealloc(x,y) \
((void *) Tcl_Realloc((char *)(x), (unsigned)(y)))
# define attemptckalloc(x) \
((void *) Tcl_AttemptAlloc((unsigned)(x)))
# define attemptckrealloc(x,y) \
((void *) Tcl_AttemptRealloc((char *)(x), (unsigned)(y)))
# undef Tcl_InitMemory
# define Tcl_InitMemory(x)
# undef Tcl_DumpActiveMemory
# define Tcl_DumpActiveMemory(x)
# undef Tcl_ValidateAllMemory
# define Tcl_ValidateAllMemory(x,y)
#endif /* !TCL_MEM_DEBUG */
#ifdef TCL_MEM_DEBUG
# define Tcl_IncrRefCount(objPtr) \
Tcl_DbIncrRefCount(objPtr, __FILE__, __LINE__)
# define Tcl_DecrRefCount(objPtr) \
Tcl_DbDecrRefCount(objPtr, __FILE__, __LINE__)
# define Tcl_IsShared(objPtr) \
Tcl_DbIsShared(objPtr, __FILE__, __LINE__)
#else
# define Tcl_IncrRefCount(objPtr) \
++(objPtr)->refCount
/*
* Use do/while0 idiom for optimum correctness without compiler warnings.
* http://c2.com/cgi/wiki?TrivialDoWhileLoop
*/
# define Tcl_DecrRefCount(objPtr) \
do { \
Tcl_Obj *_objPtr = (objPtr); \
if ((_objPtr)->refCount-- <= 1) { \
TclFreeObj(_objPtr); \
} \
} while(0)
# define Tcl_IsShared(objPtr) \
((objPtr)->refCount > 1)
#endif
/*
* Macros and definitions that help to debug the use of Tcl objects. When
* TCL_MEM_DEBUG is defined, the Tcl_New declarations are overridden to call
* debugging versions of the object creation functions.
*/
#ifdef TCL_MEM_DEBUG
# undef Tcl_NewBignumObj
# define Tcl_NewBignumObj(val) \
Tcl_DbNewBignumObj(val, __FILE__, __LINE__)
# undef Tcl_NewBooleanObj
# define Tcl_NewBooleanObj(val) \
Tcl_DbNewBooleanObj(val, __FILE__, __LINE__)
# undef Tcl_NewByteArrayObj
# define Tcl_NewByteArrayObj(bytes, len) \
Tcl_DbNewByteArrayObj(bytes, len, __FILE__, __LINE__)
# undef Tcl_NewDoubleObj
# define Tcl_NewDoubleObj(val) \
Tcl_DbNewDoubleObj(val, __FILE__, __LINE__)
# undef Tcl_NewIntObj
# define Tcl_NewIntObj(val) \
Tcl_DbNewLongObj(val, __FILE__, __LINE__)
# undef Tcl_NewListObj
# define Tcl_NewListObj(objc, objv) \
Tcl_DbNewListObj(objc, objv, __FILE__, __LINE__)
# undef Tcl_NewLongObj
# define Tcl_NewLongObj(val) \
Tcl_DbNewLongObj(val, __FILE__, __LINE__)
# undef Tcl_NewObj
# define Tcl_NewObj() \
Tcl_DbNewObj(__FILE__, __LINE__)
# undef Tcl_NewStringObj
# define Tcl_NewStringObj(bytes, len) \
Tcl_DbNewStringObj(bytes, len, __FILE__, __LINE__)
# undef Tcl_NewWideIntObj
# define Tcl_NewWideIntObj(val) \
Tcl_DbNewWideIntObj(val, __FILE__, __LINE__)
#endif /* TCL_MEM_DEBUG */
/*
*----------------------------------------------------------------------------
* Macros for clients to use to access fields of hash entries:
*/
#define Tcl_GetHashValue(h) ((h)->clientData)
#define Tcl_SetHashValue(h, value) ((h)->clientData = (ClientData) (value))
#define Tcl_GetHashKey(tablePtr, h) \
((void *) (((tablePtr)->keyType == TCL_ONE_WORD_KEYS || \
(tablePtr)->keyType == TCL_CUSTOM_PTR_KEYS) \
? (h)->key.oneWordValue \
: (h)->key.string))
/*
* Macros to use for clients to use to invoke find and create functions for
* hash tables:
*/
#undef Tcl_FindHashEntry
#define Tcl_FindHashEntry(tablePtr, key) \
(*((tablePtr)->findProc))(tablePtr, (const char *)(key))
#undef Tcl_CreateHashEntry
#define Tcl_CreateHashEntry(tablePtr, key, newPtr) \
(*((tablePtr)->createProc))(tablePtr, (const char *)(key), newPtr)
/*
*----------------------------------------------------------------------------
* Macros that eliminate the overhead of the thread synchronization functions
* when compiling without thread support.
*/
#ifndef TCL_THREADS
#undef Tcl_MutexLock
#define Tcl_MutexLock(mutexPtr)
#undef Tcl_MutexUnlock
#define Tcl_MutexUnlock(mutexPtr)
#undef Tcl_MutexFinalize
#define Tcl_MutexFinalize(mutexPtr)
#undef Tcl_ConditionNotify
#define Tcl_ConditionNotify(condPtr)
#undef Tcl_ConditionWait
#define Tcl_ConditionWait(condPtr, mutexPtr, timePtr)
#undef Tcl_ConditionFinalize
#define Tcl_ConditionFinalize(condPtr)
#endif /* TCL_THREADS */
/*
*----------------------------------------------------------------------------
* Deprecated Tcl functions:
*/
#ifndef TCL_NO_DEPRECATED
/*
* These function have been renamed. The old names are deprecated, but we
* define these macros for backwards compatibilty.
*/
# define Tcl_Ckalloc Tcl_Alloc
# define Tcl_Ckfree Tcl_Free
# define Tcl_Ckrealloc Tcl_Realloc
# define Tcl_Return Tcl_SetResult
# define Tcl_TildeSubst Tcl_TranslateFileName
#if !defined(__APPLE__) /* On OSX, there is a conflict with "mach/mach.h" */
# define panic Tcl_Panic
#endif
# define panicVA Tcl_PanicVA
#endif /* !TCL_NO_DEPRECATED */
/*
*----------------------------------------------------------------------------
* Convenience declaration of Tcl_AppInit for backwards compatibility. This
* function is not *implemented* by the tcl library, so the storage class is
* neither DLLEXPORT nor DLLIMPORT.
*/
extern Tcl_AppInitProc Tcl_AppInit;
#endif /* RC_INVOKED */
/*
* end block for C++
*/
#ifdef __cplusplus
}
#endif
#endif /* _TCL */
/*
* Local Variables:
* mode: c
* c-basic-offset: 4
* fill-column: 78
* End:
*/
|